Computer simulation of adsorption and sitting of CO2, N2, CH4 and water on a new Al(OH)-fumarate MOF

High-Throughput Screening of the CoRE-MOF-2019 Database for CO2 Capture from Wet Flue Gas: A Multi-Scale Modeling Strategy

Stabilizing the escalating CO₂ levels in the atmosphere is a grand challenge in view of the increasing global demand for energy, the majority of which currently comes from the burning of fossil fuels. Capturing CO₂ from point source emissions using solid adsorbents may play a part in meeting this challenge, and metal-organic frameworks (MOFs) are considered to be a promising class of materials for this purpose. It is important to consider the co-adsorption of water when designing materials for CO₂ capture from post-combustion flue gases. Computational high-throughput screening (HTS) is a powerful tool to identify top-performing candidates for a particular application from a large material database. Using a multi-scale modeling strategy that includes a machine learning model, density functional theory (DFT) calculations, force field (FF) optimization, and grand canonical Monte Carlo (GCMC) simulations, we carried out a systematic computational HTS of the all-solvent-removed version of the computation-ready experimental metal-organic framework (CoRE-MOF-2019) database for selective adsorption of CO₂ from a wet flue gas mixture. After initial screening based on the pore diameters, a total of 3703 unique MOFs from the database were considered for screening based on the FF interaction energies of CO₂, N₂, and H₂O molecules with the MOFs. MOFs showing stronger interactions with CO₂ compared to that with H₂O and N₂ were considered for the next level of screening based on the interaction energies calculated from DFT. CO₂-selective MOFs from DFT screening were further screened using two-component (CO₂ and N₂) and finally three-component (CO₂, N₂, and H₂O) GCMC simulations to predict the CO₂ capacity and CO₂/N₂ selectivity. Our screening study identified MOFs that show selective CO₂ adsorption under wet flue gas conditions with significant CO₂ uptake capacity and CO₂/N₂ selectivity in the presence of water vapor. We also analyzed the nature of pore confinements responsible for the observed CO₂ selectivity.

Experimental investigation of the dehumidification and decarburization performance of metal-organic frameworks in solid adsorption air conditioning

Solid adsorption air conditioning systems use solid adsorption materials to co-adsorb water vapor and carbon dioxide, allowing the humidity and carbon dioxide concentration in the air-conditioned room to be controlled. Exploring the co-adsorption mechanism of H₂O and CO₂ is essential for the screening of adsorbent materials, system design, and system optimization in solid adsorption air conditioning systems. A fixed-bed adsorption-desorption device was built, and the dynamic adsorption properties of three MIL adsorbent materials MIL-101(Cr), MIL-101(Fe), and MIL-100(Fe) for co-adsorption of H₂O and CO₂ were studied. The results showed that all three MIL adsorbent materials are capable of performing co-adsorption of H₂O and CO₂ and meet the requirements of solid adsorption air conditioning systems. MIL-101(Cr) is recommended for solid adsorption air conditioners where dehumidification is the main focus, while MIL-100(Fe) is recommended for solid adsorption air conditioners where carbon removal is the main focus.

Understanding the Effects of Binders in Gas Sorption and Acidity of Aluminium Fumarate Extrudates

Understanding the impact of shaping processes on solid adsorbents is critical for the implementation of MOFs in industrial separation processes or as catalytic materials. Production of MOF‐containing shaped particles is typically associated with loss of porosity and modification of acid sites, two phenomena that affect their performance. Herein, we report a detailed study on how extrusion affects the crystallinity, porosity, and acidity of the aluminium fumarate MOF with clays or SiO₂ gel binders. Thorough characterization showed that the clay binders confer the extrudates a good mechanical robustness at the expense of porosity, while silica gel shows an opposite trend. The CO₂ selectivity towards CH₄, of interest for natural gas separation processes, is maintained upon the extrusion process. Moreover, probe FTIR spectroscopy revealed no major changes in the types of acid sites. This study highlights that these abundant and inexpensive clay materials may be used for scaling MOFs as active adsorbents.

Understanding the Effect of Water on CO2 Adsorption

Carbon capture from large sources and ambient air is one of the most promising strategies to curb the deleterious effect of greenhouse gases. Among different technologies, CO₂ adsorption has drawn widespread attention mostly because of its low energy requirements. Considering that water vapor is a ubiquitous component in air and almost all CO₂-rich industrial gas streams, understanding its impact on CO₂ adsorption is of critical importance. Owing to the large diversity of adsorbents, water plays many different roles from a severe inhibitor of CO₂ adsorption to an excellent promoter. Water may also increase the rate of CO₂ capture or have the opposite effect. In the presence of amine-containing adsorbents, water is even necessary for their long-term stability. The current contribution is a comprehensive review of the effects of water whether in the gas feed or as adsorbent moisture on CO₂ adsorption. For convenience, we discuss the effect of water vapor on CO₂ adsorption over four broadly defined groups of materials separately, namely (i) physical adsorbents, including carbons, zeolites and MOFs, (ii) amine-functionalized adsorbents, and (iii) reactive adsorbents, including metal carbonates and oxides. For each category, the effects of humidity level on CO₂ uptake, selectivity, and adsorption kinetics under different operational conditions are discussed. Whenever possible, findings from different sources are compared, paying particular attention to both similarities and inconsistencies. For completeness, the effect of water on membrane CO₂ separation is also discussed, albeit briefly.

Effect of axial molecules and linker length on CO2 adsorption and selectivity of CAU-8: a combined DFT and GCMC simulation study

Density Functional Theory (DFT) and Grand Canonical Monte Carlo (GCMC) calculations are performed to study the structures and carbon dioxide (CO₂) adsorption properties of the newly designed metal–organic framework based on the CAU-8 (CAU stands for Christian-Albrechts Universität) prototype. In the new MOFs, the 4,4′-benzophenonedicarboxylic acid (H₂BPDC) linker of CAU-8 is substituted by 4,4′-oxalylbis(azanediyl)dibenzoic acid (H₂ODA) and 4,4′-teraphthaloylbis(azanediyl)dibenzoic acid (H₂TDA) containing amide groups (–CO–NH- motif). Furthermore, MgO₆ octahedral chains where dimethyl sulfoxide (DMSO) decorating the axial position bridged two Mg²⁺ ions are considered. The formation energies indicate that modified CAU-8 is thermodynamically stable. The reaction mechanisms between the metal clusters and the linkers to form the materials are also proposed. GCMC calculations show that CO₂ adsorptions and selectivities of Al-based MOFs are better than those of Mg-based MOFs, which is due to DMSO. Amide groups made CO₂ molecules more intensively distributed besides organic linkers. CO₂ uptakes and selectivities of MOFs containing H₂TDA linkers are better in comparison with those of MOFs containing H₂BPDC linkers or H₂ODA linkers.

Density Functional Theory (DFT) and Grand Canonical Monte Carlo (GCMC) calculations are performed to study the structures and CO₂ adsorption properties of the newly designed metal–organic framework based on the CAU-8 prototype.

Unlocking the Effect of H2O on CO2 Separation Performance of Promising MOFs Using Atomically Detailed Simulations

Metal organic frameworks (MOFs) have been considered as potential adsorbents for adsorption-based CO₂/CH₄ and CO₂/N₂ separations because of their high CO₂ selectivities and high working capacities. H₂O in flue gas and natural gas streams affects the gas uptake capacities of MOFs. However, the presence of H₂O is commonly neglected in high-throughput computational screening studies while assessing the CO₂ separation performances of MOFs. In this study, the impact of the presence of H₂O on the CO₂ separation performances of 13 MOFs that were previously identified as the best adsorbent candidates among several thousands of MOFs was examined. Molecular simulations were used to compute selectivity, working capacity, regenerability, and adsorbent performance score (APS) of MOFs considering separation of binary CO₂/CH₄, CO₂/N₂, and ternary CO₂/CH₄/H₂O and CO₂/N₂/H₂O mixtures. The results showed that introduction of H₂O as the third component into binary CO₂/CH₄ and CO₂/N₂ mixtures significantly affected the adsorbent evaluation metrics of MOFs that have strong affinity toward H₂O because of the presence of specific functional groups and/or extra framework anions in the framework. Remarkable increases in CO₂/N₂ selectivities of MOFs were observed in the presence of H₂O. On the other hand, simulations performed using MOFs that are preloaded with H₂O to mimic the exposure of MOFs to humidity prior to gas adsorption revealed drastic decreases in CO₂ working capacities and APSs of MOFs both for CO₂/CH₄ and CO₂/N₂ separations. These results will be useful for the design and development of efficient MOF adsorbents for CO₂ capture under humid conditions.