Tumor Ablation Enhancement by Combining Radiofrequency Ablation and Irreversible Electroporation: An In Vitro 3D Tumor Study

Locoregional Thermal and Chemical Tumor Ablation: Review of Clinical Applications and Potential Opportunities for Use in Low- and Middle-Income Countries

This review highlights opportunities to develop accessible ablative therapies to reduce the cancer burden in LMICs.

Quantitative analysis of contribution of mild and moderate hyperthermia to thermal ablation and sensitization of irreversible electroporation of pancreatic cancer cells

INTRODUCTION

Irreversible electroporation (IRE) is an ablation modality that applies short, high-voltage electric pulses to unresectable cancers. Although considered a non-thermal technique, temperatures do increase during IRE. This temperature rise sensitizes tumor cells for electroporation as well as inducing partial direct thermal ablation.

AIM

To evaluate the extent to which mild and moderate hyperthermia enhance electroporation effects, and to establish and validate in a pilot study cell viability models (CVM) as function of both electroporation parameters and temperature in a relevant pancreatic cancer cell line.

METHODS

Several IRE-protocols were applied at different well-controlled temperature levels (37 °C ≤ T ≤ 46 °C) to evaluate temperature dependent cell viability at enhanced temperatures in comparison to cell viability at T = 37 °C. A realistic sigmoid CVM function was used based on thermal damage probability with Arrhenius Equation and cumulative equivalent minutes at 43 °C (CEM43°C) as arguments, and fitted to the experimental data using "Non-linear-least-squares"-analysis.

RESULTS

Mild (40 °C) and moderate (46 °C) hyperthermic temperatures boosted cell ablation with up to 30% and 95%, respectively, mainly around the IRE threshold E_th,50% electric-field strength that results in 50% cell viability. The CVM was successfully fitted to the experimental data.

CONCLUSION

Both mild- and moderate hyperthermia significantly boost the electroporation effect at electric-field strengths neighboring E_th,50%. Inclusion of temperature in the newly developed CVM correctly predicted both temperature-dependent cell viability and thermal ablation for pancreatic cancer cells exposed to a relevant range of electric-field strengths/pulse parameters and mild moderate hyperthermic temperatures.

Preparation and Use of Decellularized Extracellular Matrix for Tissue Engineering

The multidisciplinary fields of tissue engineering and regenerative medicine have the potential to revolutionize the practise of medicine through the abilities to repair, regenerate, or replace tissues and organs with functional engineered constructs. To this end, tissue engineering combines scaffolding materials with cells and biologically active molecules into constructs with the appropriate structures and properties for tissue/organ regeneration, where scaffolding materials and biomolecules are the keys to mimic the native extracellular matrix (ECM). For this, one emerging way is to decellularize the native ECM into the materials suitable for, directly or in combination with other materials, creating functional constructs. Over the past decade, decellularized ECM (or dECM) has greatly facilitated the advance of tissue engineering and regenerative medicine, while being challenged in many ways. This article reviews the recent development of dECM for tissue engineering and regenerative medicine, with a focus on the preparation of dECM along with its influence on cell culture, the modification of dECM for use as a scaffolding material, and the novel techniques and emerging trends in processing dECM into functional constructs. We highlight the success of dECM and constructs in the in vitro, in vivo, and clinical applications and further identify the key issues and challenges involved, along with a discussion of future research directions.

Lethal Electric Field Thresholds for Cerebral Cells With Irreversible Electroporation and H-FIRE Protocols: An In Vitro Three-Dimensional Cell Model Study

The lethal electric field (LEF) thresholds for three typical cerebral cells, including a malignant glioblastoma (GBM) cell line and two cell lines from the healthy blood-brain barrier (BBB), treated by irreversible electroporation (IRE) or high-frequency irreversible electroporation (H-FIRE) protocols were investigated in an in vitro three-dimensional (3D) cell model. A conventional IRE protocol (90 pulses, 1 Hz, and 100-μs pulse duration) and three novel H-FIRE protocols (1-3-1, 0.5-1-0.5, and 1-1-1) were used to treat the cerebral cells in both 3D single-cell and two-cell models. The electrical conductivity of the 3D cell model under different electric field strengths were characterized with the method of electrochemical impedance spectroscopy (EIS). Based on EIS, a numerical electrothermal model of electroporation was built for the determination of the LEF threshold with different protocols and temperature monitoring. Cell viability was assessed by fluorescence staining 6 h after the treatment. The results showed no thermal lethal effect on cells when these protocols were used. The LEF threshold for GBM cells was significantly lower than that of the healthy BBB cells. These results suggest the possibility of selective ablation of human cerebral GBM by IRE and H-FIRE treatments with no injury or reversible injury to healthy cells, and the potential use of IRE or H-FIRE for transient disruption of the BBB to allow chemotherapy to reach the tumor.

Synergetic Thermal Therapy for Cancer: State-of-the-Art and the Future

As a safe and minimal-invasive modality, thermal therapy has become an effective treatment in cancer treatment. Other than killing the tumor cells or destroying the tumor entirely, the thermal modality results in profound molecular, cellular and biological effects on both the targeted tissue, surrounding environments, and even the whole body, which has triggered the combination of the thermal therapy with other traditional therapies as chemotherapy and radiation therapy or new therapies like immunotherapy, gene therapy, etc. The combined treatments have shown encouraging therapeutic effects both in research and clinic. In this review, we have summarized the outcomes of the existing synergistic therapies, the underlying mechanisms that lead to these improvements, and the latest research in the past five years. Limitations and future directions of synergistic thermal therapy are also discussed.

A Brief Insight on Magnetic Resonance Conditional Neurosurgery Robots

The brain is a delicate organ in the human body that requires extreme care. Brain-related diseases are unavoidable. Perse, neurosurgery is a complicated procedure that demands high precision and accuracy. Developing a surgical robot is a complex task. To date, there are only a handful of neurosurgery robots in the market that distinctly undergo clinical procedures. These robots have exorbitant cost that hinders the utmost care progress in the area as they are unaffordable. This paper looked at the historical perspective and presented insight literature of the magnetic resonance conditional stereotactic neurosurgery robots that find their ways in clinics, abandoning research projects and promising research yet to undergo clinical use. In addition, the study also gives a thorough insight into the advantage of magnetic resonance imaging modalities and magnetic resonance conditional robots and the future challenges in automation use. Image compatibility test data and accuracy results are also examined because they guarantee that these systems work correctly in particular imaging settings. The primary differences between these systems include actuation and control technologies, construction materials, and the degree of freedom. Thus, one system has an advantage over the other.

Electroporation-Based Therapy for Brain Tumors: A Review

Electroporation-based therapy (EBT), as a high-voltage-pulse technology has been prevalent with favorable clinical outcomes in the treatment of various solid tumors. This review paper aims to promote the clinical translation of EBT for brain tumors. First, we briefly introduced the mechanism of pore formation in a cell membrane activated by external electric fields using a single cell model. Then, we summarized and discussed the current in vitro and in vivo preclinical studies, in terms of (1) the safety and effectiveness of EBT for brain tumors in animal models, and (2) the blood-brain barrier (BBB) disruption induced by EBT. Two therapeutic effects could be achieved in EBT for brain tumors simultaneously, i.e., the tumor ablation induced by irreversible electroporation (IRE) and transient BBB disruption induced by reversible electroporation (RE). The BBB disruption could potentially improve the uptake of antitumor drugs thereby enhancing brain tumor treatment. The challenges that hinder the application of EBT in the treatment of human brain tumors are discussed in the review paper as well.

Dynamic Electroporation Model Evaluation on Rabbit Tissues

Biological electroporation is a process of opening pores in the cell membrane when exposed to intense electric fields. This work provides results for validation of a dynamic model of electroporation on biological tissues. Computational simulations were carried out and results for the electrical current through the tissue and increase of the tissue temperature were compared to experimental results. Two calculation methods were used: Equivalent Circuit Method and Finite Element Method. With Equivalent Circuit Method the dielectric dispersion present in biological tissues was included. Liver, kidney and heart of rabbit were used in the experiments. Voltage pulse protocols and voltage ramps were applied using stainless steel needles electrodes. There is good agreement between the simulated and experimental results with mean errors below 15%, with the simulated results within the experimental standard deviation. Only for the protocol with fundamental frequency of 50 kHz, the simulation performed by the Finite Element Method using a commercial software did not correctly represent the current, with errors reaching 50%. The justification for the error found is due to the dielectric dispersion that was not included in this simulator.

The impact of impaired DNA mobility on gene electrotransfer efficiency: analysis in 3D model

Background

Gene electrotransfer is an established method that enables transfer of DNA into cells with electric pulses. Several studies analyzed and optimized different parameters of gene electrotransfer, however, one of main obstacles toward efficient electrotransfection in vivo is relatively poor DNA mobility in tissues. Our aim was to analyze the effect of impaired mobility on gene electrotransfer efficiency experimentally and theoretically. We applied electric pulses with different durations on plated cells, cells grown on collagen layer and cells embedded in collagen gel (3D model) and analyzed gene electrotransfer efficiency. In order to analyze the effect of impaired mobility on gene electrotransfer efficiency, we applied electric pulses with different durations on plated cells, cells grown on collagen layer and cells embedded in collagen gel (3D model) and analyzed gene electrotransfer efficiency.

Results

We obtained the highest transfection in plated cells, while transfection efficiency of embedded cells in 3D model was lowest, similarly as in in vivo. To further analyze DNA diffusion in 3D model, we applied DNA on top or injected it into 3D model and showed, that for the former gene electrotransfer efficiency was similarly as in in vivo. The experimental results are explained with theoretical analysis of DNA diffusion and electromobility.

Conclusion

We show, empirically and theoretically that DNA has impaired electromobility and especially diffusion in collagen environment, where the latter crucially limits electrotransfection. Our model enables optimization of gene electrotransfer in in vitro conditions.

Irreversible electroporation versus radiofrequency ablation for hepatocellular carcinoma: a single centre propensity-matched comparison

BACKGROUND AND AIMS

Irreversible electroporation (IRE) is a relatively new non-thermal ablative method for unresectable hepatocellular carcinoma (HCC). We aimed to compare the longer-term efficacy of IRE to the standard thermal technique of radiofrequency ablation (RFA) in HCC.

METHODS

All patients who underwent IRE or RFA for HCC in our centre were identified and demographic and clinical data were analysed up until 1st March, 2020. Local recurrence-free survival (LRFS) was compared between groups after propensity score matching for age, gender, Child-Pugh grade, BCLC stage, lesion size and alpha-fetoprotein (AFP) level.

RESULTS

A total of 190 HCC ablations (31 IRE and 159 RFA) were identified. After propensity score matching, we compared 25 IRE procedures (76% males, median age 62.4 years, median tumour size 20 mm) to 96 RFA procedures (84.4% males, median age 64.3 years, median tumour size 18.5 mm). LRFS did not differ between groups, with a 1-, 2- and 5-year LRFS of 80.4% (95% CI 55.8-92.2), 69.1% (95% CI 43.3-84.9) and 44.9% (95% CI 18.9-68.1%), respectively for IRE and 84.8% (95% CI 75.2-90.9), 71.3% (95% CI 58.3-81.0) and 52.1% (95% CI 35.4-66.4%), respectively for RFA (p = .63). There were no major procedure-related complications or deaths in either group.

CONCLUSIONS

Whilst IRE remains a relatively novel therapy for HCC cases where standard thermal ablation is contraindicated, the LRFS in our centre is comparable to that of RFA. IRE should therefore be considered as a treatment option in such cases when available before stage-migration to non-curative therapies such as transarterial chemoembolization (TACE).

An in vivo study of a custom-made high-frequency irreversible electroporation generator on different tissues for clinically relevant ablation zones

PURPOSE

To examine the ablation zone, muscle contractions, and temperature increases in both rabbit liver and kidney models in vivo for a custom-made high-frequency irreversible electroporation (H-FIRE) generator.

MATERIALS AND METHODS

A total of 18 New Zealand white rabbits were used to investigate five H-FIRE protocols (n = 3 for each protocol) and an IRE protocol (n = 3) for the performance of the designed H-FIRE device in both liver and kidney tissues. The ablation zone was determined by using histological analysis 72 h after treatment. The extent of muscle contractions and temperature change during the application of pulse energy were measured by a commercial accelerometer attached to animals and fiber optic temperature probe inserted into organs with IRE electrodes, respectively.

RESULTS

All H-FIRE protocols were able to generate visible ablation zones without muscle contractions, for both liver and kidney tissues. The area of ablation zone generated in H-FIRE pulse protocols (e.g., 0.3-1 μs, 2000 V, and 90-195 bursts) appears similar to that of IRE protocol (100 μs, 1000 V, and 90 pulses) in both liver and kidney tissues. No significant temperature increase was noticed except for the protocol with the highest pulse energy (e.g., 1 μs, 2000 V, and 180 bursts).

CONCLUSION

Our work serves to complement the current H-FIRE pulse waveforms, which can be optimized to significantly improve the quality of ablation zone in terms of precision for liver and kidney tumors in clinical setting.

Irreversible Electroporation Enhanced by Radiofrequency Ablation: An In Vitro and Computational Study in a 3D Liver Tumor Model

In the present study, we used a computational and experimental study in a 3D liver tumor model (LTM) to explore the tumor ablation enhancement of irreversible electroporation (IRE) by pre-heating with radiofrequency ablation (RFA) and elucidate the mechanism whereby this enhancement occurs. Three ablation protocols, including IRE alone, RFA45 → IRE (with the pre-heating temperature of 45 °C), and RFA60 → IRE (with the pre-heating temperature of 60 °C) were investigated. Both the thermal conductivity and electrical conductivity of the 3D LTM were characterized with the change in the pre-heating temperature. The results showed, compared to IRE alone, a significant increase in the tumor ablation volume (19.59 [Formula: see text] 0.61 vs. 15.29 ± 0.61 mm³, p = 0.002 and 22.87 [Formula: see text] 0.35 vs. 15.29 ± 0.61 mm³, p < 0.001) was observed with both RFA45 → IRE and RFA60 → IRE, leading to a decrease in lethal electric filed strength (8 and 17%, correspondingly). The mechanism can be attributed to the change of cell microenvironment by pre-heating and/or a synergistic effect of RFA and IRE. The proposed enhancing method might contribute to the improvement of interventional oncology in the treatment of large tumors close to critical organs (e.g., large blood vessels and bile ducts).

Treatment Planning Optimization in Irreversible Electroporation for Complete Ablation of Variously Sized Cervical Tumors: A Numerical Study

Irreversible electroporation (IRE), a relatively new energy-based tumor ablation technology, has shown itself in the last decade to be able to safely ablate tumors with favorable clinical outcomes, yet little work has been done on optimizing the IRE protocol to variously sized tumors. Incomplete tumor ablation has been shown to be the main reason leading to the local recurrence and thus treatment failure. The goal of this study was to develop a general optimization approach to optimize the IRE protocol for cervical tumors in different sizes, while minimizing the damage to normal tissues. This kind of approach can lay a foundation for future personalized treatment of IRE. First, a statistical IRE cervical tumor death model was built using previous data in our group. Then, a multi-objective optimization problem model was built, in which the decision variables are five IRE-setting parameters, namely, the pulse strength (U), the length of active tip (H), the number of pulses delivered in one round between a pair of electrodes (A), the distance between electrodes (D), and the number of electrodes (N). The domains of the decision variables were determined based on the clinical experience. Finally, the problem model was solved by using nondominated sorting genetic algorithms II (NSGA-II) algorithm to give respective optimal protocol for three sizes of cervical tumors. Every protocol was assessed by the evaluation criterion established in the study to show the efficacy in a more straightforward way. The results of the study demonstrate this approach can theoretically provide the optimal IRE protocol for different sizes of tumors and may be generalizable to other types, sizes, and locations of tumors.

HyCHEED System for Maintaining Stable Temperature Control during Preclinical Irreversible Electroporation Experiments at Clinically Relevant Temperature and Pulse Settings

Electric permeabilization of cell membranes is the main mechanism of irreversible electroporation (IRE), an ablation technique for treatment of unresectable cancers, but the pulses also induce a significant temperature increase in the treated volume. To investigate the therapeutically thermal contribution, a preclinical setup is required to apply IRE at desired temperatures while maintaining stable temperatures. This study’s aim was to develop and test an electroporation device capable of maintaining a pre-specified stable and spatially homogeneous temperatures and electric field in a tumor cell suspension for several clinical-IRE-settings. A hydraulically controllable heat exchange electroporation device (HyCHEED) was developed and validated at 37 °C and 46 °C. Through plate electrodes, HyCHEED achieved both a homogeneous electric field and homogenous-stable temperatures; IRE heat was removed through hydraulic cooling. IRE was applied to 300 μL of pancreatic carcinoma cell suspension (Mia PaCa-2), after which cell viability and specific conductivity were determined. HyCHEED maintained stable temperatures within ±1.5 °C with respect to the target temperature for multiple IRE-settings at the selected temperature levels. An increase of cell death and specific conductivity, including post-treatment, was found to depend on electric-field strength and temperature. HyCHEED is capable of maintaining stable temperatures during IRE-experiments. This provides an excellent basis to assess the contribution of thermal effects to IRE and other bio-electromagnetic techniques.

A Novel Method to Increase Tumor Ablation Zones With RFA by Injecting the Cationic Polymer Solution to Tissues: In Vivo and Computational Studies

OBJECTIVE

This study aims to examine, for the first time, the introduction of cationic polymer solutions to improve radiofrequency ablation (RFA) in terms of a potentially enlarged ablation zone.

METHODS

By using in vivo and computational RFA studies, two cationic polymers, Chitooligosaccharides (COS) and carboxymethyl chitosan (CMC), diluted in deionized water, were injected into tissues separately surrounding the RF bipolar electrode prior to power application. A total of 9 rabbits were used to 1) measure the increase in electrical conductivity of tissues injected with the cationic polymer solutions, and 2) explore the enhancement of the ablation performance in RFA trials. A computer model of RFA comprising a model of the solution diffusion with an RF thermal ablation model was also built, validated by the in vivo experiment, to quantitatively study the effect of cationic polymer solutions on ablation performances.

RESULTS

Compared to the control group, the electrical conductivity of rabbit liver tissues was increased by 42.20% (0.282 ± 0.006 vs. 0.401 ± 0.048 S/m, P = 0.001) and 43.97% (0.282 ± 0.006 vs. 0.406 ± 0.042 S/m, P = 0.001) by injecting the COS and CMC solution at the concentration of 100 mg/mL into the tissues, denoted COS_DW100 and CMC_DW100, respectively. Consequently, the in vivo experiments show that the ablation zone was enlarged by 95% (47.6 ± 6.3 vs. 92.6 ± 11.5 mm², P < 0.001) and 87% (47.6± 6.3 vs. 88.8 ± 9.6 mm², P < 0.001) by COS_DW100 and CMC_DW100, respectively. The computer simulation shows that the ablation zone was enlarged by 71% (51.9 vs. 88.7 mm²) and 63% (51.9 vs. 84.7 mm²) by COS_DW100 and CMC_DW100, respectively.

CONCLUSION

The injection of the cationic solution can greatly improve the performance of RFA treatment in terms of enlarging the ablation zone, which is due to the increase in the electrical conductivity of liver tissues surrounding the RF electrode.

SIGNIFICANCE

This study contributes to the improvement of RFA in the treatment of large tumors.