A Novel Approach to Monitor Nonstationary Dynamics in Physiological Signals: Application to Blood Pressure, Pulse Oximeter, and Respiratory Data

Quantification of error between the heartbeat intervals measured form photoplethysmogram and electrocardiogram by synchronisation

Currently, heartbeat intervals required for the analysis of heart rate variability (HRV) are derived from electrocardiogram (ECG). Many investigators have explored the possibility of using photoplethysmography (PPG), for the analysis of HRV. However, all these studies are based on statistical approach and have used the correlation coefficient for the comparison of HRV data obtained using ECG and PPG, which is inappropriate as the causal relationship between the R-peaks in ECG and the systolic peaks in PPG is well known in physiology. In this study, the heart beat intervals measured from PPG, are compared, beat by beat, with the corresponding beat intervals of same cardiac cycle obtained from the synchronously recorded ECG and the differences between them are taken as errors. These errors are verified to exactly match with the variations in the pulse transit times (PTTs), beat by beat. The error in the measurement of heartbeat intervals using PPG is quantified by obtaining the root mean square of the errors associated with each beat interval for a subject. The rms error, which is found to vary between 0.17 and 1.81% across the study group of 42 subjects, can be treated as insignificant, considering the nonstationary character of physiological signals. The errors are compared and interpreted with the variations in PTT. In view of these findings, PPG can be considered as a low cost, safe and more convenient alternative to ECG, as a wearable sensor outside hospital environment, for the analysis of HRV, without compromising on accuracy.

Breathing Rate Estimation From the Electrocardiogram and Photoplethysmogram: A Review

Breathing rate (BR) is a key physiological parameter used in a range of clinical settings. Despite its diagnostic and prognostic value, it is still widely measured by counting breaths manually. A plethora of algorithms have been proposed to estimate BR from the electrocardiogram (ECG) and pulse oximetry (photoplethysmogram, PPG) signals. These BR algorithms provide opportunity for automated, electronic, and unobtrusive measurement of BR in both healthcare and fitness monitoring. This paper presents a review of the literature on BR estimation from the ECG and PPG. First, the structure of BR algorithms and the mathematical techniques used at each stage are described. Second, the experimental methodologies that have been used to assess the performance of BR algorithms are reviewed, and a methodological framework for the assessment of BR algorithms is presented. Third, we outline the most pressing directions for future research, including the steps required to use BR algorithms in wearable sensors, remote video monitoring, and clinical practice.

Reliability of the Parabola Approximation Method in Heart Rate Variability Analysis Using Low-Sampling-Rate Photoplethysmography

Photoplethysmographic signals are useful for heart rate variability analysis in practical ambulatory applications. While reducing the sampling rate of signals is an important consideration for modern wearable devices that enable 24/7 continuous monitoring, there have not been many studies that have investigated how to compensate the low timing resolution of low-sampling-rate signals for accurate heart rate variability analysis. In this study, we utilized the parabola approximation method and measured it against the conventional cubic spline interpolation method for the time, frequency, and nonlinear domain variables of heart rate variability. For each parameter, the intra-class correlation, standard error of measurement, Bland-Altman 95% limits of agreement and root mean squared relative error were presented. Also, elapsed time taken to compute each interpolation algorithm was investigated. The results indicated that parabola approximation is a simple, fast, and accurate algorithm-based method for compensating the low timing resolution of pulse beat intervals. In addition, the method showed comparable performance with the conventional cubic spline interpolation method. Even though the absolute value of the heart rate variability variables calculated using a signal sampled at 20 Hz were not exactly matched with those calculated using a reference signal sampled at 250 Hz, the parabola approximation method remains a good interpolation method for assessing trends in HRV measurements for low-power wearable applications.

Cardiac signal estimation based on the arterial and venous pressure signals of a hemodialysis machine

Continuous cardiac monitoring is usually not performed during hemodialysis treatment, although a majority of patients with kidney failure suffer from cardiovascular disease. In the present paper, a method is proposed for estimating a cardiac pressure signal by combining the arterial and the venous pressure sensor signals of the hemodialysis machine. The estimation is complicated by the periodic pressure disturbance caused by the peristaltic blood pump, with an amplitude much larger than that of the cardiac pressure signal. Using different techniques for combining the arterial and venous pressure signals, the performance is evaluated and compared to that of an earlier method which made use of the venous pressure only. The heart rate and the heartbeat occurrence times, determined from the estimated cardiac pressure signal, are compared to the corresponding quantities determined from a photoplethysmographic reference signal. Signals from 9 complete hemodialysis treatments were analyzed. For a heartbeat amplitude of 0.5 mmHg, the median absolute deviation between estimated and reference heart rate was 1.3 bpm when using the venous pressure signal only, but dropped to 0.6 bpm when combining the pressure signals. The results show that the proposed method offers superior estimation at low heartbeat amplitudes. Consequently, more patients can be successfully monitored during treatment without the need of extra sensors. The results are preliminary, and need to be verified on a separate dataset.

Noninvasive techniques for prevention of intradialytic hypotension

Episodes of hypotension during hemodialysis treatment constitutes an important clinical problem which has received considerable attention in recent years. Despite the fact that numerous approaches to reducing the frequency of intradialytic hypotension (IDH) have been proposed and evaluated, the problem has not yet found a definitive solution--an observation which, in particular, applies to episodes of acute, symptomatic hypotension. This overview covers recent advances in methodology for predicting and preventing IDH. Following a brief overview of well-established hypotension-related variables, including blood pressure, blood temperature, relative blood volume, and bioimpedance, special attention is given to electrocardiographic and photoplethysmographic (PPG) variables and their significance for IDH prediction. It is concluded that cardiovascular variables which reflect heart rate variability, heart rate turbulence, and baroreflex sensitivity are important to explore in feedback control hemodialysis systems so as to improve their performance. The analysis of hemodialysis-related changes in PPG pulse wave properties hold considerable promise for improving prediction.

Deriving respiration from photoplethysmographic pulse width

A method for deriving respiration from the pulse photoplethysmographic (PPG) signal is presented. This method is based on the pulse width variability (PWV), and it exploits the respiratory information present in the pulse wave velocity and dispersion. It allows to estimate respiration signal from only a pulse oximeter which is a cheap and comfortable sensor. Evaluation is performed over a database containing electrocardiogram (ECG), blood pressure (BP), PPG, and respiratory signals simultaneously recorded in 17 subjects during a tilt table test. Respiratory rate estimation error is computed obtaining of 1.27 ± 7.81% (0.14 ± 14.78 mHz). For comparison purposes, we have also obtained a respiratory rate estimation from other known methods which involve ECG, BP, or also PPG signals. In addition, we have also combined respiratory information derived from different methods which involve only PPG signal, obtaining a respiratory rate error of -0.17 ± 6.67% (-2.16 ± 12.69 mHz). The presented methods, PWV and combination of PPG derived respiration methods, avoid the need of ECG to derive respiration without degradation of the obtained estimates, so it is possible to have reliable respiration rate estimates from just the PPG signal.

Automatic motion and noise artifact detection in Holter ECG data using empirical mode decomposition and statistical approaches

We present a real-time method for the detection of motion and noise (MN) artifacts, which frequently interferes with accurate rhythm assessment when ECG signals are collected from Holter monitors. Our MN artifact detection approach involves two stages. The first stage involves the use of the first-order intrinsic mode function (F-IMF) from the empirical mode decomposition to isolate the artifacts' dynamics as they are largely concentrated in the higher frequencies. The second stage of our approach uses three statistical measures on the F-IMF time series to look for characteristics of randomness and variability, which are hallmark signatures of MN artifacts: the Shannon entropy, mean, and variance. We then use the receiver-operator characteristics curve on Holter data from 15 healthy subjects to derive threshold values associated with these statistical measures to separate between the clean and MN artifacts' data segments. With threshold values derived from 15 training data sets, we tested our algorithms on 30 additional healthy subjects. Our results show that our algorithms are able to detect the presence of MN artifacts with sensitivity and specificity of 96.63% and 94.73%, respectively. In addition, when we applied our previously developed algorithm for atrial fibrillation (AF) detection on those segments that have been labeled to be free from MN artifacts, the specificity increased from 73.66% to 85.04% without loss of sensitivity (74.48%-74.62%) on six subjects diagnosed with AF. Finally, the computation time was less than 0.2 s using a MATLAB code, indicating that real-time application of the algorithms is possible for Holter monitoring.