Desulfurization with Thialkalivibrio versutus immobilized on magnetic nanoparticles modified with 3-aminopropyltriethoxysilane

Enhanced Biodesulfurization with a Microbubble Strategy in an Airlift Bioreactor with Haloalkaliphilic Bacterium Thioalkalivibrio versutus D306

Biodesulfurization under haloalkaline conditions requires limiting oxygen and additional energy in the system to deliver high mixing quality control. This study considers biodesulfurization in an airlift bioreactor with uniform microbubbles generated by a fluidic oscillation aeration system to enhance the biological desulfurization process and its hydrodynamics. Fluidic oscillation aeration in an airlift bioreactor requires minimal energy input for microbubble generation. This aeration system produced 81.87% smaller average microbubble size than the direct aeration system in a bubble column bioreactor. The biodesulfurization phase achieved a yield of 94.94% biological sulfur, 84.91% biological sulfur selectivity, and 5.06% sulfur oxidation performance in the airlift bioreactor with the microbubble strategy. The biodesulfurization conditions of thiosulfate via Thioalkalivibrio versutus D306 are revealed in this study. The biodesulfurization conditions in the airlift bioreactor with the fluidic oscillation aeration system resulted in the complete conversion of thiosulfate with 27.64% less sulfate production and 10.34% more biological sulfur production than in the bubble column bioreactor. Therefore, pleasant hydrodynamics via an airlift bioreactor mechanism with microbubbles is favored for biodesulfurization under haloalkaline conditions.

Recent advances in microbial capture of hydrogen sulfide from sour gas via sulfur-oxidizing bacteria

Biological desulfurization offers several remarkably environmental advantages of operation at ambient temperature and atmospheric pressure, no demand of toxic chemicals as well as the formation of biologically re-usable sulfur (S0), which has attracted increasing attention compared to conventionally physicochemical approaches in removing hydrogen sulfide from sour gas. However, the low biomass of SOB, the acidification of process solution, the recovery of SOB, and the selectivity of bio-S0 limit its industrial application. Therefore, more efforts should be made in the improvement of the BDS process for its industrial application via different research perspectives. This review summarized the recent research advances in the microbial capture of hydrogen sulfide from sour gas based on strain modification, absorption enhancement, and bioreactor modification. Several efficient solutions to limitations for the BDS process were proposed, which paved the way for the future development of BDS industrialization.

Efficient biotransformation of sulfide in anaerobic sequencing batch reactor by composite microbial agent: performance optimization and microbial community analysis

Sulfur-containing wastewater is very common as an industrial waste, yet a high-efficiency composite microbial agent for sulfur-containing wastewater treatment is still lacking. In this work, three novel and efficient desulfurizing bacteria were isolated from the sewage treatment tank of Zhejiang Satellite Energy Co., Ltd. They were identified as Brucella melitensis (S1), Ochrobactrum oryzae (S8), and Achromobacter xylosoxidans (S9). These three strains of bacteria were responsible for the oxidative metabolism of sodium sulfide via a similar polythionate pathway, which could be expressed as follows: S^2-→S₂O₃^2-/S⁰→SO₃^2-→SO₄^2-. Activated carbon, wheat bran, and diatomite at 1:1:1 ratio are used as carriers to construct a composite microbial agent containing the three bacteria. The desulfurization efficiency of 95% was predicted by response surface methodology under the following optimum conditions: the dosage of the inoculum was 3 g/L, pH 7.86, and temperature of 39 °C. Additionally, the impact resistance was studied in the anaerobic sequencing batch reactor. The removal capacity of microbial agent reached 98%. High-throughput analysis showed that composite microbial agent increased bacterial evenness and diversity, and the relative abundance of Brucellaceae increased from 5.04 to 8.79% in the reactor. In the process of industrial wastewater transformation, the transformation rate of sulfide by composite microbial agent was maintained between 70 and 81%. The composite microbial agent had potential for the treatment of sulfur-containing wastewater.

Recent advances in biocatalysts engineering for polyethylene terephthalate plastic waste green recycling

The massive waste of poly(ethylene terephthalate) (PET) that ends up in the landfills and oceans and needs hundreds of years for degradation has attracted global concern. The poor stability and productivity of the available PET biocatalysts hinder their industrial applications. Active PET biocatalysts can provide a promising avenue for PET bioconversion and recycling. Therefore, there is an urgent need to develop new strategies that could enhance the stability, catalytic activity, solubility, productivity, and re-usability of these PET biocatalysts under harsh conditions such as high temperatures, pH, and salinity. This has raised great attention in using bioengineering strategies to improve PET biocatalysts' robustness and catalytic behavior. Herein, historical and forecasting data of plastic production and disposal were critically reviewed. Challenges facing the PET degradation process and available strategies that could be used to solve them were critically highlighted and summarized. In this review, we also discussed the recent progress in enzyme bioengineering approaches used for discovering new PET biocatalysts, elucidating the degradation mechanism, and improving the catalytic performance, solubility, and productivity, critically assess their strength and weakness and highlighting the gaps of the available data. Discovery of more potential PET hydrolases and studying their molecular mechanism extensively via solving their crystal structure will widen this research area to move forward the industrial application. A deeper knowledge of PET molecular and degradation mechanisms will give great insight into the future identification of related enzymes. The reported bioengineering strategies during this review could be used to reduce PET crystallinity and to increase the operational temperature of PET hydrolyzing enzymes.

Immobilization of sulfate and thiosulfate-reducing biomass on sand under haloalkaline conditions

Biological sulfate and thiosulfate reduction under haloalkaline conditions can be applied to treat waste streams from biodesulfurization systems. However, the lack of microbial aggregation under haloalkaline conditions limits the volumetric rates of sulfate and thiosulfate reducing bioreactors. As biomass retention in haloalkaline bioreactors has not been studied before, sand was chosen as a biomass carrier material to increase cell retention and consequently raise the volumetric rates. The results showed that ~10 fold higher biomass concentrations could be achieved with sand, compared to previous studies without carrier addition. The volumetric rates of sulfate/thiosulfate reduction increased approximately 4.5 times. Biomass attachment to the sand was restricted to cavities within the sand particles. Acetate produced by acetogenic bacteria from H₂ and CO₂ was used as carbon source for biomass growth, while formate that was also produced from H₂ and CO₂ enhanced sulfate reduction. The microbial community composition was analyzed by 16S rRNA gene amplicon sequencing, and Tindallia related bacteria were probably responsible for formate formation from hydrogen. The community attached to the sand particles was similar to the suspended fraction, but the relative abundance of sequences most closely related to Desulfohalobiaceae was much higher in the attached fraction compared to the suspended fraction (30% and 13%, respectively). The results indicated that even though the biomass attachment to sand was poor, it still increased the biomass concentration and consequently the sulfate and thiosulfate reduction volumetric rates.

The key role of Geobacter in regulating emissions and biogeochemical cycling of soil-derived greenhouse gases

In the past two decades, more and more attentions have been paid to soil-derived greenhouse gases (GHGs) including carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) because there are signs that they have rising negative impacts on the sustainability of the earth surface system. Farmlands, particularly paddy soils, have been regarded as the most important emitter of GHGs (nearly 17%) due to a large influx of fertilization and the abundance in animals, plants and microorganisms. Geobacter, as an electroactive microorganism widely occurred in soil, has been well studied on electron transport mechanisms and the direct interspecies electron transfer. These studies on Geobacter illustrate that it has the ability to be involved in the pathways of soil GHG emissions through redox reactions under anaerobic conditions. In this review, production mechanisms of soil-derived GHGs and the amount of these GHGs produced had been first summarized. The cycling process of CH₄ and N₂O was described from the view of microorganisms and discussed the co-culture relationships between Geobacter and other microorganisms. Furthermore, the role of Geobacter in the production of soil-derived GHGs is defined by biogeochemical cycling. The complete view on the effect of Geobacter on the emission of soil-derived GHGs has been shed light on, and appeals further investigation.