Characterization of PHB storage in activated sludge extended filamentous bacteria by automated colour image analysis

Characterization of polyhydroxybutyrate (PHB) synthesized by newly isolated rare actinomycetes Aquabacterium sp. A7-Y

Polyhydroxyalkanoates (PHAs) as biodegradable plastics have attracted increasing attention due to its biodegradable, biocompatible and renewable advantages. Exploitation some unique microbes for PHAs production is one of the most competitive approaches to meet complex industrial demand, and further develop next-generation industrial biotechnology. In this study, a rare actinomycetes strain A7-Y was isolated and identified from soil as the first PHAs producer of Aquabacterium genus. Produced PHAs by strain A7-Y was identified as poly(3-hydroxybutyrate) (PHB) based on its structure characteristics, which is also similar with commercial PHB. After optimization of fermentation conditions, strain A7-Y can produce 10.2 g/L of PHB in 5 L fed-batch fermenter, corresponding with 54 % PHB content of dry cell weight, which is superior to the reported actinomycetes species. Furthermore, the phaCAB operon in stain A7-Y was excavated to be responsible for the efficient PHB production and verified in recombinant Escherichia coli. Our results indicate that strain A7-Y and its biosynthetic gene cluster are potential candidates for developing a microbial formulation for the PHB production.

Aislamiento y caracterización de bacterias productoras de biopolimeros a partir de efluentes industriales

Se realizó una caracterización físico-química de los efluentes procedentes de industrias del sector educación, metalmecánico, lácteos y confitería de la ciudad de Manizales, Caldas; posteriormente se obtuvieron aislamientos, en medios diferenciales suplementados, de bacterias con potencial para la producción de biopolímeros a los cuales se les aplicó pruebas para la caracterización morfológica, bioquímica y molecular. Los parámetros físico químicos obtenidos de los efluentes industriales demuestran diferencias entre ellos, ya que cada industria genera diferentes residuos aportando una determinada contaminación al efluente, se obtuvieron 73 aislamientos productores de exopolisacáridos (EPS) y 101 productores de polihidroxialcanoatos (PHA), con características morfológicas y bioquímicas variables. El estudio muestra que los efluentes industriales son una gran fuente de bacterias de interés para la producción de diversos polímeros microbianos; principalmente aquellos que producen polímeros tipo biopoliésteres intracelulares como PHA, debido a su variabilidad físico-química y nutricional permitiendo que los microorganismos se adapten a diversas características medioambientales y de composición.

Usage of textile dyes BB41 and BR46 for microscopic examination of filamentous bacteria in activated sludge reactor: a new staining method

The existence of certain filamentous organisms may indicate one or more operation and control problems in activated sludge reactors. Microscopic evaluation of these filamentous organisms needs staining methods that can be achieved after some steps. This study is the first to show that textile dyes such as Astrazon Blue FGGL (BB41) and Astrazon Red FBL (BR46) can be used to identify filamentous organisms. Both dyes were used as a new, effective, and easy method for detecting the presence of filamentous bacteria. When contacted with BB41 and BR46, the filamentous bacteria and their characteristics were easily observed under the microscope. According to sources, textile dyes used in this study have not been used to diagnose filamentous bacteria before. According to the findings of this study, important morphological properties of filamentous bacteria were easily observed using BB41 and BR46. “Attached growth, branching, septa, and granules of various nutrients” were clearly seen by the stains (BB41 and BR46) with the help of this method. This method may allow the examiners to examine the specimens of filamentous bacteria in the activated sludge reactors. Detailed information has been presented in this paper.

Effects of beneficial microorganisms on nutrient removal and excess sludge production in an anaerobic-anoxic/oxic (A2O) process for municipal wastewater treatment

The performances of anaerobic-anoxic-oxic processes with (A²O-B) and without (A²O-C) beneficial microorganisms were compared to provide valuable insights on how they are affected by changes in the microbial biomass and community composition. Although the A²O-B process showed lower concentrations of mixed liquor suspended solids and mixed liquor volatile suspended solids than the A²O-C process under identical operating conditions, the A²O-B process was more effective for the removal of organic materials and nutrients compared with the A²O-C process. Furthermore, the compressibility and settleability of the activated sludge were significantly better in the A²O-B process than in the A²O-C process due to the enhanced decomposition of extracellular polymeric substances. These results indicated that the inoculation of beneficial microorganisms may increase the proportions of microorganisms in relation to the removal of organic materials, nutrients (i.e., Zoogloea, Dechloromonas, Nitrospira, and Nitrosomonas) and the reduction of the excess sludge (i.e., Proteobacteria and Bacteroidetes).

Quantitative image analysis of polyhydroxyalkanoates inclusions from microbial mixed cultures under different SBR operation strategies

Polyhydroxyalkanoates (PHAs) produced from mixed microbial cultures (MMC), regarded as potential substitutes of petrochemical plastics, can be found as intracellular granules in various microorganisms under limited nutrient conditions and excess of carbon source. PHA is traditionally quantified by laborious and time-consuming chromatography analysis, and a simpler and faster method to assess PHA contents from MMC, such as quantitative image analysis (QIA), is of great interest. The main purpose of the present work was to upgrade a previously developed QIA methodology (as reported by Mesquita et al. (Anal Chim Acta 770:36-44, 2013a, Anal Chim Acta 865:8-15, 2015)) for MMC intracellular PHA contents quantification, increase the studied intracellular PHA concentration range, and extend to different sequencing batch reactor (SBR) operation strategies. Therefore, the operation of a new aerobic dynamic feeding (ADF) SBR allowed further extending the studied operating conditions, dataset, and range of the MMC intracellular PHA contents from the previously reported anaerobic/aerobic cycle SBR. Nile Blue A (NBA) staining was employed for epifluorescence microscope visualization and image acquisition, further fed to a custom developed QIA. Data from each of the feast and famine cycles of both SBR were individually processed using chemometrics analysis, obtaining the correspondent partial least squares (PLS) models. The PHA concentrations determined from PLS models were further plotted against the results obtained in the standard chromatographic method. For both SBR, the predicted ability was higher at the end of the feast stage than for the famine stage. Indeed, an independent feast and famine QIA data treatment was found to be fundamental to obtain the best prediction abilities. Furthermore, a promising overall correlation (R ² of 0.83) could be found combining the overall QIA data regarding the PHA prediction up to a concentration of 1785.1 mg L^-1 (37.3 wt%). Thus, the results confirm that the presented QIA methodology can be seen as promising for estimating higher intracellular PHA concentrations for a larger reactors operation systems and further extending the prediction range of previous studies.

Microbial-based evaluation of foaming events in full-scale wastewater treatment plants by microscopy survey and quantitative image analysis

Activated sludge systems are prone to be affected by foaming occurrences causing the sludge to rise in the reactor and affecting the wastewater treatment plant (WWTP) performance. Nonetheless, there is currently a knowledge gap hindering the development of foaming events prediction tools that may be fulfilled by the quantitative monitoring of AS systems biota and sludge characteristics. As such, the present study focuses on the assessment of foaming events in full-scale WWTPs, by quantitative protozoa, metazoa, filamentous bacteria, and sludge characteristics analysis, further used to enlighten the inner relationships between these parameters. In the current study, a conventional activated sludge system (CAS) and an oxidation ditch (OD) were surveyed throughout a period of 2 and 3 months, respectively, regarding their biota and sludge characteristics. The biota community was monitored by microscopic observation, and a new filamentous bacteria index was developed to quantify their occurrence. Sludge characteristics (aggregated and filamentous biomass contents and aggregate size) were determined by quantitative image analysis (QIA). The obtained data was then processed by principal components analysis (PCA), cross-correlation analysis, and decision trees to assess the foaming occurrences, and enlighten the inner relationships. It was found that such events were best assessed by the combined use of the relative abundance of testate amoeba and nocardioform filamentous index, presenting a 92.9 % success rate for overall foaming events, and 87.5 and 100 %, respectively, for persistent and mild events.

Polyhydroxybutyrate production by direct use of waste activated sludge in phosphorus-limited fed-batch culture

Polyhydroxybutyrate (PHB) production directly by waste activated sludge (WAS) was investigated in aerobic fed-batch conditions using acetic acid as substrate. PHB production was induced by phosphorus limitation. WAS of different origin were tested with various degrees of phosphorus limitation and PHB contents of up to 70% (gCOD PHB/gCOD particulate) were obtained. This strategy showed the importance of maintaining cell growth for PHB production in order to increase PHB concentration and that the degree of phosphorus limitation has a direct impact on the quantity of PHB produced. Pyrosequencing of 16S rRNA transcripts showed changes in the active bacteria of the WAS microbial community as well as the acclimation of populations depending on sludge origin. The monitoring of the process appeared as the key factor for optimal PHB production by WAS. Different strategies are discussed and compared in terms of carbon yield and PHB content with the feast and famine selection process.

Quantitative image analysis for the characterization of microbial aggregates in biological wastewater treatment: a review

Quantitative image analysis techniques have gained an undeniable role in several fields of research during the last decade. In the field of biological wastewater treatment (WWT) processes, several computer applications have been developed for monitoring microbial entities, either as individual cells or in different types of aggregates. New descriptors have been defined that are more reliable, objective, and useful than the subjective and time-consuming parameters classically used to monitor biological WWT processes. Examples of this application include the objective prediction of filamentous bulking, known to be one of the most problematic phenomena occurring in activated sludge technology. It also demonstrated its usefulness in classifying protozoa and metazoa populations. In high-rate anaerobic processes, based on granular sludge, aggregation times and fragmentation phenomena could be detected during critical events, e.g., toxic and organic overloads. Currently, the major efforts and needs are in the development of quantitative image analysis techniques focusing on its application coupled with stained samples, either by classical or fluorescent-based techniques. The use of quantitative morphological parameters in process control and online applications is also being investigated. This work reviews the major advances of quantitative image analysis applied to biological WWT processes.

Biologically induced phosphorus precipitation in aerobic granular sludge process

Aerobic granular sludge is a promising process for nutrient removal in wastewater treatment. In this work, for the first time, biologically induced precipitation of phosphorus as hydroxyl-apatite (Ca(5)(PO(4))(3)(OH)) in the core of granules is demonstrated by direct spectral and optical analysis: Raman spectroscopy, Energy dispersive X-ray (EDX) coupled with Scanning Electron Microscopy (SEM), and X-ray diffraction analysis are performed simultaneously on aerobic granules cultivated in a batch airlift reactor for 500 days. Results reveal the presence of mineral clusters in the core of granules, concentrating all the calcium and considerable amounts of phosphorus. Hydroxyapatite appears as the major mineral, whereas other minor minerals could be transiently produced but not appreciably accumulated. Biologically induced precipitation was responsible for 45% of the overall P removal in the operating conditions tested, with pH varying from 7.8 to 8.8. Major factors influencing this phenomenon (pH, anaerobic phosphate release, nitrification denitrification) need to be investigated as it is an interesting way to immobilize phosphorus in a stable and valuable product.