Effect of Angiogenesis in Bone Tissue Engineering

Mitochondria Transplantation to Bone Marrow Stromal Cells Promotes Angiogenesis During Bone Repair

Angiogenesis is crucial for successful bone defect repair. Co-transplanting Bone Marrow Stromal Cells (BMSCs) and Endothelial Cells (ECs) has shown promise for vascular augmentation, but it face challenges in hostile tissue microenvironments, including poor cell survival and limited efficacy. In this study, the mitochondria of human BMSCs are isolated and transplanted to BMSCs from the same batch and passage number (BMSCsmito). The transplanted mitochondria significantly boosted the ability of BMSCsmito-ECs to promote angiogenesis, as assessed by in vitro tube formation and spheroid sprouting assays, as well as in vivo transplantation experiments in balb/c mouse and SD rat models. The Dll4-Notch1 signaling pathway is found to play a key role in BMSCsmito-induced endothelial tube formation. Co-transplanting BMSCsmito with ECs in a rat cranial bone defect significantly improves functional vascular network formation, and improve bone repair outcomes. These findings thus highlight that mitochondrial transplantation, by acting through the DLL4-Notch1 signaling pathway, represents a promising therapeutic strategy for enhancing angiogenesis and improving bone repair. Hence, mitochondrial transplantation to BMSCS as a therapeutic approach for promoting angiogenesis offers valuable insights and holds much promise for innovative regenerative medicine therapies.

Promoting a Cobalt Complex of Qingzhuan Dark Tea Polysaccharides on Fracture Healing in Rats

Fractures occur commonly with multiple injuries, and their incidence has increased in recent years. Trace amounts of cobalt are necessary for many living organisms as it stimulates hematopoiesis and improves bone health. However, cobalt is also toxic, as it might cause allergic reactions and tissue destruction. These factors limit the application of cobalt in some medical fields. We studied the tea polysaccode-cobalt complex (TPS-Co) prepared from Qingzhuan Dark Tea polysaccharides. We used 6-week-old Sprague-Dawley rats to establish a femoral fracture model and evaluated the effects of CoCl2 and TPS-Co on the healing of femoral fractures. In this study, treatment with TPS-Co for the same content of cobalt intake decreased the side effects associated with CoCl2 treatment and accelerated the healing of femoral fractures in rats. This treatment method promoted angiogenesis by upregulating the expression of vascular endothelial growth factor and hypoxia-inducible factor. Bone formation was promoted via the upregulation of the expression of bone morphogenetic protein 2 and serum bone alkaline phosphatase. TPS-Co was found to actively regulate bone and vascular systems, resulting in significant bone regeneration effects. Therefore, the Qingzhuan Dark Tea polysaccharide cobalt complex might be used as an additive or drug to promote fracture healing, and thus, it might have a huge market value.

A single dose of VEGF-A circular RNA sustains in situ long-term expression of protein to accelerate diabetic wound healing

Diabetic foot ulcer (DFU), which is characterised by damage to minute blood vessels or capillaries around wounds, is one of the most serious and dreaded complications of diabetes. It is challenging to repair chronic non-healing DFU wounds. Vascular endothelial growth factor (VEGF) plays an important role in angiogenesis and promotes wound healing in DFU. However, it is difficult to sustainably deliver VEGF to the wound site owing to its poor stability and easy degradation. To overcome this challenge, lipid nanoparticles (LNP) encapsulating circular RNA (circRNA) encoding VEGF-A have been developed to continuously generate and release VEGF-A and accelerate diabetic wound healing. First, VEGF-A circRNA was synthesized using group I intron autocatalysis strategy and confirmed by enzyme digestion, polymerase chain reaction, and sequencing assay. VEGF-A circRNA was encapsulated in ionizable lipid U-105-derived LNP (U-LNP) using microfluidic technology to fabricate U-LNP/VEGF-A circRNA. For comparison, a commercially ionizable lipid ALC-0315-derived LNP (A-LNP) encapsulating circRNA (A-LNP/circRNA) was used. Dynamic light scattering and transmission electron microscopy characterization indicated that U-LNP/circRNA had spherical structure with an average diameter of 108.5 nm, a polydispersity index of 0.22, and a zeta potential of -3.31 mV. The messenger RNA (mRNA) encapsulation efficiency (EE%) of U-LNP was 87.12%. In vitro transfection data confirmed better stability and long-term VEGF-A expression of circRNA compared with linear mRNA. Assessment of cytotoxicity and innate immunity further revealed that U-LNP/circRNA was biocompatible and induced a weak congenital immune response. Cell scratch and angiogenesis tests demonstrated the bioactivity of U-LNP/VEGF-A circRNA owing to its VEGF-A expression. In situ bioluminescence imaging of firefly luciferase (F-Luc) probe and ELISA demonstrated that circRNA had long-term and strong expression of VEGF-A in the first week, and a gradual decrease in the next week at the wound site and surrounding areas. Finally, a diabetic mouse model was used to validate the healing effect of U-LNP/VEGF-A circRNA formulation. The results showed that a single dose of U-LNP/VEGF-A circRNA administered by dripping resulted in almost complete wound recovery on day 12, which was significantly superior to that of U-LNP/VEGF-A linear mRNA, and it also outperformed recombinant human vascular endothelial growth factor (rhVEGF) injection and A-LNP/circRNA dripping. Histological analysis confirmed the healing efficiency and low toxicity of U-LNP/VEGF-A circRNA formulation. Together, VEGF-A circRNA delivered by U-105-derived LNP showed good performance in wound healing, which was ascribed to the long-term expression and continuous release of VEGF-A, and has potential applications for the treatment of diabetic foot ulcer wounds.

Large extracellular vesicles from induced pluripotent stem cell-marrow stem cells enhance limb angiogenesis via ERK/MAPK

Aim: This study aims to investigate the effects of large extracellular vesicles (EVs) induced by pluripotent stem cell-derived mesenchymal stem cells on lower limb ischemic disease and explore its potential mechanisms. Materials & methods: The pathology of muscles was accessed by H&E staining and immunofluorescence staining. In vitro, we conducted wound-healing assay, tube formation assay, RT qPCR, ELISA, RNA sequencing and proteomic analysis. Results: iMSCs-lEVs alleviated the injury of ischemic lower limb and promoted the recovery of lower limb function. In vitro, iMSCs-lEVs promoted the proliferation, migration, and angiogenesis of HMEC-1 cells by regulating the ERK/MAPK signing pathway. Conclusion: This study demonstrated that iMSCs-lEVs promoted endothelial cell angiogenesis via the ERK/MAPK signaling pathway, thereby improving function after lower limb ischemic injury.

Curcumin-loaded scaffolds in bone regeneration

In recent years, there has been a notable surge in the development of engineered bone scaffolds intended for the repair of bone defects. While autografts and allografts have traditionally served as the primary methods in bone tissue engineering, their inherent limitations have spurred the exploration of novel avenues in biomedical implant development. The emergence of bone scaffolds not only facilitates bone reconstruction but also offers a platform for the targeted delivery of therapeutic agents. There exists a pervasive interest in leveraging various drugs, proteins, growth factors, and biomolecules with osteogenic properties to augment bone formation, as the enduring side effects associated with current clinical modalities necessitate the pursuit of safer alternatives. Curcumin, the principal bioactive compound found in turmeric, has demonstrated notable efficacy in regulating the proliferation and differentiation of bone cells while promoting bone formation. Nevertheless, its utility is hindered by restricted water solubility and poor bioavailability. Strategies aimed at enhancing the solubility, stability, and bioavailability of curcumin, including formulation techniques such as liposomes and nanoparticles or its complexation with metals, have been explored. This investigation is dedicated to exploring the impact of curcumin on the proliferation, differentiation, and migration of osteocytes, osteoblasts, and osteoclasts.

Cell-free chitosan/silk fibroin/bioactive glass scaffolds with radial pore for in situ inductive regeneration of critical-size bone defects

Tissue-engineered is an effective method for repairing critical-size bone defects. The application of bioactive scaffold provides artificial matrix and suitable microenvironment for cell recruitment and extracellular matrix deposition, which can effectively accelerate the process of tissue regeneration. Among various scaffold properties, appropriate pore structure and distribution have been proven to play a crucial role in inducing cell infiltration differentiation and in-situ tissue regeneration. In this study, a chitosan (CS) /silk fibroin (SF) /bioactive glass (BG) composite scaffold with distinctive radially oriented pore structure was constructed. The composite scaffolds had stable physical and chemical properties, a unique pore structure of radial arrangement from the center to the periphery and excellent mechanical properties. In vitro biological studies indicated that the CS/SF/BG scaffold could promote osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and the expression of related genes due to the wide range of connected pore structures and released active elements. Furthermore, in vivo study showed CS/SF/BG scaffold with radial pores was more conducive to the repair of skull defects in rats with accelerated healing speed during the bone tissue remodeling process. These results demonstrated the developed CS/SF/BG scaffold would be a promising therapeutic strategy for the repair of bone defects regeneration.

Boric acid and Molybdenum trioxide synergistically stimulate osteogenic differentiation of human bone marrow-derived mesenchymal stromal cells

INTRODUCTION

Metals and their metal ions have been shown to exhibit certain biological functions that make them attractive for use in biomaterials, for example in bone tissue engineering (BTE) applications. Recent data shows that Molybdenum (Mo) is a potent inducer of osteogenic differentiation in human bone marrow-derived mesenchymal stromal cells (BMSCs). On the other hand, while boron (B) has been shown to enhance vascularization in BTE applications, its impact on osteogenic differentiation is volatile: while improved osteogenic differentiation has been described, other data show that B might slow down osteogenic differentiation or reduce the calcification of the extracellular matrix (ECM) when applied in higher doses. Still, the combination of pro-osteogenic Mo and pro-angiogenic B is certainly attractive in the context of biomaterials intended for the use in BTE.

METHODS

Therefore, the combined effect of molybdenum trioxide and boric acid at different ratios was investigated in this study to evaluate the effects on the viability, proliferation, osteogenic differentiation, ECM production and maturation of BMSCs.

RESULTS

Mo ions proved to be stronger osteoinductive compared to B, in fact, while some osteogenic differentiation markers were downregulated in the presence of B, the presence of Mo provided compensation. The combined application of B and Mo indicated a combination of individual effects, partially even enhancing the expected combined performance of the single stimulations.

CONCLUSIONS

The combination of B and Mo might be beneficial for BTE applications since the limited osteogenic properties of B can be compensated by Mo. Furthermore, since B is known to be pro-angiogenic, the combination of both substances may synergistically lead to improved vascularization and bone regeneration. Future studies should assess the angiogenic performance of this combination in greater detail.

Pro-angiogenic and antibacterial copper containing nanoparticles in PLGA/amorphous calcium phosphate bone nanocomposites

Large bone defects after trauma demand for adequate bone substitutes. Bone void fillers should be antibacterial and pro-angiogenic. One viable option is the use of composite materials like the combination of PLGA and amorphous calcium phosphate (aCaP). Copper stimulates angiogenesis and has antibacterial qualities. Either copper oxide (CuO) nanoparticles (NPs) were therefore added to PLGA/aCaP/CuO in different concentrations (1, 5 and 10 w/w %) or copper-doped tricalcium phosphate NPs (TCP with 2% of copper) were electrospun into PLGA/CuTCP nanocomposites. Bi-layered nanocomposites of PLGA/aCaP with different copper NPs (CuO or TCP) and a second layer of pristine PLGA were fabricated. Two clinical bacterial isolates (Staphylococcus aureus and Staphylococcus epidermidis) were used to assess antibacterial properties of the copper-containing materials. For angiogenesis, the chorioallantoic membrane (CAM) assay of the chicken embryo was performed. The higher the CuO content, the higher were the antibacterial properties, with 10 % CuO reducing bacterial adhesion most effectively. Vessel and cell densities were highest in the 5 % CuO containing scaffolds, while tissue integration was more pronounced at lower CuO content. The PLGA/aCaP/CuO (1 % CuO) behaved similar like PLGA/CuTCP in all angiogenic and antibacterial readouts, based on the same copper fraction. We conclude that CuO NPs or CuTCP NPs are useful components to increase angiogenic properties of nanocomposites and at the same time exhibiting antibacterial characteristics.

Bone ingrowth into a porous structure is achieved by preceding fibrogenesis and vascularization

Porous structures are frequently used in surgical implants to strengthen the interlocking power produced by bone ingrowth. Therefore, we aimed to elucidate the mechanism underlying bone ingrowth into a porous structure accompanied by vascularization. A nonbioactive polyetheretherketone implant with a 3D-printed porous structure was prepared and implanted in a bone hole created in the tibias of rabbits. We observed bone ingrowth in the same individual specimens immediately and at 2, 4, 8, and 12 weeks post-implantation using in-vivo computed tomography (CT). Furthermore, a detailed evaluation with blood vessels of each specimen at 2, 4, and 12 weeks was performed with ex-vivo CT and histological specimen. Additional histological evaluation was performed using thin sections of an implant made with thermoplastic polyurethane having the same structure. As a result, the bone invasion began after four weeks, when the construction of fibrous tissue and the spread of new blood vessels within the voids matured. As the bone matured in the load-bearing area, new blood vessels outside the bone matrix regressed. This longitudinal evaluation study suggests that preceding fibrogenesis and vascularization may be key in developing bone ingrowth. STATEMENT OF SIGNIFICANCE: A porous structure is an essential structure for dental and orthopedic implants because it provides strong fixation through bone invasion. Although it was known that vascularization was involved in this, the details were not known. This in vivo study revealed that in order for bone ingrowth to begin, a preparatory period of approximately 4 weeks was required to establish blood flow inside and outside the implant. Furthermore, it was confirmed that by spreading the fibrous structure in advance, it has an advantageous effect on the migration of cells involved in the formation of bones and blood vessels. We pointed out that it is necessary to consider fibrogenesis and vascularization when creating future implants.

Cobalt-doped layered hydroxide coating on titanium implants promotes vascularization and osteogenesis for accelerated fracture healing

Angiogenesis at the fracture site plays crucial roles in the endogenous osteogenesis process and is a prerequisite for the efficient repair of implant fixed bone defects. To improve the peri-implant vascularization of titanium implant for accelerating defect healing, we developed a Co-doped Mg-Al layered hydroxide coating on the surface of titanium using hydrothermal reaction and then modified the surface with gallic acid (Ti-LDH/GA). Gallic acid coating enabled the sustained release of Co2+ and Mg2+ to the defect site over a month. Ti-LDH/GA treatment profoundly stimulated the angiogenic potential of endothelial cells by upregulating the vascularization regulators such as vascular endothelial growth factor VEGF) and hypoxia-inducible factor-1α (HIF-1α), leading to enhanced osteogenic capability of mesenchymal stem cells (MSCs). These pro-bone healing benefits were attributed to the synergistic effects of Co ions and Mg ions in promoting angiogenesis and new bone formation. These insights collectively suggested the potent pro-osteogenic effect of Ti-LDH/GA through leveraging peri-implant vascularization, offering a new approach for developing biofunctional titanium implants.

Functional modulation of lysophosphatidic acid type 2 G-protein coupled receptor facilitates alveolar bone formation

Lipid biosynthesis is recently studied its functions in a range of cellular physiology including differentiation and regeneration. However, it still remains to be elucidated in its precise function. To reveal this, we evaluated the roles of lysophosphatidic acid (LPA) signaling in alveolar bone formation using the LPA type 2 receptor (LPAR2) antagonist AMG-35 (Amgen Compound 35) using tooth loss without periodontal disease model which would be caused by trauma and usually requires a dental implant to restore masticatory function. In this study, in vitro cell culture experiments in osteoblasts and periodontal ligament fibroblasts revealed cell type-specific responses, with AMG-35 modulating osteogenic differentiation in osteoblasts in vitro. To confirm the in vivo results, we employed a mouse model of tooth loss without periodontal disease. Five to 10 days after tooth extraction, AMG-35 facilitated bone formation in the tooth root socket as measured by immunohistochemistry for differentiation markers KI67, Osteocalcin, Periostin, RUNX2, transforming growth factor beta 1 (TGF-β1) and SMAD2/3. The increased expression and the localization of these proteins suggest that AMG-35 elicits osteoblast differentiation through TGF-β1 and SMAD2/3 signaling. These results indicate that LPAR2/TGF-β1/SMAD2/3 represents a new signaling pathway in alveolar bone formation and that local application of AMG-35 in traumatic tooth loss can be used to facilitate bone regeneration and healing for further clinical treatment.

Site-specific periosteal cells with distinct osteogenic and angiogenic characteristics

OBJECTIVES

This study aimed to investigate the site-specific characteristics of rat mandible periosteal cells (MPCs) and tibia periosteal cells (TPCs) to assess the potential application of periosteal cells (PCs) in bone tissue engineering (BTE).

MATERIALS AND METHODS

MPCs and TPCs were isolated and characterized. The potential of proliferation, migration, osteogenesis and adipogenesis of MPCs and TPCs were evaluated by CCK-8, scratch assay, Transwell assay, alkaline phosphatase staining and activity, Alizarin Red S staining, RT‒qPCR, and Western blot (WB) assays, respectively. Then, these cells were cocultured with human umbilical vein endothelial cells (HUVECs) to investigate their angiogenic capacity, which was assessed by scratch assay, Transwell assay, Matrigel tube formation assay, RT‒qPCR, and WB assays.

RESULTS

MPCs exhibited higher osteogenic potential, higher alkaline phosphatase activity, and more mineralized nodule formation, while TPCs showed a greater capability for proliferation, migration, and adipogenesis. MPCs showed higher expression of angiogenic factors, and the conditioned medium of MPCs accelerated the migration of HUVECs, while MPC- conditioned medium induced the formation of more tubular structure in HUVECs in vitro. These data suggest that compared to TPCs, MPCs exert more consequential proangiogenic effects on HUVECs.

CONCLUSIONS

PCs possess skeletal site-specific differences in biological characteristics. MPCs exhibit more eminent osteogenic and angiogenic potentials, which highlights the potential application of MPCs for BTE.

CLINICAL RELEVANCE

Autologous bone grafting as the main modality for maxillofacial bone defect repair has many limitations. Constituting an important cell type in bone repair and regeneration, MPCs show greater potential for application in BTE, which provides a promising treatment option for maxillofacial bone defect repair.

Recent advancement in vascularized tissue-engineered bone based on materials design and modification

Bone is one of the most vascular network-rich tissues in the body and the vascular system is essential for the development, homeostasis, and regeneration of bone. When segmental irreversible damage occurs to the bone, restoring its vascular system by means other than autogenous bone grafts with vascular pedicles is a therapeutic challenge. By pre-generating the vascular network of the scaffold in vivo or in vitro, the pre-vascularization technique enables an abundant blood supply in the scaffold after implantation. However, pre-vascularization techniques are time-consuming, and in vivo pre-vascularization techniques can be damaging to the body. Critical bone deficiencies may be filled quickly with immediate implantation of a supporting bone tissue engineered scaffold. However, bone tissue engineered scaffolds generally lack vascularization, which requires modification of the scaffold to aid in enhancing internal vascularization. In this review, we summarize the relationship between the vascular system and osteogenesis and use it as a basis to further discuss surgical and cytotechnology-based pre-vascularization strategies and to describe the preparation of vascularized bone tissue engineered scaffolds that can be implanted immediately. We anticipate that this study will serve as inspiration for future vascularized bone tissue engineered scaffold construction and will aid in the achievement of clinical vascularized bone.

Dual Photo-Enhanced Interpenetrating Network Hydrogel with Biophysical and Biochemical Signals for Infected Bone Defect Healing

The healing of infected bone defects (IBD) is a complex physiological process involving a series of spatially and temporally overlapping events, including pathogen clearance, immunological modulation, vascularization, and osteogenesis. Based on the theory that bone healing is regulated by both biochemical and biophysical signals, in this study, a copper doped bioglass (CuBGs)/methacryloyl-modified gelatin nanoparticle (MA-GNPs)/methacrylated silk fibroin (SilMA) hybrid hydrogel is developed to promote IBD healing. This hybrid hydrogel demonstrates a dual-photocrosslinked interpenetrating network mechanism, wherein the photocrosslinked SilMA as the main network ensures structural integrity, and the photocrosslinked MA-GNPs colloidal network increases strength and dissipates loading forces. In an IBD model, the hydrogel exhibits excellent biophysical characteristics, such as adhesion, adaptation to irregular defect shapes, and in situ physical reinforcement. At the same time, by sequentially releasing bioactive ions such as Cu2+ , Ca2+ , and Si2+ ions from CuBGs on demand, the hydrogel spatiotemporally coordinates antibacterial, immunomodulatory and bone remodeling events, efficiently removing infection and accelerating bone repair without the use of antibiotics or exogenous recombinant proteins. Therefore, the hybrid hydrogel can be used as a simple and effective method for the treatment of IBD.

Investigations into the effects of scaffold microstructure on slow-release system with bioactive factors for bone repair

In recent years, bone tissue engineering (BTE) has played an essential role in the repair of bone tissue defects. Although bioactive factors as one component of BTE have great potential to effectively promote cell differentiation and bone regeneration, they are usually not used alone due to their short effective half-lives, high concentrations, etc. The release rate of bioactive factors could be controlled by loading them into scaffolds, and the scaffold microstructure has been shown to significantly influence release rates of bioactive factors. Therefore, this review attempted to investigate how the scaffold microstructure affected the release rate of bioactive factors, in which the variables included pore size, pore shape and porosity. The loading nature and the releasing mechanism of bioactive factors were also summarized. The main conclusions were achieved as follows: i) The pore shapes in the scaffold may have had no apparent effect on the release of bioactive factors but significantly affected mechanical properties of the scaffolds; ii) The pore size of about 400 μm in the scaffold may be more conducive to controlling the release of bioactive factors to promote bone formation; iii) The porosity of scaffolds may be positively correlated with the release rate, and the porosity of 70%-80% may be better to control the release rate. This review indicates that a slow-release system with proper scaffold microstructure control could be a tremendous inspiration for developing new treatment strategies for bone disease. It is anticipated to eventually be developed into clinical applications to tackle treatment-related issues effectively.

Skin precursor‐derived Schwann cells accelerate in vivo prevascularization of tissue‐engineered nerves to promote peripheral nerve regeneration

Prevascularization strategies have become a hot spot in tissue engineering. As one of the potential candidates for seed cells, skin precursor-derived Schwann cells (SKP-SCs) were endowed with a new role to more efficiently construct prevascularized tissue-engineered peripheral nerves. The silk fibroin scaffolds seeded with SKP-SCs were prevascularized through subcutaneously implantation, which was further assembled with the SKP-SC-containing chitosan conduit. SKP-SCs expressed pro-angiogenic factors in vitro and in vivo. SKP-SCs significantly accelerated the satisfied prevascularization in vivo of silk fibroin scaffolds compared with VEGF. Moreover, the NGF expression revealed that pregenerated blood vessels adapted to the nerve regeneration microenvironment through reeducation. The short-term nerve regeneration of SKP-SCs-prevascularization was obviously superior to that of non-prevascularization. At 12 weeks postinjury, both SKP-SCs-prevascularization and VEGF-prevascularization significantly improved nerve regeneration with a comparable degree. Our figures provide a new enlightenment for the optimization of prevascularization strategies and how to further utilize tissue engineering for better repair.

Multifunctional porous poly (L-lactic acid) nanofiber membranes with enhanced anti-inflammation, angiogenesis and antibacterial properties for diabetic wound healing

With increased diabetes incidence, diabetic wound healing is one of the most common diabetes complications and is characterized by easy infection, chronic inflammation, and reduced vascularization. To address these issues, biomaterials with multifunctional antibacterial, immunomodulatory, and angiogenic properties must be developed to improve overall diabetic wound healing for patients. In our study, we prepared porous poly (L-lactic acid) (PLA) nanofiber membranes using electrospinning and solvent evaporation methods. Then, sulfated chitosan (SCS) combined with polydopamine-gentamicin (PDA-GS) was stepwise modified onto porous PLA nanofiber membrane surfaces. Controlled GS release was facilitated via dopamine self-polymerization to prevent early stage infection. PDA was also applied to PLA nanofiber membranes to suppress inflammation. In vitro cell tests results showed that PLA/SCS/PDA-GS nanofiber membranes immuomodulated macrophage toward the M2 phenotype and increased endogenous vascular endothelial growth factor secretion to induce vascularization. Moreover, SCS-contained PLA nanofiber membranes also showed good potential in enhancing macrophage trans-differentiation to fibroblasts, thereby improving wound healing processes. Furthermore, our in vitro antibacterial studies against Staphylococcus aureus indicated the effective antibacterial properties of the PLA/SCS/PDA-GS nanofiber membranes. In summary, our novel porous PLA/SCS/PDA-GS nanofiber membranes possessing enhanced antibacterial, anti-inflammatory, and angiogenic properties demonstrate promising potential in diabetic wound healing processes.

A Review of 3D Polymeric Scaffolds for Bone Tissue Engineering: Principles, Fabrication Techniques, Immunomodulatory Roles, and Challenges

Over the last few years, biopolymers have attracted great interest in tissue engineering and regenerative medicine due to the great diversity of their chemical, mechanical, and physical properties for the fabrication of 3D scaffolds. This review is devoted to recent advances in synthetic and natural polymeric 3D scaffolds for bone tissue engineering (BTE) and regenerative therapies. The review comprehensively discusses the implications of biological macromolecules, structure, and composition of polymeric scaffolds used in BTE. Various approaches to fabricating 3D BTE scaffolds are discussed, including solvent casting and particle leaching, freeze-drying, thermally induced phase separation, gas foaming, electrospinning, and sol-gel techniques. Rapid prototyping technologies such as stereolithography, fused deposition modeling, selective laser sintering, and 3D bioprinting are also covered. The immunomodulatory roles of polymeric scaffolds utilized for BTE applications are discussed. In addition, the features and challenges of 3D polymer scaffolds fabricated using advanced additive manufacturing technologies (rapid prototyping) are addressed and compared to conventional subtractive manufacturing techniques. Finally, the challenges of applying scaffold-based BTE treatments in practice are discussed in-depth.

Collaborative Design of MgO/FeOx Nanosheets on Titanium: Combining Therapy with Regeneration

The repair of bone defects caused by osteosarcoma resection remains a clinical challenge because of the tumor recurrence and bacterial infection. Combining tumor and bacterial therapy with bone regeneration properties in bone implants is a promising strategy for the treatment of osteosarcoma. Here, a layer of MgO/FeO_x nanosheet is constructed on the Ti implant to prevent tumor recurrence and bacterial infection, while simultaneously accelerating bone formation. This MgO/FeO_x double metal oxide demonstrates good peroxidase activity to catalyze H₂ O₂ , which is rich in tumor microenvironment, to form reactive oxygen species (ROS), and shows good photothermal conversion capacity to produce photothermal effect, thus synergistically killing tumor cells and eliminating tumor tissue. In addition, it generates a local alkaline surface microenvironment to inhibit the energy metabolism of bacteria to enhance the photothermal antibacterial effect. Furthermore, benefiting from the generation of a Mg ion-containing alkaline microenvironment, this MgO/FeO_x film can promote the osteogenic differentiation of osteoblast and angiogenesis of vascular endothelial cells in vitro as well as accelerated bone formation in vivo. This study proposes a multifunctional platform for integrating tumor and bacterial therapy and bone regeneration, which has good application prospects for the treatment of osteosarcoma.

Targeting STING: From antiviral immunity to treat osteoporosis

The cGAS-STING signaling pathway can trigger innate immune responses by detecting dsDNA from outside or within the host. In addition, the cGAS-STING signaling pathway has emerged as a critical mediator of the inflammatory response and a new target for inflammatory diseases. STING activation leads to dimerization and translocation to the endoplasmic reticulum Golgi intermediate compartment or Golgi apparatus catalyzed by TBK1, triggers the production of IRF3 and NF-κB and translocates to the nucleus to induce a subsequent interferon response and pro-inflammatory factor production. Osteoporosis is a degenerative bone metabolic disease accompanied by chronic sterile inflammation. Activating the STING/IFN-β signaling pathway can reduce bone resorption by inhibiting osteoclast differentiation. Conversely, activation of STING/NF-κB leads to the formation of osteoporosis by increasing bone resorption and decreasing bone formation. In addition, activation of STING inhibits the generation of type H vessels with the capacity to osteogenesis, thereby inhibiting bone formation. Here, we outline the mechanism of action of STING and its downstream in osteoporosis and discuss the role of targeting STING in the treatment of osteoporosis, thus providing new ideas for the treatment of osteoporosis.

Core-shell oxygen-releasing fibers for annulus fibrosus repair in the intervertebral disc of rats

The repair of annulus fibrosus (AF) defect after discectomy in the intervertebral disc (IVD) has presented a challenge over the past decade. Hostile microenvironments in the IVD, including, compression and hypoxia, are critical issues that require special attention. Till date, little information is available on potential strategies to cope with the hypoxia dilemma in AF defect sites. In this study, perfluorotributylamine (PFTBA) core-shell fibers were fabricated by coaxial electrospinning to construct oxygen-releasing scaffold for promoting endogenous repair in the AF after discectomy. We demonstrated that PFTBA fibers (10% chitosan, chitosan: PCL, 1:6) could release oxygen for up to 144 ​h. The oxygen released from PFTBA fibers was found to protect annulus fibrosus stem cells (AFSCs) from hypoxia-induced apoptosis. In addition, the PFTBA fibers were able to promote proliferation, migration and extracellular matrix (ECM) production in AFSCs under hypoxia, highlighting their therapeutic potential in AF defect repair. Subsequent in vivo studies demonstrated that oxygen-supplying fibers were capable of ameliorating disc degeneration after discectomy, which was evidenced by improved disc height and morphological integrity in rats with the oxygen-releasing scaffolds. Further transcriptome analysis indicated that differential expression genes (DEGs) were enriched in "oxygen transport" and "angiogenesis", which likely contributed to their beneficial effect on endogenous AF regeneration. In summary, the oxygen-releasing scaffold provides novel insights into the oxygen regulation by bioactive materials and raises the therapeutic possibility of oxygen supply strategies for defect repair in AF, as well as other aerobic tissues.

Covalent immobilization of VEGF on allogeneic bone through polydopamine coating to improve bone regeneration

Objective: Promoting bone regeneration and repairing in bone defects is of great significance in clinical work. Using a simple and effective surface treatment method to enhance the osteogenic ability of existing bone scaffold is a promising method. In this article, we study the application of catecholic amino acid 3,4-dihydroxyphenylalanine (DOPA) surface coating chelated with vascular endothelial growth factor (VEGF) on allogeneic bone.

Method: Allogeneic bone is immersed in DOPA solution and DOPA form polydopamine (PDA) with good adhesion. Electron microscopy is used to characterize the surface characteristics of allogeneic bone. MC3T3-E1 cells were tested for biocompatibility and osteogenic signal expression. Finally, a 12-week rabbit bone defect model was established to evaluate bone regeneration capability.

Results: We found that the surface microenvironment of DOPA bonded allogeneic bone was similar to the natural allogeneic bone. VEGF loaded allografts exhibited satisfying biocompatibility and promoted the expression of osteogenic related signals in vitro. The VEGF loaded allografts healed the bone defect after 12 weeks of implantation that continuous and intact bone cortex was observed.

Conclusion: The PDA coating is a simple surface modification method and has mild properties and high adhesion. Meanwhile, the PDA coating can act on the surface modification of different materials. This study provides an efficient surface modification method for enhancing bone regeneration by PDA coating, which has a high potential for translational clinical applications.