Screening sediment samples used as anolytes in microbial fuel cells for microbial electron transfer activity using DREAM assay

Optimizing electrochemically active microorganisms as a key player in the bioelectrochemical system: Identification methods and pathways to large-scale implementation

The rapid global economic growth driven by industrialization and population expansion has resulted in significant issues, including reliance on fossil fuels, energy scarcity, water crises, and environmental emissions. To address these issues, bioelectrochemical systems (BES) have emerged as a dual-purpose solution, harnessing electrochemical processes and the capabilities of electrochemically active microorganisms (EAM) to simultaneously recover energy and treat wastewater. This review examines critical performance factors in BES, including inoculum selection, pretreatment methods, electrodes, and operational conditions. Further, authors explore innovative approaches to suppress methanogens and simultaneously enhance the EAM in mixed cultures. Additionally, advanced techniques for detecting EAM are discussed. The rapid detection of EAM facilitates the selection of suitable inoculum sources and optimization of enrichment strategies in BESs. This optimization is essential for facilitating the successful scaling up of BES applications, contributing substantially to the realization of clean energy and sustainable wastewater treatment. This analysis introduces a novel viewpoint by amalgamating contemporary research on the selective enrichment of EAM in mixed cultures. It encompasses identification and detection techniques, along with methodologies tailored for the selective enrichment of EAM, geared explicitly toward upscaling applications in BES.

A low-cost optofluidic platform for the colorimetric assessment of bacterial activity in domestic wastewater

Optofluidic chips represent a cost-effective platform for the development of miniaturized devices to perform biochemical reactions at a microscale. The dye reduction-based electron-transfer activity monitoring (DREAM) assay is a colorimetric approach that has been adopted for the rapid assessment of bacterial activity in bioreactors used in bioremediation and industrial biotechnology. A three-layered PMMA-based optofluidic chip having laser-machined microchannels coupled with a detection system comprising an LED source and a photodiode interfaced with a microcontroller for automation constituted the experimental setup. Data acquisition was executed using a user-friendly graphical user interface (GUI) that enabled real-time monitoring of bacterial activity. A performance comparison study was performed to assess the viability of replacing expensive spectrophotometers with an inexpensive photodiode for optoelectronic automation. Bacterial activity across different growth phases of a bacterial culture, initiated using untreated domestic wastewater, was assessed by the detector on the basis of voltage readings corresponding to the rate of decrease in the blue color intensity. The highest activity observed corresponded to the log phase of the growth curve. The optimal time for measurement of bacterial activity within the log phase of the growth curve was identified using different dilutions of untreated domestic wastewater. Furthermore, the device showed comparable sensitivities for samples from different time points in a bacterial growth curve and for different dilutions of untreated domestic wastewater samples. The device also demonstrated a linear response in the assessment of bacterial activity as a function of the change in strength of untreated domestic wastewater. This is the first report on colorimetric assessment of bacterial activity using a low-cost photodiode-based device at the microscale constructed using off-the-shelf components.

Study on the effect of synergy effect between the mixed cultures on the power generation of microbial fuel cells

Microbial fuel cells (MFC) can use microorganisms to directly convert the chemical energy of organic matter into electrical energy, and generate electrical energy while pollutants degradation. To solve the critical problem of lower power yield of power production, this study selected Saccharomyces cerevisiae, Escherichia coli, Pseudomonas aeruginosa, and Bacillus subtilis as the anodic inoculums. The influence of the mixed bacteria on the power-producing effect of MFC and the synergy effect between the electrochemically active bacteria in mixed cultures were discussed. The results showed that among the mixed culture system, only the mixed cultures MFC composed of Saccharomyces cerevisiae and Bacillus subtilis had a significant increase in power generation capacity, which could reach to 554 mV. Further analysis of the electrochemical and microbiological performance of this system was conducted afterward to verify the synergy effect between Saccharomyces cerevisiae and Bacillus subtilis. The riboflavin produced by Bacillus subtilis could be utilized by Saccharomyces cerevisiae to enhance the power generation capacity. Meanwhile, Saccharomyces cerevisiae could provide carbon source and electron donor for Bacillus subtilis through respiration. Finally, in the experiment of adding exogenous riboflavin in the mixed bacterial MFC, the result indicated that the mixed bacterial MFC chose the self-secreting riboflavin over the exogenous riboflavin as the electron mediator, and the excess riboflavin might hinder the electron trasfer.

Synergistic effects in a microbial fuel cell between co-cultures and a photosynthetic alga Chlorella vulgaris improve performance

Microbial communities are catalysts that drive the operation of microbial fuel cells (MFCs). In this study, the use of a defined co-culture of Escherichia coli and Pseudomonas aeruginosa towards improved power generation in MFCs is described. The co-culture has been initially evaluated for substrate consumption, biofilm formation and microbial electron transfer activity. The co-culture gave an enhanced power density of 190.44 mW m⁻², while E. coli and P. aeruginosa as pure cultures generated lesser power densities of 139.24 and 158.76 mW m⁻² respectively. The photosynthetic alga Chlorella vulgaris was then inoculated in the cathode chamber. Co-cultures in the presence of C. vulgaris improved the mean power density from 175 mW m⁻² to 248 mW m⁻², a 41.7% rise. A synergistic effect was observed when the co-cultures were coupled with C. vulgaris. Combining co-cultures with photosynthetic MFCs offers a lot of promise in studying mechanisms and expanding the nature of applications.

Dye reduction-based electron-transfer activity monitoring assay for assessing microbial electron transfer activity of microbial fuel cell inocula

Microbial fuel cells (MFC) utilize microbes as catalysts to convert chemical energy to electricity. Inocula used for MFC operation must therefore contain active microbial population. The dye reduction-based electron-transfer activity monitoring (DREAM) assay was employed to evaluate different inocula used in MFCs for their microbial bioelectrical activity. The assay utilizes the redox property of Methylene Blue to undergo color change from blue to colorless state upon microbial reduction. The extent of Methylene Blue reduction was denoted as the DREAM assay coefficient. DREAM assay was initially performed on a microbial culture along with the growth curve and estimation of colony forming units (CFUs). DREAM coefficient correlated to the CFU/mL obtained over time as growth progressed. The assay was then extended to water samples (domestic sewage, lake and a man-made pond) serving as inocula in MFCs. Domestic wastewater gave the highest DREAM coefficient (0.300 ± 0.05), followed by pond (0.224 ± 0.07) and lake (0.157 ± 0.04) water samples. Power density obtained conformed to the DREAM coefficient values, with the three samples generating power densities of 46.45 ± 5.1, 36.12 ± 3.2 and 25.08 ± 4.3 mW/m² respectively. We have also studied the role of addition of various carbon sources and their concentrations towards improving the sensitivity of the assay. The DREAM assay is a rapid, easy-to-perform and cost-effective method to assess inocula for their suitability as anolytes in terms of electron transfer potential in MFCs.

Scratching and transplanting of electro-active biofilm in fruit peeling leachate by ultrasound: re-inoculation in new microbial fuel cell for enhancement of bio-energy production and organic matter detection

OBJECTIVE

An electro-active biofilm of Fruit Peeling (FP) leachate was formed onto the Carbon Felt (CF) bio-anode in a Microbial Fuel Cell (MFC), after functioning for a long time. The electro active-biofilm thus formed was then scratched by ultrasound and re-inoculated in a new leachate to be transplanted onto the bio-anode. This procedure allowed the microbial electron charge transfer and therefore the enhancement of the bio-energy production of the fuel cell.

RESULTS

By using the repetitive mechanical biofilm removal, re-suspension and electrochemically facilitated biofilm formation, the voltage was substantially increased. In effect, the voltage of the 1st G of biofilm, rose gradually and reached its maximum value of 65 mV after 10 days. Whilst the 2nd generation allowed to obtain the maximum voltage 276 mV and without any lag time. The DCO abatement using the 1st G biofilm was 68% greater than the 3rd G 26%. Besides, the electrochemical impedance spectroscopy characterization and cyclic voltammetry of bio-anode with 2nd G biofilm confirmed the ability of electro-active biofilm formation on a new support. The biofilm transplanted showed thus greater kinetic performance, with reduced lag time demonstrating the interest of the selection that took place during the formation of successive biofilms.

CONCLUSIONS

Despite the transplantation of the electro-active biofilm onto the bio-anode, the MFC still produced relatively lower power output. Nevertheless, it has been tested successfully for monitoring and detecting the oxidation of sodium acetate substrate in the very wide concentration range 0.0025-35 g/l.