3D Finite Element Modeling of Blast Wave Transmission from the External Ear to Cochlea

Pathogenic mechanism analysis of cochlear key structural lesion and phonosensitive hearing loss

Due to ethical issues and the very fine and complex structure of the cochlea, it is difficult to directly perform experimental measurement on the human cochlea. Therefore, the finite element method has become an effective and replaceable new research means. Accurate numerical analysis on human ear using finite element method can provide better understanding of sound transmission and can be used to assess the influence of diseases on hearing and to treat hearing loss. In this research, a three-dimensional (3D) finite element model (FEM) of the human ear of cochlea was presented to investigate the destruction of basilar membrane (BM), round window (RW) sclerosis and perilymph fistula, the key structures of the cochlea, and analyze the effects of these abnormal pathological states in the cochlea on cochlear hearing, resulting in the changes in cochlear sense structure biomechanical behavior and quantitative prediction of the degree and harm of the disorder to the decline of human hearing. Therefore, this paper can deepen reader's understanding of the cochlear biomechanical mechanism and provide a theoretical foundation for clinical otology.

Study on damage of the macrostructure of the cochlea under the impact load

Due to the tiny and delicate structure of the cochlea, the auditory system is the most sensitive to explosion impact damage. After being damaged by the explosion impact wave, it usually causes long-term deafness, tinnitus, and other symptoms. To better understand the influence of impact load on the cochlea and basilar membrane (BM), a three-dimensional (3D) fluid-solid coupling finite element model was developed. This model accurately reflects the actual spatial spiral shape of the human cochlea, as well as the lymph environment and biological materials. Based on verifying the reliability of the model, the curve of impact load-amplitude response was obtained, and damage of impact load on the cochlea and the key macrostructure-BM was analyzed. The results indicate that impact wave at middle frequency has widest influence on the cochlea. Furthermore, impact loading causes tears in the BM and destroys the cochlear frequency selectivity.

Study of fatigue damage to the cochlea

In order to explore the hearing loss resulting from exposure to continuous or intermittent loud noise. A three-dimensional liquid-solid coupling finite element model of spiral cochlea was established. The reliability of the model was verified, and the stress and amplitude of the basilar membrane of the pivotal structure in cochlea were analyzed. The results show that under the action of the same high-pressure sound, the preferential fatigue area of the cochlear high-frequency area mainly causes fatigue in the cochlear. The safer area is a sound pressure level below 70 dB, while one above 90 dB accelerates damage to the ear.

3D Finite Element Model of Human Ear with 3-Chamber Spiral Cochlea for Blast Wave Transmission from the Ear Canal to Cochlea

Blast-induced auditory trauma is a common injury in military service members and veterans that leads to hearing loss. While the inner ear response to blast exposure is difficult to characterize experimentally, computational models have advanced to predict blast wave transmission from the ear canal to the cochlea; however, published models have either straight or spiral cochlea with fluid-filled two chambers. In this paper, we report the recently developed 3D finite element (FE) model of the human ear mimicking the anatomical structure of the 3-chambered cochlea. The model consists of the ear canal, middle ear, and two and a half turns of the cochlea with three chambers separated by the Reissner's membrane (RM) and the basilar membrane (BM). The blast overpressure measured from human temporal bone experiments was applied at the ear canal entrance and the Fluent/Mechanical coupled fluid-structure interaction analysis was conducted in ANSYS software. The FE model-derived results include the pressure in the canal near the tympanic membrane (TM) and the intracochlear pressure at scala vestibuli, the TM displacement, and the stapes footplate (SFP) displacement, which were compared with experimentally measured data in human temporal bones. The validated model was used to predict the biomechanical response of the ear to blast overpressure: distributions of the maximum strain and stress within the TM, the BM displacement variation from the base to apex, and the energy flux or total energy entering the cochlea. The comparison of intracochlear pressure and BM displacement with those from the FE model of 2-chambered cochlea indicated that the 3-chamber cochlea model with the RM and scala media chamber improved our understanding of cochlea mechanics. This most comprehensive FE model of the human ear has shown its capability to predict the middle ear and cochlea responses to blast overpressure which will advance our understanding of auditory blast injury.

A comprehensive finite-element human ear model to estimate noise-induced hearing loss associated with occupational noise exposure

BACKGROUND AND OBJECTIVE

Noise is a common occupational and environmental hazard; however, little is known about the use of computational tools to quantitively analyze data on basilar membrane (BM) damage in noise-induced hearing loss (NIHL). Here, we established a comprehensive three-dimensional finite-element human ear model to quantify the impact of noise exposure on BM and perilymph fluid.

METHODS

We used auditory risk units (ARUs) to evaluate the BM damage for subjects (3 men and 5 women; mean age, 32.75 ± 8.86 years; age range, 24-44 years). A 90-dB sound pressure level (SPL) was normally applied at the external auditory canal (EAC) entrance to simulate sound transmission from the EAC to the cochlea at frequencies of 0.2-10.0 kHz.

RESULTS

The pressure distribution of perilymph fluid is totally different on frequency responses under low and high sound-evoked (0.013-10.0 kHz). The highest ARUs were 18.479% at the distance of 1 mm from the base, and the second-highest to fourth-highest ARUs occurred at distances of 5-7 mm from the base, where their ARUs were 9.749%, 9.176%, and 11.231%. The total of the ARUs reached 81.956% at external frequencies' sounds of 3.2-5.0 kHz. Among these, the 3.8-kHz and 3.6-kHz frequencies yielded the highest and second-highest ARUs of 20.325% and 19.873%, respectively.

CONCLUSIONS

This study would inform our understanding of NIHL associated with occupational noise exposure. We present a FE modelling and describe how it might provide a unique way to unravel mechanisms that drive NIHL due to loud noises.

Three-Dimensional Finite Element Modeling of Blast Wave Transmission From the External Ear to a Spiral Cochlea

Blast-induced injuries affect the health of veterans, in which the auditory system is often damaged, and blast-induced auditory damage to the cochlea is difficult to quantify. A recent study modeled blast overpressure (BOP) transmission throughout the ear utilizing a straight, two-chambered cochlea, but the spiral cochlea's response to blast exposure has yet to be investigated. In this study, we utilized a human ear finite element (FE) model with a spiraled, two-chambered cochlea to simulate the response of the anatomical structural cochlea to BOP exposure. The FE model included an ear canal, middle ear, and two and half turns of two-chambered cochlea and simulated a BOP from the ear canal entrance to the spiral cochlea in a transient analysis utilizing fluid-structure interfaces. The model's middle ear was validated with experimental pressure measurements from the outer and middle ear of human temporal bones. The results showed high stapes footplate (SFP) displacements up to 28.5 μm resulting in high intracochlear pressures and basilar membrane (BM) displacements up to 43.2 μm from a BOP input of 30.7 kPa. The cochlea's spiral shape caused asymmetric pressure distributions as high as 4 kPa across the cochlea's width and higher BM transverse motion than that observed in a similar straight cochlea model. The developed spiral cochlea model provides an advancement from the straight cochlea model to increase the understanding of cochlear mechanics during blast and progresses toward a model able to predict potential hearing loss after blast.

Efficacy of Body Armor in Protection Against Blast Injuries Using a Swine Model in a Confined Space with a Blast Tube

The purpose of this study was to clarify whether or not body armor would protect the body of a swine model using a blast tube built at National Defense Medical College, which is the first such blast tube in Japan. Seventeen pigs were divided into two groups: the body armor group and the non-body armor group. Under intravenous anesthesia, the pigs were tightly fixed in the left lateral position on a table and exposed from the back neck to the upper lumbar back to the blast wave and wind with or without body armor, with the driving pressure of the blast tube set to 3.0 MPa. When the surviving and dead pigs were compared, blood gas analyses revealed significant differences in PaO2, PaCO2, and pH in the super-early phase. All pigs injured by the blast wave and wind had lung hemorrhage. All 6 animals in the body armor group and 6 of the 11 animals in the control group survived for 3 hours after injury. Respiratory arrest immediately after exposure to the blast wave was considered to influence the mortality in our pig model. Body armor may have a beneficial effect in protecting against respiratory arrest immediately after an explosion.