Transitional Flow in the Venous Side of Patient-Specific Arteriovenous Fistulae for Hemodialysis

Toward a physiological model of vascular wall vibrations in the arteriovenous fistula

The mechanism behind hemodialysis arteriovenous fistula (AVF) failure remains poorly understood, despite previous efforts to correlate altered hemodynamics with vascular remodeling. We have recently demonstrated that transitional flow induces high-frequency vibrations in the AVF wall, albeit with a simplified model. This study addresses the key limitations of our original fluid-structure interaction (FSI) approach, aiming to evaluate the vibration response using a more realistic model. A 3D AVF geometry was generated from contrast-free MRI and high-fidelity FSI simulations were performed. Patient-specific inflow and pressure were incorporated, and a three-term Mooney-Rivlin model was fitted using experimental data. The viscoelastic effect of perivascular tissue was modeled with Robin boundary conditions. Prescribing pulsatile inflow and pressure resulted in a substantial increase in vein displacement ( + 400 %) and strain ( + 317 %), with a higher maximum spectral frequency becoming visible above -42 dB (from 200 to 500 Hz). Transitioning from Saint Venant-Kirchhoff to Mooney-Rivlin model led to displacement amplitudes exceeding 10 micrometers and had a substantial impact on strain ( + 116 %). Robin boundary conditions significantly damped high-frequency displacement ( - 60 %). Incorporating venous tissue properties increased vibrations by 91%, extending up to 700 Hz, with a maximum strain of 0.158. Notably, our results show localized, high levels of vibration at the inner curvature of the vein, a site known for experiencing pronounced remodeling. Our findings, consistent with experimental and clinical reports of bruits and thrills, underscore the significance of incorporating physiologically plausible modeling approaches to investigate the role of wall vibrations in AVF remodeling and failure.

Modelling lower-limb peripheral arterial disease using clinically available datasets: impact of inflow boundary conditions on hemodynamic indices for restenosis prediction

BACKGROUND AND OBJECTIVES

The integration of hemodynamic markers as risk factors in restenosis prediction models for lower-limb peripheral arteries is hindered by fragmented clinical datasets. Computed tomography (CT) scans enable vessel geometry reconstruction and can be obtained at different times than the Doppler ultrasound (DUS) images, which provide information on blood flow velocity. Computational fluid dynamics (CFD) simulations allow the computation of near-wall hemodynamic indices, whose accuracy depends on the prescribed inlet boundary condition (BC), derived from the DUS images. This study aims to: (i) investigate the impact of different DUS-derived velocity waveforms on CFD results; (ii) test whether the same vessel areas, subjected to altered hemodynamics, can be detected independently of the applied inlet BC; (iii) suggest suitable DUS images to obtain reliable CFD results.

METHODS

CFD simulations were conducted on three patients treated with bypass surgery, using patient-specific DUS-derived inlet BCs recorded at either the same or different time points than the CT scan. The impact of the chosen inflow condition on bypass hemodynamics was assessed in terms of wall shear stress (WSS)-derived quantities. Patient-specific critical thresholds for the hemodynamic indices were applied to identify critical luminal areas and compare the results with a reference obtained with a DUS image acquired in close temporal proximity to the CT scan.

RESULTS

The main findings indicate that: (i) DUS-derived inlet velocity waveforms acquired at different time points than the CT scan led to statistically significantly different CFD results (p<0.001); (ii) the same luminal surface areas, exposed to low time-averaged WSS, could be identified independently of the applied inlet BCs; (iii) similar outcomes were observed for the other hemodynamic indices if the prescribed inlet velocity waveform had the same shape and comparable systolic acceleration time to the one recorded in close temporal proximity to the CT scan.

CONCLUSIONS

Despite a lack of standardised data collection for diseased lower-limb peripheral arteries, an accurate estimation of luminal areas subjected to altered near-wall hemodynamics is possible independently of the applied inlet BC. This holds if the applied inlet waveform shares some characteristics - derivable from the DUS report - as one matching the acquisition time of the CT scan.

Computational fluid-structure interaction analysis of the end-to-side radio-cephalic arteriovenous fistula

BACKGROUND AND OBJECTIVE

In the current work, we present a descriptive fluid-structure interaction computational study of the end-to-side radio-cephalic arteriovenous fistula. This allows us to account for the different thicknesses and elastic properties of the radial artery and cephalic vein.

METHODS

The core of the work consists in simulating different arteriovenous fistula configurations obtained by virtually varying the anastomosis angle, i.e. the angle between the end of the cephalic vein and the side of the radial artery. Since the aim of the work is to understand the blood dynamics in the very first days after the surgical intervention, the radial artery is considered stiffer and thicker than the cephalic vein.

RESULTS

Our results demonstrate that both the diameter of the cephalic vein and the anastomosis angle play a crucial role to obtain a blood dynamics without re-circulation regions that could prevent fistula failure.

CONCLUSIONS

When an anastomosis angle close to the perpendicular direction with respect to the radial artery is combined with a large diameter of the cephalic vein, the recirculation regions and the low Wall Shear Stress (WSS) zones are reduced. Conversely, from a structural point of view, a low anastomosis angle with a large diameter of the cephalic vein reduces the mechanical stress acting on the vessel walls.

Identifying problematic arteriovenous fistula with CFD-derived resistance: An exploratory study

Arteriovenous fistula (AVF) is the optimal form of vascular access for most haemodialysis dependant patients; however, it is prone to the formation of stenoses that compromise utility and longevity. Whilst there are many factors influencing the development of these stenoses, pathological flow-related phenomena may also incite the formation of intimal hyperplasia, and hence a stenosis. Repeated CFD-derived resistance was calculated for six patient who had a radiocephalic AVF, treated with an interwoven nitinol stent around the juxta-anastomotic region to address access dysfunction. A three-dimensional freehand ultrasound system was used to obtain patient-specific flow profiles and geometries, before performing CFD simulations to replicate the flow phenomena in the AVF, which enabled the calculation of CFD-derived resistance. We presented six patient cases who were examined before and after treatment and our results showed a 77% decrease in resistance, recorded after a surgical intervention to address access dysfunction. Problematic AVFs were found to have high resistance, particularly in the venous segment. AVFs with no reported clinical problems, and clinical patency, had low resistance in the venous segment. There did not appear to be any relationship with clinical problems/patency and resistance values in the arterial segment. Identifying changes in resistance along the circuit allowed stenoses to be identified, independent to that determined using standard sonographic criteria. Our exploratory study reveals thatCFD-derived resistance is a promising metric that allows for non-invasive identification of diseased AVFs. The pipeline analysis enabled regular surveillance of AVF to be studied to aid with surgical planning and outcome, further exhibiting its clinical utility.

Sensitivity of Post-TAVR Hemodynamics to the Distal Aortic Arch Anatomy: A High-Fidelity CFD Study

PURPOSE

Patient-specific simulations of transcatheter aortic valve (TAV) using computational fluid dynamics (CFD) often rely on assumptions regarding proximal and distal anatomy due to the limited availability of high-resolution imaging away from the TAV site and the primary research focus being near the TAV. However, the influence of these anatomical assumptions on computational efficiency and resulting flow characteristics remains uncertain. This study aimed to investigate the impact of different distal aortic arch anatomies-some of them commonly used in literature-on flow and hemodynamics in the vicinity of the TAV using large eddy simulations (LES).

METHODS

Three aortic root anatomical configurations with four representative distal aortic arch types were considered in this study. The arch types included a 90-degree bend, an idealized distal aortic arch anatomy, a clipped version of the idealized distal aortic arch, and an anatomy extruded along the normal of segmented anatomical boundary. Hemodynamic parameters both instantaneous and time-averaged such as Wall Shear Stress (WSS), and Oscillatory Shear Index (OSI) were derived and compared from high-fidelity CFD data.

RESULTS

While there were minor differences in flow and hemodynamics across the configurations examined, they were generally not significant within our region of interest i.e., the aortic root. The choice of extension type had a modest impact on TAV hemodynamics, especially in the vicinity of the TAV with variations observed in local flow patterns and parameters near the TAV. However, these differences were not substantial enough to cause significant deviations in the overall flow and hemodynamic characteristics.

CONCLUSIONS

The results suggest that under the given configuration and boundary conditions, the type of outflow extension had a modest impact on hemodynamics proximal to the TAV. The findings contribute to a better understanding of flow dynamics in TAV configurations, providing insights for future studies in TAV-related experiments as well as numerical simulations. Additionally, they help mitigate the uncertainties associated with patient-specific geometries, offering increased flexibility in computational modeling.

Stenosis to stented: decrease in flow disturbances following stent implantation of a diseased arteriovenous fistula

The arteriovenous fistula (AVF) is commonly faced with stenosis at the juxta-anastomotic (JXA) region of the vein. Implantation of a flexible nitinol stent across the stenosed JXA has led to the retention of functioning AVFs leading to the resulting AVF geometry being distinctly altered, thereby affecting the haemodynamic environment within it. In this study, large eddy simulations of the flow field within a patient-specific AVF geometry before and after stent implantation were conducted to detail the change in flow features. Although the diseased AVF had much lower flow rates, adverse flow features, such as recirculation zones and swirling flow at the anastomosis, and jet flow at the stenosis site were present. Larger velocity fluctuations (leading to higher turbulent kinetic energy) stemming from these flow features were apparent in the diseased AVF compared to the stented AVF. The unsteadiness at the stenosis created large regions of wall shear stress (WSS) fluctuations downstream of the stenosis site that were not as apparent in the stented AVF geometry. The larger pressure drop across the diseased vein, compared to the stented vein, was primarily caused by the constriction at the stenosis, potentially causing the lower flow rate. Furthermore, the WSS fluctuations in the diseased AVF could lead to further disease progression downstream of the stenosis. The change in bulk flow unsteadiness, pressure drop, and WSS behaviour confirms that the haemodynamic environment of the diseased AVF has substantially improved following the flexible stent implantation.

Flow-induced high frequency vascular wall vibrations in an arteriovenous fistula: a specific stimulus for stenosis development?

Hemodialysis is the lifeline for nearly three million end stage renal disease patients worldwide. Native arteriovenous fistula (AVF) is the preferred vascular access, but 40% fail within 1 year. We recently demonstrated that AVFs harbour transitional flows and the goal of the present study was to investigate whether the associated high-frequency pressure fluctuations could promote vibrations within the vascular wall. We acquired MRI images and flow rates immediately after surgery in one patient and generated a 3D patient-specific model. High-fidelity fluid structure interaction simulations revealed the presence of wall vibrations in distinct frequency bands up to 200 Hz and amplitude of 200 μm. A sensitivity analysis to assess the impact of flow rates, and vascular wall stiffness and thickness, changes that typically occur during AVF maturation, confirmed the robustness of the results. Interestingly, the vibrations were always predominant at the anastomosis floor and on the inner venous side, which correlates with typical stenotic regions. As studies seeking to correlate aberrant stresses and vascular remodelling have been largely inconclusive, the focal colocalization between vibrations and stenosis may suggest an unknown mechanobiological process between high-frequency mechanical stresses within the vascular wall and adverse vascular remodelling.

Arteriovenous fistula creation with VasQTM device: A feasibility study to reveal hemodynamic implications

BACKGROUND

Arteriovenous fistula (AVF) is the preferred vascular access (VA) for hemodialysis, but it is still affected by high non-maturation and early failure rates due to stenosis development. Increasing evidence suggests that the presence of turbulent-like flow may play a key role, therefore, to stabilize the flow in the venous segment, an external support device (VasQTM) has been designed. The aim of this study was to provide preliminary evidence of VasQTM impact on AVF hemodynamics as compared to AVFs created with conventional surgery.

METHODS

In this pilot single-center prospective randomized study six patients were enrolled, three in the VasQ group and three in the control group. Contrast-free magnetic resonance imaging (MRI) scans were acquired at 3 days, 3 months and 1 year after AVF surgery and were used to generate 3D patient-specific models. Computational fluid dynamic (CFD) simulations were performed using pimpleFoam, imposing patient-specific flow waveforms derived from ultrasound (US) examinations at the inlet of the proximal and distal artery, and a traction-free condition at the venous outflow. Morphologic and hemodynamic changes occurring over time were compared between VasQ and control AVFs.

RESULTS

Our MRI protocol provided high-quality images suitable for reliable segmentation and reconstruction of patient-specific 3D models of AVFs at all three timepoints in four out of six patients. The VasQTM device maintained the angle between the artery and the vein almost unchanged over time, with a more stable flow in the AVFs supported by the device. In contrast, one of the AVFs of the control group evolved to an extreme dilatation of the vein and highly disturbed flow, while the other developed a stenosis in the juxta-anastomotic region.

CONCLUSIONS

This study demonstrated the feasibility of characterizing the morphological and hemodynamic changes occurring over time in AVFs created using the VasQTM device and provided preliminary evidence of the potential hemodynamic benefits of its use.

VasQ U.S. pivotal study demonstrates the safety and effectiveness of an external vascular support for arteriovenous fistula creation

OBJECTIVE

Arteriovenous fistula (AVF) creation is a commonly performed vascular operation that reports 6-month functional success rates as low as 50%. Recently, a nitinol external vascular support device, VasQ, has shown potential in studies outside the United States (U.S.) to improve AVF outcomes when implanted at creation. Here, the pivotal study results of this novel technology in treating patients in the U.S. are described.

METHODS

VasQ was implanted in 144 patients at 16 centers across the U.S. who were referred for creation of a new AVF and consented for enrollment in a 2-year, prospective, multicenter, single-arm, open-label study. Brachiocephalic (n = 129) and radiocephalic (n = 15) AVFs were analyzed. The primary endpoint was primary patency at 6 months compared against a performance goal of 55% derived from a systematic literature search. Safety endpoints included device-related events, ischemic steal, infection, aneurysm, and seroma at up to 6 months. Minimum arterial size was 2.0 mm; target veins were required to measure 2.5 to 6 mm. Key exclusion criteria were patients <18 or >80 years, those with known ipsilateral central venous occlusion, target cannulation zone venous depth greater than 8 mm, and New York Heart Association class 3 or 4.

RESULTS

Patients were 61% male, 53% White, 35% African American, and 14% Hispanic. Mean age was 60 years, and median body mass index was 30.4. Of the patients, 69% were diabetic, 66% were on dialysis at the time of creation, and 70% had a prior access surgery. At 6 months, steal was observed in 2.1%, infection in 0.7%, and no aneurysms or seromas were seen. Primary patency at 6 months was 66% (P < .021 vs performance goal). Physiological maturation was achieved in 92.4% of patients. Successful two-needle cannulation for patients that entered the study on dialysis was achieved in 88% of VasQ AVFs at a median of 56 days. Pre-dialysis patients who initiated dialysis during the study achieved two-needle cannulation in 81.6% VasQ AVFs. Interventions were required at a rate of 1.07 per patient year over the entire study period. Two-year cumulative patency was 76.6% (95% confidence interval, 67.9%-83.4%) with no statistical difference between patients requiring interventions and those that did not. No patency differences were observed between brachiocephalic and radiocephalic AVFs.

CONCLUSIONS

The U.S. pivotal study results demonstrated improved AVF outcomes and an excellent safety profile with VasQ use relative to traditional AVFs. Under the conditions of this trial, VasQ shows great promise in expeditiously and efficiently enhancing AVF functional success.

Hemodynamics in AVF over time: A protective role of vascular remodeling toward flow stabilization

The mechanisms underlying vascular stenosis formation in the arteriovenous fistula (AVF) for hemodialysis (HD) remain mostly unknown. Several computational fluid dynamics (CFD) studies have suggested a potential role for unsteady flow in inducing intimal hyperplasia and AVF stenosis, but the majority of these observations have been limited to a single time point after surgical creation. The aim of the present study was to investigate the relation between hemodynamic conditions and AVF vascular remodeling through a CFD longitudinal study. Non contrast-enhanced MR images and Doppler Ultrasound (US) examinations were acquired at 3 days, 40 days, 6 months, 1 year, and 1.5 years after surgery in a 72-year male referred for native radio-cephalic AVF. Three-dimensional AVF models were generated and high fidelity CFD simulations were performed using pimpleFoam, setting patient-specific boundary conditions derived from US. Morphological and hemodynamic changes over time were then analyzed. Analysis of vessel morphology and hemodynamics during follow-up showed that the AVF had a successful maturation process, characterized by a massive arterial and venous dilatation within the 6 months after surgery, a corresponding increase in blood flow volume and important flow instabilities. Between 6 months and 1 year, a stenosis developed in the juxta-anastomotic vein and caused AVF failure at 1.5 years. The development of stenosis was paralleled by the regularization of blood flow velocity pattern and consequent decrease in the near-wall disturbed flow metrics. These results suggest that development of intimal hyperplasia and vessel stenosis, triggered by unsteady flow, could be the result of vascular inward remodeling toward regularization of turbulent-like flow.

Spiral Laminar Flow is Associated with a Reduction in Disturbed Shear in Patient-Specific Models of an Arteriovenous Fistula

PURPOSE

Areas of disturbed shear that arise following arteriovenous fistula (AVF) creation are believed to contribute to the development of intimal hyperplasia (IH). The presence of helical flow can suppress areas of disturbed shear, which may protect the vasculature from IH. Therefore, the aim of this study is to determine if helical flow, specifically spiral laminar flow (SLF), is present in patient-specific AVF models and is associated with a reduction in exposure to disturbed shear.

METHODS

Four AVF were imaged using MRI within the first two weeks following fistula creation. Patient-specific boundary conditions were obtained using phase-contrast MRI and applied at the inlet and outlets of each model. Computational fluid dynamics was used to analyse the hemodynamics in each model and compare the helical content of the flow to the distribution of disturbed shear.

RESULTS

BC-1 and RC-2 are characterised by the presence of SLF, which coincides with the lowest distribution of disturbed shear. Contrastingly, SLF is absent from BC-2 and RC-1 and experience the largest amount of disturbed shear. Interestingly, BC-2 and RC-1 developed an anastomosis stenosis, while BC-1 and RC-2 remained stenosis free.

CONCLUSION

These findings are in agreement with previous clinical studies and further highlight the clinical potential of SLF as a prognostic marker for a healthy AVF, as its presence correlates with an overall reduction in exposure to disturbed shear and a decrease in the incidence of AVF dysfunction, albeit in a small sample size.

Association of Shear Stress with Subsequent Lumen Remodeling in Hemodialysis Arteriovenous Fistulas

BACKGROUND

Blood flow-induced wall shear stress is a strong local regulator of vascular remodeling, but its effects on arteriovenous fistula (AVF) remodeling are unclear.

METHODS

In this prospective cohort study, we used computational fluid dynamics simulations and statistical mixed-effects modeling to investigate the associations between wall shear stress and AVF remodeling in 120 participants undergoing AVF creation surgery. Postoperative magnetic resonance imaging data at 1 day, 6 weeks, and 6 months were used to derive current wall shear stress by computational fluid dynamic simulations and to quantify subsequent changes in AVF lumen cross-sectional area at 1-mm intervals along the proximal artery and AVF vein.

RESULTS

Combining artery and vein data, prior mean wall shear stress was significantly associated with lumen area expansion. Mean wall shear stress at day 1 was significantly associated with change in lumen area from day 1 to week 6 (11% larger area per interquartile range [IQR] higher mean wall shear stress, 95% confidence interval [95% CI], 5% to 18%; n =101), and mean wall shear stress at 6 weeks was significantly associated with change in lumen area from 6 weeks to month 6 (14% larger area per IQR higher, 95% CI, 3% to 28%; n =52). The association of mean wall shear stress at day 1 with lumen area expansion from day 1 to week 6 differed significantly by diabetes ( P =0.009): 27% (95% CI, 17% to 37%) larger area per IQR higher mean wall shear stress without diabetes and 9% (95% CI, -1% to 19%) with diabetes. Oscillatory shear index at day 1 was significantly associated with change in lumen area from day 1 to week 6 (5% smaller area per IQR higher oscillatory shear index, 95% CI, 3% to 7%), and oscillatory shear index at 6 weeks was significantly associated with change in lumen from 6 weeks to month 6 (7% smaller area per IQR higher oscillatory shear index, 95% CI, 2% to 11%). Wall shear stress spatial gradient was not significantly associated with subsequent remodeling. In a joint model, wall shear stress and oscillatory shear index statistically significantly interacted in their associations with lumen area expansion in a complex nonlinear fashion.

CONCLUSIONS

Higher wall shear stress and lower oscillatory shear index were associated with greater lumen expansion after AVF creation surgery.

Differential hemodynamics between arteriovenous fistulas with or without intervention before successful use

A significant number of arteriovenous fistulas (AVFs) fail to maturate for dialysis. Although interventions promote maturation, functional primary patency loss is higher for AVFs with interventions (assisted maturation) than AVFs without interventions (un-assisted maturation). Although blood flow-associated hemodynamics have long been proposed to affect AVF remodeling, the optimal hemodynamic parameters for un-assisted maturation are unclear. Additionally, AVF maturation progress is generally not investigated until 6 weeks after AVF creation, and the examination is focused on the AVF's venous limb. In this exploratory study, patients (n = 6) underwent magnetic resonance imaging (MRI) at 1 day, 6 weeks, and 6 months after AVF creation surgery. Before successful use for hemodialysis, three AVFs required intervention and three did not. MRI of the AVFs were used to calculate lumen cross-sectional area (CSA) and perform computational fluid dynamics (CFD) to analyze hemodynamics, including velocity, wall shear stress (WSS), and vorticity. For the venous limb, the no-intervention group and intervention group had similar pre-surgery vein diameter and 1-day post-surgery venous CSA. However, the no-intervention group had statistically larger 1-day venous velocity (0.97 ± 0.67 m/s; mean ± SD), WSS (333 ± 336 dyne/cm2) and vorticity (1709 ± 1290 1/s) than the intervention group (velocity = 0.23 ± 0.10 m/s; WSS = 49 ± 40 dyne/cm2; vorticity = 493.1 ± 227 1/s) (P < 0.05). At 6 months, the no-intervention group had statistically larger venous CSA (43.5 ± 27.4 mm2) than the intervention group (15.1 ± 6.2 mm2) (P < 0.05). Regarding the arterial limb, no-intervention AVF arteries also had statistically larger 1-day velocity (1.17 ± 1.0 m/s), WSS (340 ± 423 dyne/cm2), vorticity (1787 ± 1694 1/s), and 6-month CSA (22.6 ± 22.7 mm2) than the intervention group (velocity = 0.64 ± 0.36 m/s; WSS = 104 ± 116 dyne/cm2, P < 0.05; vorticity = 867 ± 4551/s; CSA = 10.7 ± 6.0 mm2, P < 0.05). Larger venous velocity, WSS, and vorticity immediately after AVF creation surgery may be important for later lumen enlargement and AVF maturation, with the potential to be used as a tool to help diagnose poor AVF maturation earlier. However, future studies using a larger cohort are needed to validate this finding and determine cut off values, if any.

A longitudinal study of the arterio-venous fistula maturation of a single patient over 15 weeks

Arterio-venous fistula creation is the preferred vascular access for haemodialysis, but has a large failure rate in the maturation period. Previous research, considering the remodelling mechanisms for failure-to-mature patients, has been limited by obtaining the patient-specific boundary conditions at only a few points in the patient history. Here, a non-invasive imaging system was used to reconstruct the three-dimensional vasculature, and computational fluid dynamics was used to analyse the haemodynamics for one patient over 15 weeks. The analysis suggested evidence of a control mechanism, which adjusts the lumen diameter to keep the wall shear stress near constant in the proximal regions of the vein and artery. Additionally, the vein and artery were shown to remodel at different growth rates, and the blood flow rate also saw the largest increase within the first week. Wall shear stress at time of creation may be a useful indicator for successful AVF maturation.

Prediction of the anastomosis angle of arteriovenous fistula in hemodialysis to standardize the surgical technique

BACKGROUND: Arteriovenous fistula (AVF) is the preferred route of vascular access in hemodialysis. The primary reason of fistula failure is Intimal hyperplasia (IH), which leads to stenosis. Wall shear stress (WSS) and disturbed flow are the critical parameters in the formation of IH. OBJECTIVE: The primary goal of this study is to explore the influence of anastomosis angle on WSS and venous outflow rate, as well as to find the ideal angle of anastomosis for AVF to standardize surgical technique. METHODS: Three-dimensional idealized geometries of end-to-side type AVF for the five various angles of anastomosis are considered in this study. The WSS, blood flow rate at the venous outlet for non-Newtonian, pulsatile blood flow are calculated using a numerical simulation technique. RESULTS: The WSS is higher at 75° compared to other angles and least at 45° for pulsating arterial inflows. The WSS is moderate at 30°, 60° and 90°. On the arterial bed and outer wall of the vein, immediately after the anastomosis, the recirculation zone is observed. At an angle of 45° and 90° anastomosis, the outflow rate is greater at distal venous end. CONCLUSIONS: If one believes that high wall shear stress causes IH within the AVF, the results suggest that the AVF should be formed at a 45° angle to avoid IH. However, if one believes that low wall shear stress causes IH within the AVF, the results suggest that AVF should be formed at either 30° or 75° to avoid IH. The findings spotlight the importance of anastomosis angle in determining AVF hemodynamics.

Tissue Ki67 proliferative index expression and pathological changes in hemodialysis arteriovenous fistulae: Preliminary single-center results

BACKGROUND

Arteriovenous fistula (AVF) for hemodialysis integrates outward remodeling with vessel wall thickening in response to drastic hemodynamic changes. Aim of this study is to determine the role of Ki67, a well-established proliferative marker, related to AVF, and its relationship with time-dependent histological morphologic changes.

MATERIALS AND METHODS

All patients were enrolled in 1 year and stratified in two groups: (A) pre-dialysis patients submitted to first AVF and (B) patients submitted to revision of AVF. Morphological changes: neo-angiogenesis (NAG), myointimal thickening (MIT), inflammatory infiltrate (IT), and aneurysmatic fistula degeneration (AD). The time of AVF creation was recorded. A biopsy of native vein in Group A and of arterialized vein in Group B was submitted to histological and immunohistochemical (IHC) analysis. IHC for Ki67 was automatically performed in all specimens. Ki67 immunoreactivity was assessed as the mean number of positive cells on several high-power fields, counted in the hot spots.

RESULTS

A total of 138 patients were enrolled, 69 (50.0%) Group A and 69 (50.0%) Group B. No NAG or MIT were found in Group A. Seven (10.1%) Group A veins showed a mild MIT. Analyzing the Group B, a moderate-to-severe MIT was present in 35 (50.7%), IT in 19 (27.5%), NAG in 37 (53.6%); AD was present in 10 (14.5%). All AVF of Group B with the exception of one (1.4%) showed a positivity for Ki67, with a mean of 12.31 ± 13.79 positive cells/hot spot (range 0-65). Ki67-immunoreactive cells had a subendothelial localization in 23 (33.3%) cases, a myointimal localization in SMC in 35 (50.7%) cases. The number of positive cells was significantly correlated with subendothelial localization of Ki67 (p = 0.001) and with NA (p = 0.001).

CONCLUSIONS

Native veins do not contain cycling cells. In contrast, vascular cell proliferation starts immediately after AVF creation and persists independently of the time the fistula is set up. The amount of proliferating cells is significantly associated with MIT and subendothelial localization of Ki67-immunoreactive cells, thus suggesting a role of Ki-67 index in predicting AVF failure.

Computer assisted Doppler waveform analysis and ultrasound derived turbulence intensity ratios can predict early hyperplasia development in newly created vascular access fistula: Pilot study, methodology and analysis

Objectives

Following surgical creation of arterio-venous fistulae (AVF), the desired outward remodeling is often accompanied by the development of neointimal hyperplasia (NIH), which can stymie maturation and may lead to thrombosis and access failure. The aim of this study was to investigate the feasibility of using a non-invasive test, to detect and quantify the turbulent flow patterns believed to be associated with NIH development.

Design

This was a prospective, observational study. Ultrasound derived turbulence intensity ratios (USTIR) were calculated from spectral Doppler waveforms, recorded from newly formed AVF, and were compared with haemodynamic and structural changes observed during the initial maturation period.

Setting

Measurements were obtained by accredited Clinical Vascular Scientists, at the Royal Free Hospital, London.

Participants

Patients with newly created AVF were invited to participate in the study. A total of 30 patients were initially recruited with 19 participants completing the 10 week study protocol.

Outcome measures

The primary outcome measure was the development of NIH resulting in a haemodynamically significant lesion.The secondary outcome was successful maturation of the AVF at 10 weeks.

Results

Elevated USTIR in the efferent vein 2 weeks post surgery corresponded to the development of NIH formation (P = 0.02). A cut off of 6.39% predicted NIH development with a sensitivity of 87.5% and a specificity of 80%.

Conclusion

Analysis of Doppler waveforms can successfully identify deleterious flow patterns and predict inward luminal remodelling in maturing AVF. We propose a longitudinal follow up study to assess the viability of this technique as a surveillance tool.

Arteriovenous fistula maturation and the influence of fluid dynamics

Arteriovenous fistula creation is the preferred vascular access for haemodialysis therapy, but has a large failure rate in the maturation period. This period generally lasts 6 to 8 weeks after surgical creation, in which the vein and artery undergo extensive vascular remodelling. In this review, we outline proposed mechanisms for both arteriovenous fistula maturation and arteriovenous fistula failure. Clinical, animal and computational studies have not yet shown a definitive link between any metric and disease development, although a number of theories based on wall shear stress metrics have been suggested. Recent work allowing patient-based longitudinal studies may hold the key to understanding arteriovenous fistula maturation processes.

Single Cell Analysis in Vascular Biology

The ability to quantify DNA, RNA, and protein variations at the single cell level has revolutionized our understanding of cellular heterogeneity within tissues. Via such analyses, individual cells within populations previously thought to be homogeneous can now be delineated into specific subpopulations expressing unique sets of genes, enabling specialized functions. In vascular biology, studies using single cell RNA sequencing have revealed extensive heterogeneity among endothelial and mural cells even within the same vessel, key intermediate cell types that arise during blood and lymphatic vessel development, and cell-type specific responses to disease. Thus, emerging new single cell analysis techniques are enabling vascular biologists to elucidate mechanisms of vascular development, homeostasis, and disease that were previously not possible. In this review, we will provide an overview of single cell analysis methods and highlight recent advances in vascular biology made possible through single cell RNA sequencing.

Smart Flow for the evaluation of the hemodialysis arteriovenous fistula

BACKGROUND

Smart Flow is an innovative tool available on the Carestream Touch Prime Ultrasound machines, which provides automated blood flow measurement and shows the vectors that form the blood flow in the vessel. We compared the use of Smart Flow with traditional Duplex Doppler Ultrasound to evaluate blood flow of arteriovenous fistulas in prevalent hemodialysis patients.

METHODS

A total of 31 chronic patients on hemodialysis were enrolled. Blood flow was measured on the brachial artery with Smart Flow and duplex Doppler ultrasound. In a subset of 26 patients, a video of the juxta-anastomotic efferent vein was recorded and analyzed to calculate an index of flow turbulence.

RESULTS

We enrolled 21 males and 10 females aged 68.52 ± 11.64 years at the time of evaluation with an average arteriovenous fistulas vintage of 50.23 ± 47.42 months and followed them up for 18.03 ± 5.18 months. Smart Flow and Duplex Doppler Ultrasound blood flow measurements positively correlated (p < 0.0001) in the same patient but Smart Flow gave higher blood flow values (995.0 vs 730.3 mL/min, p < 0.0001), and the Duplex Doppler Ultrasound blood flow standard deviation was similar to Smart Flow (125.4 vs 114.4 mL/min, p < 0.0001). The time needed to evaluate arteriovenous fistulas with Smart Flow was significantly shorter than Duplex Doppler Ultrasound (67.58 ± 19.89 vs 146.3 ± 26.35 s, p < 0.0001). No correlation was found between blood flow turbulence and the subsequent access failure.

CONCLUSION

Smart Flow is reliable, reproducible, and faster than traditional duplex ultrasound. However, the additional information given by the Smart Flow technique does not seem to add any further benefits in terms of prediction of the access failure.

The presence of helical flow can suppress areas of disturbed shear in parameterised models of an arteriovenous fistula

Areas of disturbed shear that develop following arteriovenous fistula (AVF) creation are believed to trigger the onset of intimal hyperplasia (IH), leading to AVF dysfunction. The presence of helical flow can suppress the flow disturbances that lead to disturbed shear in other areas of the vasculature. However, the relationship between helical flow and disturbed shear remains unevaluated in AVF. In this study, computational fluid dynamics (CFD) is used to evaluate the relationship between geometry, helical flow, and disturbed shear in parameterised models of an AVF characterised by four different anastomosis angles. The AVF models with a small anastomosis angle demonstrate the lowest distribution of low/oscillating shear and are characterised by a high helical intensity coupled with a strong balance between helical structures. Contrastingly, the models with a large anastomosis angle experience the least amount of high shear, multidirectional shear, as well as spatial and temporal gradients of shear. Furthermore, the intensity of helical flow correlates strongly with curvature (r = 0.73, P < .001), whereas it is strongly and inversely associated with taper (r = -0.87, P < .001). In summary, a flow field dominated by a high helical intensity coupled with a strong balance between helical structures can suppress exposure to low/oscillating shear but is ineffective when it comes to other types of shear. This highlights the clinical potential of helical flow as a diagnostic marker of exposure to low/oscillating shear, as helical flow can be identified in vivo with the use of ultrasound imaging.

Assessing the Disturbed Flow and the Transition to Turbulence in the Arteriovenous Fistula

The arteriovenous fistula (AVF) is the main form of vascular access for hemodialysis patients, but its maintenance is very challenging. Its failure is mainly related to intimal hyperplasia (IH), leading to stenosis. The aim of this work was twofold: (i) to perform a computational study for the comparison of the disturbed blood dynamics in different configurations of AVF and (ii) to assess the amount of transition to turbulence developed by the specific geometric configuration of AVF. For this aim, we reconstructed realistic three-dimensional (3D) geometries of two patients with a side-to-end AVF, performing a parametric study by changing the angle of incidence at the anastomosis. We solved the incompressible Navier–Stokes equations modeling the blood as an incompressible and Newtonian fluid. Large eddy simulations (LES) were considered to capture the transition to turbulence developed at the anastomosis. The values of prescribed boundary conditions are obtained from clinical echo-color Doppler (ECD) measurements. To assess the disturbed flow, we considered hemodynamic quantities such as the velocity field, the pressure distribution, and wall shear stresses (WSS) derived quantities, whereas to quantify the transition to turbulence, we computed the standard deviation of the velocity field among different heartbeats and the turbulent kinetic energy.

The effect of endothelial nitric oxide synthase on the hemodynamics and wall mechanics in murine arteriovenous fistulas

Creation of a hemodialysis arteriovenous fistula (AVF) causes aberrant vascular mechanics at and near the AVF anastomosis. When inadequately regulated, these aberrant mechanical factors may impede AVF lumen expansion to cause AVF maturation failure, a significant clinical problem with no effective treatments. The endothelial nitric oxide synthase (NOS3) system is crucial for vascular health and function, but its effect on AVF maturation has not been fully characterized. We hypothesize that NOS3 promotes AVF maturation by regulating local vascular mechanics following AVF creation. Here we report the first MRI-based fluid-structure interaction (FSI) study in a murine AVF model using three mouse strains: NOS3 overexpression (NOS3 OE) and knockout (NOS3−/−) on C57BL/6 background, with C57BL/6 as the wild-type control (NOS3+/+). When compared to NOS3+/+ and NOS3−/−, AVFs in the OE mice had larger lumen area. AVFs in the OE mice also had smoother blood flow streamlines, as well as lower blood shear stress at the wall, blood vorticity, inner wall circumferential stretch, and radial wall thinning at the anastomosis. Our results demonstrate that overexpression of NOS3 resulted in distinct hemodynamic and wall mechanical profiles associated with favorable AVF remodeling. Enhancing NOS3 expression may be a potential therapeutic approach for promoting AVF maturation.

A novel hybrid silk-fibroin/polyurethane three-layered vascular graft: towards in situ tissue-engineered vascular accesses for haemodialysis

Clinically available alternatives of vascular access for long-term haemodialysis-currently limited to native arteriovenous fistulae and synthetic grafts-suffer from several drawbacks and are associated to high failure rates. Bioprosthetic grafts and tissue-engineered blood vessels are costly alternatives without clearly demonstrated increased performance. In situ tissue engineering could be the ideal approach to provide a vascular access that profits from the advantages of vascular grafts in the short-term (e.g. early cannulation) and of fistulae in the long-term (e.g. high success rates driven by biointegration). Hence, in this study a three-layered silk fibroin/polyurethane vascular graft was developed by electrospinning to be applied as long-term haemodialysis vascular access pursuing a 'hybrid' in situ engineering approach (i.e. based on a semi-degradable scaffold). This Silkothane^® graft was characterized concerning morphology, mechanics, physical properties, blood contact and vascular cell adhesion/viability. The full three-layered graft structure, influenced by the polyurethane presence, ensured mechanical properties that are a determinant factor for the success of a vascular access (e.g. vein-graft compliance matching). The Silkothane^® graft demonstrated early cannulation potential in line with self-sealing commercial synthetic arteriovenous grafts, and a degradability driven by enzymatic activity. Moreover, the fibroin-only layers and extracellular matrix-like morphology, presented by the graft, revealed to be crucial in providing a non-haemolytic character, long clotting time, and favourable adhesion of human umbilical vein endothelial cells with increasing viability after 3 and 7 d. Accordingly, the proposed approach may represent a step forward towards an in situ engineered hybrid vascular access with potentialities for vein-graft anastomosis stability, early cannulation, and biointegration.

Characterization and estimation of turbulence-related wall shear stress in patient-specific pulsatile blood flow

Disturbed, turbulent-like blood flow promotes chaotic wall shear stress (WSS) environments, impairing essential endothelial functions and increasing the susceptibility and progression of vascular diseases. These flow characteristics are today frequently detected at various anatomical, lesion and intervention-related sites, while their role as a pathological determinant is less understood. To present-day, numerous WSS-based descriptors have been proposed to characterize the spatiotemporal nature of the WSS disturbances, however, without differentiation between physiological laminar oscillations and turbulence-related WSS (tWSS) fluctuations. Also, much attention has been focused on magnetic resonance (MR) WSS estimations, so far with limited success; promoting the need of a near-wall surrogate marker. In this study, a new approach is explored to characterize the tWSS, by taking advantage of the tensor characteristics of the fluctuating WSS correlations, providing both a magnitude and an anisotropy measure of the disturbances. These parameters were studied in two patient-specific coarctation models (sever and mild), using large eddy simulations, and correlated against near-wall reciprocal Reynolds stress parameters. Collectively, results showed distinct regions of differing tWSS characteristics, features which were sensitive to changes in flow conditions. Generally, the post-stenotic tWSS was governed by near axisymmetric fluctuations, findings that where not consistent with conventional WSS disturbance predictors. At the 2-3 mm wall-offset range, a strong linear correlation was found between tWSS magnitude and near-wall turbulence kinetic energy (TKE), in contrast to the anisotropy indices, suggesting that MR-measured TKE can be used to assess elevated tWSS regions while tWSS anisotropy estimates request well-resolved simulation methods.

Toward longitudinal studies of hemodynamically induced vessel wall remodeling

INTRODUCTION:

Autogenous arteriovenous fistula is the preferred vascular access for hemodialysis, but it has high rates of non-maturation and early failure due to vascular stenosis. Convincing evidence supports a key role of local hemodynamics in vascular remodeling, suggesting that unsteady and disturbed flow conditions may be related to stenosis formation in arteriovenous fistula. The purpose of our study was to explore the feasibility of coupling contrast-free magnetic resonance imaging and computational fluid dynamics in longitudinal studies to identify the role of local hemodynamic changes over time in inducing vessel wall remodeling in arteriovenous fistula.

METHODS:

We acquired contrast-free magnetic resonance imaging of arm vasculature at 1 week and 6 weeks after arteriovenous fistula creation in a 72-year-old patient. We then generated three-dimensional models and evaluated lumen cross-sectional area of arteriovenous fistula limbs. We performed high-resolution computational fluid dynamics to evaluate changes in local hemodynamics over time.

RESULTS:

Our contrast-free magnetic resonance imaging protocol provided good quality images in a short scan duration. We observed a homogeneous dilatation in the proximal artery, while there was a more pronounced lumen dilatation in the venous outflow as compared to a limited dilatation in the juxta-anastomotic vein. Furthermore, we observed a slight stabilization of the flow pattern over time, suggesting that vascular outward remodeling accommodates the flow to a more helicoidally phenotype.

CONCLUSION:

Coupling contrast-free magnetic resonance imaging and high-resolution computational fluid dynamics represents a promising approach to shed more light in the mechanisms of vascular remodeling and can be used for prospective clinical investigations aimed at identifying critical hemodynamic factors contributing to arteriovenous fistula failure.

A Methodology for Non-Invasive 3-D Surveillance of Arteriovenous Fistulae Using Freehand Ultrasound

OBJECTIVE

Surveillance techniques for arteriovenous fistulae are required to maintain functional vascular access, with two-dimensional duplex ultrasound the most widely used imaging modality. This paper presents a surveillance method for an arteriovenous fistula using a freehand three-dimensional (3-D) ultrasound system. A patient-case study highlights the applicability in a clinical environment.

METHODS

The freehand ultrasound system uses optical tracking to determine the vascular probe location, and as the probe is swept down a patient's arm, each B-mode slice is spatially arranged to be post-processed as a volume. The volume is segmented to obtain the 3-D vasculature for high detail analysis.

RESULTS

The results follow a patient with stenosis, undergoing surgery to have a stent placement. A surveillance scan was taken pre-surgery, postsurgery, and at a two-month follow-up. Vasculature changes are quantified using detailed analysis, and the benefits of using 3-D imaging are shown through 3-D printing and visualization.

CONCLUSION AND SIGNIFICANCE

Non-invasive 3-D surveillance of arteriovenous fistulae is possible, and a patient-specific geometry was created using ultrasound and optical tracking. Access to this non-invasive 3-D surveillance technique will enable future studies to determine patient-specific remodeling behavior, in terms of geometry and hemodynamics over time.

High-Resolution Computational Fluid Dynamic Simulation of Haemodialysis Cannulation in a Patient-Specific Arteriovenous Fistula

Arteriovenous fistulae (AVF) are the preferred choice of vascular access in hemodialysis patients; however, complications such as stenosis can lead to access failure or recirculation, which reduces dialysis efficiency. This study utilized computational fluid dynamics on a patient-specific radiocephalic fistula under hemodialysis treatment to determine the dynamics of access recirculation and identify the presence of disturbed flow. Metrics of transverse wall shear stress (transWSS) and oscillatory shear index (OSI) were used to characterize the disturbed flow acting on the blood vessel wall, while a power spectral density (PSD) analysis was used to calculate the any turbulence within the access. Results showed that turbulence is generated at the anastomosis and continues through the swing segment. The arterial needle dampens the flow as blood is extracted to the dialyzer, while the venous needle reintroduces turbulence due to the presence of jet flows. Adverse shear stresses are present throughout the vascular access and coincide with these complex flow fields. The position of the needles had no effect in minimizing these forces. However, improved blood extraction may occur when the arterial needle is placed further from the anastomosis, minimizing the effects of residual turbulent structures generated at the anastomosis. Furthermore, the arterial and venous needle may be placed in close proximity to each other without increasing the risk of access recirculation, in a healthy mature fistula, due to the relatively stable blood flow in this region. This may negate the need for a long cannulation segment and aid clinicians in optimizing needle placement for hemodialysis.

The Effect of Arterial Curvature on Blood Flow in Arterio-Venous Fistulae: Realistic Geometries and Pulsatile Flow

Arterio-Venous Fistulae (AVF) are regarded as the "gold standard" method of vascular access for patients with End-Stage Renal Disease (ESRD) who require haemodialysis. However, up to 60% of AVF do not mature, and hence fail, as a result of Intimal Hyperplasia (IH). Unphysiological flow and oxygen transport patterns, associated with the unnatural and often complex geometries of AVF, are believed to be implicated in the development of IH. Previous studies have investigated the effect of arterial curvature on blood flow in AVF using idealized planar AVF configurations and non-pulsatile inflow conditions. The present study takes an important step forwards by extending this work to more realistic non-planar brachiocephalic AVF configurations with pulsatile inflow conditions. Results show that forming an AVF by connecting a vein onto the outer curvature of an arterial bend does not, necessarily, suppress unsteady flow in the artery. This finding is converse to results from a previous more idealized study. However, results also show that forming an AVF by connecting a vein onto the inner curvature of an arterial bend can suppress exposure to regions of low wall shear stress and hypoxia in the artery. This finding is in agreement with results from a previous more idealized study. Finally, results show that forming an AVF by connecting a vein onto the inner curvature of an arterial bend can significantly reduce exposure to high WSS in the vein. The results are important, as they demonstrate that in realistic scenarios arterial curvature can be leveraged to reduce exposure to excessively low/high levels of WSS and regions of hypoxia in AVF. This may in turn reduce rates of IH and hence AVF failure.

Towards the Identification of Hemodynamic Parameters Involved in Arteriovenous Fistula Maturation and Failure: A Review

Native arteriovenous fistulas have a high failure rate mainly due to the lack of maturation and uncontrolled neo-intimal hyperplasia development. Newly established hemodynamics is thought to be central in driving the fistula fate, after surgical creation. To investigate the effects of realistic wall shear stress stimuli on endothelial cells, an in vitro approach is necessary in order to reduce the complexity of the in vivo environment. After a systematic review, realistic WSS waveforms were selected and analysed in terms of magnitude, temporal gradient, presence of reversing phases (oscillatory shear index, OSI) and frequency content (hemodynamics index, HI). The effects induced by these waveforms in cellular cultures were also considered, together with the materials and methods used to cultivate and expose cells to WSS stimuli. The results show a wide heterogeneity of experimental approaches and WSS waveform features that prevent a complete understanding of the mechanisms that regulate mechanotransduction. Furthermore, the hemodynamics derived from the carotid bifurcation is the most investigated (in vitro), while the AVF scenario remains poorly addressed. In conclusion, standardisation of the materials and methods employed, as well as the decomposition of realistic WSS profiles, are required for a better understanding of the hemodynamic effects on AVF outcomes. This standardisation may also lead to a new classification of WSS features according to the risk associated with vascular dysfunction.

Blood Flow in Idealized Vascular Access for Hemodialysis: A Review of Computational Studies

Although our understanding of the failure mechanism of vascular access for hemodialysis has increased substantially, this knowledge has not translated into successful therapies. Despite advances in technology, it is recognized that vascular access is difficult to maintain, due to complications such as intimal hyperplasia. Computational studies have been used to estimate hemodynamic changes induced by vascular access creation. Due to the heterogeneity of patient-specific geometries, and difficulties with obtaining reliable models of access vessels, idealized models were often employed. In this review we analyze the knowledge gained with the use of computational such simplified models. A review of the literature was conducted, considering studies employing a computational fluid dynamics approach to gain insights into the flow field phenotype that develops in idealized models of vascular access. Several important discoveries have originated from idealized model studies, including the detrimental role of disturbed flow and turbulent flow, and the beneficial role of spiral flow in intimal hyperplasia. The general flow phenotype was consistent among studies, but findings were not treated homogeneously since they paralleled achievements in cardiovascular biomechanics which spanned over the last two decades. Computational studies in idealized models are important for studying local blood flow features and evaluating new concepts that may improve the patency of vascular access for hemodialysis. For future studies we strongly recommend numerical modelling targeted at accurately characterizing turbulent flows and multidirectional wall shear disturbances.

Ultrasound Vector Flow Imaging – could be a new tool in evaluation of arteriovenous fistulas for hemodialysis?

Introduction

We report the use of a new ultrasound technique to evaluate the axial and lateral components of a complex flow in the arteriovenous fistula (AVF). Vector Flow Imaging (VFI) allows to identify different components of the flow in every direction, even orthogonal to the flow streamline, represented by many single vectors. VFI could help to identify flow alterations in AVF, probably responsible for its malfunction.

Methods

From February to June 2016, 14 consecutive patients with upper-limb AVF were examined with a Resona 7 (Mindray, Shenzhen, China) ultrasound scanner equipped with VFI. An analysis of mean velocity, angular direction and mean number of vectors impacting the vessel wall was carried out. We also identified main flow patterns present in the arterial side, into the venous aneurysm and in correspondence of significant stenosis.

Results

A disturbed flow with the presence of vectors directed against the vessel walls was found in 9/14 patients (64.28%): in correspondence of the iuxta-anastomotic venous side (4/9; 44.4%), into the venous aneurysmal tracts (3/9; 33.3%) and in concomitance of stenosis (2/9; 22.2%). The mean velocity of the vectors was around 20-25 cm/s, except in presence of stenosis, where the velocities were much higher (45-50 cm/s). The vectors directed against the vessel walls presented high angle attack (from 45° to 90°, with a median angular deviation 65°).

Conclusions

VFI was confirmed to be an innovative and intuitive imaging technology to study the flow complexity in the arteriovenous fistulas.

High resolution hemodynamic profiling of murine arteriovenous fistula using magnetic resonance imaging and computational fluid dynamics

Background

Arteriovenous fistula (AVF) maturation failure remains a major cause of morbidity and mortality in hemodialysis patients. The two major etiologies of AVF maturation failure are early neointimal hyperplasia development and persistent inadequate outward remodeling. Although hemodynamic changes following AVF creation may impact AVF remodeling and contribute to neointimal hyperplasia development and impaired outward remodeling, detailed AVF hemodynamics are not yet fully known. Since murine AVF models are valuable tools for investigating the pathophysiology of AVF maturation failure, there is a need for a new approach that allows the hemodynamic characterization of murine AVF at high resolutions.

Methods

This methods paper presents a magnetic resonance imaging (MRI)-based computational fluid dynamic (CFD) method that we developed to rigorously quantify the evolving hemodynamic environment in murine AVF. The lumen geometry of the entire murine AVF was reconstructed from high resolution, non-contrast 2D T2-weighted fast spin echo MRI sequence, and the flow rates of the AVF inflow and outflow were extracted from a gradient echo velocity mapping sequence. Using these MRI-obtained lumen geometry and inflow information, CFD modeling was performed and used to calculate blood flow velocity and hemodynamic factors at high resolutions (on the order of 0.5 μm spatially and 0.1 ms temporally) throughout the entire AVF lumen. We investigated both the wall properties (including wall shear stress (WSS), wall shear stress spatial gradient, and oscillatory shear index (OSI)) and the volumetric properties (including vorticity, helicity, and Q-criterion).

Results

Our results demonstrate increases in AVF flow velocity, WSS, spatial WSS gradient, and OSI within 3 weeks post-AVF creation when compared to pre-surgery. We also observed post-operative increases in flow disturbances and vortices, as indicated by increased vorticity, helicity, and Q-criterion.

Conclusions

This novel protocol will enable us to undertake future mechanistic studies to delineate the relationship between hemodynamics and AVF development and characterize biological mechanisms that regulate local hemodynamic factors in transgenic murine AVF models.

Electronic supplementary material

The online version of this article (doi:10.1186/s12976-017-0053-x) contains supplementary material, which is available to authorized users.

Clinical use of computational modeling for surgical planning of arteriovenous fistula for hemodialysis

BACKGROUND

Autogenous arteriovenous fistula (AVF) is the best vascular access (VA) for hemodialysis, but its creation is still a critical procedure. Physical examination, vascular mapping and doppler ultrasound (DUS) evaluation are recommended for AVF planning, but they can not provide direct indication on AVF outcome. We recently developed and validated in a clinical trial a patient-specific computational model to predict pre-operatively the blood flow volume (BFV) in AVF for different surgical configuration on the basis of demographic, clinical and DUS data. In the present investigation we tested power of prediction and usability of the computational model in routine clinical setting.

METHODS

We developed a web-based system (AVF.SIM) that integrates the computational model in a single procedure, including data collection and transfer, simulation management and data storage. A usability test on observational data was designed to compare predicted vs. measured BFV and evaluate the acceptance of the system in the clinical setting. Six Italian nephrology units were involved in the evaluation for a 6-month period that included all incident dialysis patients with indication for AVF surgery.

RESULTS

Out of the 74 patients, complete data from 60 patients were included in the final dataset. Predicted brachial BFV at 40 days after surgery showed a good correlation with measured values (in average 787 ± 306 vs. 751 ± 267 mL/min, R = 0.81, p < 0.001). For distal AVFs the mean difference (±SD) between predicted vs. measured BFV was -2.0 ± 20.9%, with 50% of predicted values in the range of 86-121% of measured BFV. Feedbacks provided by clinicians indicate that AVF.SIM is easy to use and well accepted in clinical routine, with limited additional workload.

CONCLUSIONS

Clinical use of computational modeling for AVF surgical planning can help the surgeon to select the best surgical strategy, reducing AVF early failures and complications. This approach allows individualization of VA care, with the aim to reduce the costs associated with VA dysfunction, and to improve AVF clinical outcome.

Is shear stress the key factor for AVF maturation?

Autologous arteriovenous fistula (AVF) is the preferred choice for providing vascular access to hemodialysis (HD) patients, but it is still affected by high incidence of non-maturation or early failure. After creation, AVF must undergo vascular remodeling, a process characterized by an increase in blood vessel diameter and wall thickness, to allow efficient and adequate HD. A growing body of evidence indicates that AVF maturation is related to the response of endothelial cells (ECs) to changes in wall shear stress (WSS), and in particular, to changes of its peak value. The reasons why important number of AVFs are affected by non-maturation or early failure still remain to be elucidated, but it has been suggested that local hemodynamic conditions with highly disturbed flow patterns may play an important role. In the present contribution, we addressed the role of WSS on AVF maturation, clarifying mechanisms that affect the clinical outcome of AVF creation. We also pointed out the need of non-invasive longitudinal studies, with repeated observations of hemodynamic parameters and structural changes during time, to obtain evidence of a cause-and-effect relationship between the presence of disturbed flow and AVF maturation failure. This understanding may be fundamental in the future to ameliorate clinical outcome of AVF creation, with a great impact on the clinical management of HD patients and their quality of life.