Effect of shipping traffic on biofouling invasion success at population and community levels

Preliminary Analysis of Hydrodynamic Drag Reduction and Fouling Resistance of Surfaces Inspired by the Mollusk Shell, Dosinia juvenilis

Many species of plants and animals show an ability to resist fouling with surface topographies tailored to their environments. The mollusk species Dosinia juvenilis has demonstrated the ability to resist the accumulation of fouling on its outer surface. Understanding the functional mechanism employed by nature represents a significant opportunity for the persistent challenges of many industrial and consumer applications. Using a biomimetic approach, this study investigates the underlying hydrodynamic mechanisms of fouling resistance through Large Eddy simulations of a turbulent boundary layer above a novel ribletted surface topography bio-inspired by the Dosinia juvenilis. The results indicate a maximum drag reduction of 6.8% relative to a flat surface. The flow statistics near the surface are analogous to those observed for other ribletted surfaces in that the appropriately sized riblets effectively reduce the spanwise and wall-normal velocity fluctuations near the surface. This study supports the understanding that nature employs ribletted surfaces toward multiple functionalities including the considered drag reduction and fouling resistance.

A new sampling device for metabarcoding surveillance of port communities and detection of non-indigenous species

Metabarcoding techniques are revolutionizing studies of marine biodiversity. They can be used for monitoring non-indigenous species (NIS) in ports and harbors. However, they are often biased by inconsistent sampling methods and incomplete reference databases. Logistic constraints in ports prompt the development of simple, easy-to-deploy samplers. We tested a new device called polyamide mesh for ports organismal monitoring (POMPOM) with a high surface-to-volume ratio. POMPOMS were deployed inside a fishing and recreational port in the Mediterranean alongside conventional settlement plates. We also compiled a curated database with cytochrome oxidase (COI) sequences of Mediterranean NIS. COI metabarcoding of the communities settled in the POMPOMs captured a similar biodiversity than settlement plates, with shared molecular operational units (MOTUs) representing ca. 99% of reads. 38 NIS were detected in the port accounting for ca. 26% of reads. POMPOMs were easy to deploy and handle and provide an efficient method for NIS surveillance.

Development of Antifouling Strategies for Marine Applications

Marine biofouling is an undeniable challenge for aquatic systems since it is responsible for several environmental and ecological problems and economic losses. Several strategies have been developed to mitigate fouling-related issues in marine environments, including developing marine coatings using nanotechnology and biomimetic models, and incorporating natural compounds, peptides, bacteriophages, or specific enzymes on surfaces. The advantages and limitations of these strategies are discussed in this review, and the development of novel surfaces and coatings is highlighted. The performance of these novel antibiofilm coatings is currently tested by in vitro experiments, which should try to mimic real conditions in the best way, and/or by in situ tests through the immersion of surfaces in marine environments. Both forms present their advantages and limitations, and these factors should be considered when the performance of a novel marine coating requires evaluation and validation. Despite all the advances and improvements against marine biofouling, progress toward an ideal operational strategy has been slow given the increasingly demanding regulatory requirements. Recent developments in self-polishing copolymers and fouling-release coatings have yielded promising results which set the basis for the development of more efficient and eco-friendly antifouling strategies.

Distribution of Freshwater Alien Animal Species in Morocco: Current Knowledge and Management Issues

This work presents currently available knowledge on alien species (AS) found in the inland waters of Morocco. The objective is to provide an updated list of alien species and identify the main introduction pathways and possible threats to native biodiversity. The dataset was built from an extensive literature search supplemented by our own research work (published or in progress). The main areas harboring xenodiversity in Moroccan freshwaters correspond to protected areas (e.g., Ramsar Site and SIBE). These areas are currently home to 41 confirmed AS belonging to different taxonomic groups. Fish are the most abundant taxonomic group with 21 species, followed by molluscs (7 species) and arthropods (7 species). The presence of 15 more species was also noticed but considered doubtful. Almost half of these AS were introduced intentionally. They correspond to restocking programs and are likely the most serious threat to native biodiversity through predation, competition, and hybridization. Commercial activities around aquarium and ornamental species appear as the second source favoring colonization by AS. Implementing protective regulations regarding the import of exotic species in Morocco appears very urgent to protect local native diversity. In addition, detecting and monitoring the expansion of AS within the colonized areas and studies improving biological and ecological knowledge seem crucial to mitigate their possible impacts on native communities and preserve Moroccan freshwater ecosystems.

Assessment of the Antibiofilm Performance of Chitosan-Based Surfaces in Marine Environments

Marine biofouling is a natural process often associated with biofilm formation on submerged surfaces, creating a massive economic and ecological burden. Although several antifouling paints have been used to prevent biofouling, growing ecological concerns emphasize the need to develop new and environmentally friendly antifouling approaches such as bio-based coatings. Chitosan (CS) is a natural polymer that has been widely used due to its outstanding biological properties, including non-toxicity and antimicrobial activity. This work aims to produce and characterize poly (lactic acid) (PLA)-CS surfaces with CS of different molecular weight (Mw) at different concentrations for application in marine paints. Loligo opalescens pens, a waste from the fishery industry, were used as a CS source. The antimicrobial activity of the CS and CS-functionalized surfaces was assessed against Cobetia marina, a model proteobacterium for marine biofouling. Results demonstrate that CS targets the bacterial cell membrane, and PLA-CS surfaces were able to reduce the number of culturable cells up to 68% compared to control, with this activity dependent on CS Mw. The antifouling performance was corroborated by Optical Coherence Tomography since PLA-CS surfaces reduced the biofilm thickness by up to 36%, as well as the percentage and size of biofilm empty spaces. Overall, CS coatings showed to be a promising approach to reducing biofouling in marine environments mimicked in this work, contributing to the valorization of fishing waste and encouraging further research on this topic.

Biotic resistance or invasional meltdown? Diversity reduces invasibility but not exotic dominance in southern California epibenthic communities

High community diversity may either prevent or promote the establishment of exotic species. The biotic resistance hypothesis holds that species-rich communities are more resistant to invasion than species-poor communities due to mechanisms including greater interspecific competition. Conversely, the invasional meltdown hypothesis proposes that greater exotic diversity increases invasibility via facilitative interactions between exotic species. To evaluate the degree to which biotic resistance or invasional meltdown influences marine community structure during the assembly period, we studied the development of marine epibenthic “fouling” communities at two southern California harbors. With a focus on sessile epibenthic species, we found that fewer exotic species established as total and exotic richness increased during community assembly and that this effect remained after accounting for space availability. We also found that changes in exotic abundance decreased over time. Throughout the assembly period, gains in exotic abundance were greatest when space was abundant and richness was low. Altogether, we found greater support for biotic resistance than invasional meltdown, suggesting that both native and exotic species contribute to biotic resistance during early development of these communities. However, our results indicate that biotic resistance may not always reduce the eventual dominance of exotic species.

Anthropogenic pressure leads to more introductions: Marine traffic and artificial structures in offshore islands increases non-indigenous species

Anthropogenic pressures such as the introduction of non-indigenous species (NIS) have impacted global biodiversity and ecosystems. Most marine species spreading outside their natural biogeographical limits are promoted and facilitated by maritime traffic through ballast water and hull biofouling. Propagule pressure plays a primary role in invasion success mixed with environmental conditions of the arrival port. Moreover, with the current ocean sprawl, new substrates are offered for potential NIS recruits. Here, differences in the fouling assemblages thriving inside three different ports/marinas facilities in Madeira Island were assessed for comparison. The locations showed significant differences concerning assemblage structure. Most NIS were detected in plastic floating pontoons. Funchal harbour receives most of the marine traffic in Madeira, acting as the main hub for primary NIS introductions, being recreational boating involved in NIS secondary transfers. Our results highlight the need for future management actions in island ecosystems, particularly monitoring and sampling of recreational boating.

Ship traffic connects Antarctica's fragile coasts to worldwide ecosystems

Ship movements related to fishing, tourism, research, and supply expose the Antarctic continent to human impacts. Until now, only rough estimates or industry-specific information have been available to inform evidence-based policy to mitigate the introduction of nonnative marine species. Antarctica’s Southern Ocean supports a unique biota and represents the only global marine region without any known biological invasions. However, climate change is removing physiological barriers to potential invasive nonnative species and increasing ship activities are raising propagule pressure. The successful conservation of iconic Antarctic species and environments relies on addressing both climate change and direct, localized human impact. We have identified high-risk areas for introduced species and provide essential data that will underpin better evidence-based management in the region.

Antarctica, an isolated and long considered pristine wilderness, is becoming increasingly exposed to the negative effects of ship-borne human activity, and especially the introduction of invasive species. Here, we provide a comprehensive quantitative analysis of ship movements into Antarctic waters and a spatially explicit assessment of introduction risk for nonnative marine species in all Antarctic waters. We show that vessels traverse Antarctica’s isolating natural barriers, connecting it directly via an extensive network of ship activity to all global regions, especially South Atlantic and European ports. Ship visits are more than seven times higher to the Antarctic Peninsula (especially east of Anvers Island) and the South Shetland Islands than elsewhere around Antarctica, together accounting for 88% of visits to Southern Ocean ecoregions. Contrary to expectations, we show that while the five recognized “Antarctic Gateway cities” are important last ports of call, especially for research and tourism vessels, an additional 53 ports had vessels directly departing to Antarctica from 2014 to 2018. We identify ports outside Antarctica where biosecurity interventions could be most effectively implemented and the most vulnerable Antarctic locations where monitoring programs for high-risk invaders should be established.

Harbour type and use destination shape fouling community and non-indigenous species assemblage: A study of three northern Tyrrhenian port systems (Mediterranean Sea)

Fouling communities were studied in three port systems of Northern Tyrrhenian Sea (Western Mediterranean), focusing on the occurrence of non-indigenous species (NIS). For each port system two harbour types (large port and recreational marina) were sampled and, within each large port, fouling samples were collected considering two use destinations (commercial and touristic harbour). Among the 431 taxa identified, forty-two were alien or cryptogenic, four of which were new records for the study area. Harbour type and use destination shaped fouling communities and NIS assemblages, with their relative influence varying among different port systems. High fouling variability was detected within port environments and between different marinas. NIS showed the highest occurrence in large ports, in which the touristic harbour generally hosted the greatest amount. Therefore, the touristic harbours within large ports were identified as susceptible areas for NIS establishment and their possible subsequent spread at local scale through recreational maritime traffic.

Developing a conceptual influence diagram for socio-eco-technical systems analysis of biofouling management in shipping - A Baltic Sea case study

Ship hulls create a vector for the transportation of harmful non-indigenous species (NIS) all over the world. To sustainably prevent NIS introductions, the joint consideration of environmental, economic and social aspects in the search of optimal biofouling management strategies is needed. This article presents a multi-perspective soft systems analysis of the biofouling management problem, based on an extensive literature review and expert knowledge collected in the Baltic Sea area during 2018-2020. The resulting conceptual influence diagram (CID) reveals the multidimensionality of the problem by visualizing the causal relations between the key elements and demonstrating the entanglement of social, ecological and technical aspects. Seen as a boundary object, we suggest the CID can support open dialogue and better risk communication among stakeholders by providing an illustrative and directly applicable starting point for the discussions. It also provides a basis for quantitative management optimization in the future.

The role of artificial habitats on fouling bryozoan fauna in the southwestern Atlantic

Artificial habitats, such as harbours and marinas, are entry doors for the introduction and dispersal of species. Surveys on fouling community in these habitats help to understand preventing environmental impacts and management of invasive species. Thus, a survey on fouling bryozoan fauna was carried out along 17 artificial habitats (eight harbours and nine marinas) from three coastal stretches in Southwestern Atlantic. A total of 55 species were identified, including 13 non-native, 33 cryptogenic and nine native taxa. Only five bryozoan species were found in more than 75% of sampled sites. Our analysis revealed that bryozoan fouling communities in artificial habitats do not vary significantly between commercial and recreational localities. However, we also found that faunal assemblages varied significantly along Brazilian coastal stretches that are distinguished by environmental conditions, such as salinity and temperature.

Unveiling the Antifouling Performance of Different Marine Surfaces and Their Effect on the Development and Structure of Cyanobacterial Biofilms

Since biofilm formation by microfoulers significantly contributes to the fouling process, it is important to evaluate the performance of marine surfaces to prevent biofilm formation, as well as understand their interactions with microfoulers and how these affect biofilm development and structure. In this study, the long-term performance of five surface materials—glass, perspex, polystyrene, epoxy-coated glass, and a silicone hydrogel coating—in inhibiting biofilm formation by cyanobacteria was evaluated. For this purpose, cyanobacterial biofilms were developed under controlled hydrodynamic conditions typically found in marine environments, and the biofilm cell number, wet weight, chlorophyll a content, and biofilm thickness and structure were assessed after 49 days. In order to obtain more insight into the effect of surface properties on biofilm formation, they were characterized concerning their hydrophobicity and roughness. Results demonstrated that silicone hydrogel surfaces were effective in inhibiting cyanobacterial biofilm formation. In fact, biofilms formed on these surfaces showed a lower number of biofilm cells, chlorophyll a content, biofilm thickness, and percentage and size of biofilm empty spaces compared to remaining surfaces. Additionally, our results demonstrated that the surface properties, together with the features of the fouling microorganisms, have a considerable impact on marine biofouling potential.

The association between initial adhesion and cyanobacterial biofilm development

Although laboratory assays provide valuable information about the antifouling effectiveness of marine surfaces and the dynamics of biofilm formation, they may be laborious and time-consuming. This study aimed to determine the potential of short-time adhesion assays to estimate how biofilm development may proceed. The initial adhesion and cyanobacterial biofilm formation were evaluated using glass and polymer epoxy resin surfaces under different hydrodynamic conditions and were compared using linear regression models. For initial adhesion, the polymer epoxy resin surface was significantly associated with a lower number of adhered cells compared with glass (-1.27 × 105 cells.cm-2). Likewise, the number of adhered cells was significantly lower (-1.16 × 105 cells.cm-2) at 185 than at 40 rpm. This tendency was maintained during biofilm development and was supported by the biofilm wet weight, thickness, chlorophyll a content and structure. Results indicated a significant correlation between the number of adhered and biofilm cells (r = 0.800, p < 0.001). Moreover, the number of biofilm cells on day 42 was dependent on the number of adhered cells at the end of the initial adhesion and hydrodynamic conditions (R2 = 0.795, p < 0.001). These findings demonstrate the high potential of initial adhesion assays to estimate marine biofilm development.

Developing New Marine Antifouling Surfaces: Learning from Single-Strain Laboratory Tests

The development of antifouling (AF) technology for marine environments is an area of intense research given the severe economic and ecological effects of marine biofouling. Preliminary data from in vitro assays is frequently used to screen the performance of AF coatings. It is intuitive that microbial composition plays a major role in surface colonization. The rationale behind this study is to investigate whether using a mixed population for the in vitro tests yields substantially different results than using single strains during initial screening. A polymeric coating was tested against single- and dual-species cultures of two common microfouler organisms for 49 days. A bacterium (Pseudoaltermonas tunicata) and a cyanobacterium (Cyanobium sp. LEGE 10375) were used in this study. Linear regression analysis revealed that Cyanobium sp. biofilms were significantly associated with a higher number of cells, wet weight, thickness, and biovolume compared to dual-species biofilms. P. tunicata alone had a biofilm growth kinetics similar to dual-species biofilms, although the P. tunicata–Cyanobium sp. mixture developed less dense and thinner biofilms compared to both single-species biofilms. Cyanobium sp. LEGE 10375 biofilms provided the worst-case scenario, i.e., the conditions that caused higher biofilm amounts on the surface material under test. Therefore, it is likely that assessing the AF performance of new coatings using the most stringent conditions may yield more robust results than using a mixed population, as competition between microfouler organisms may reduce the biofilm formation capacity of the consortium.

Recent Developments in Biomimetic Antifouling Materials: A Review

The term 'biomimetic' might be applied to any material or process that in some way reproduces, mimics, or is otherwise inspired by nature. Also variously termed bionic, bioinspired, biological design, or even green design, the idea of adapting or taking inspiration from a natural solution to solve a modern engineering problem has been of scientific interest since it was first proposed in the 1960s. Since then, the concept that natural materials and nature can provide inspiration for incredible breakthroughs and developments in terms of new technologies and entirely new approaches to solving technological problems has become widely accepted. This is very much evident in the fields of materials science, surface science, and coatings. In this review, we survey recent developments (primarily those within the last decade) in biomimetic approaches to antifouling, self-cleaning, or anti-biofilm technologies. We find that this field continues to mature, and emerging novel, biomimetic technologies are present at multiple stages in the development pipeline, with some becoming commercially available. However, we also note that the rate of commercialization of these technologies appears slow compared to the significant research output within the field.

Effect of surface interactions on the settlement of particles on a sinusoidally corrugated substrate

Naturally-occurring surface topographies abound in nature and endow diverse properties, i.e., superhydrophobicity, adhesion, anti-fouling, self-cleaning, anti-glare, anti-bacterial, and many others. Researchers have attempted to replicate such topographies to create human-made surfaces with desired functionalities. For example, combining the surface topography with judicial chemical composition could provide an effective, non-toxic solution to combat non-specific biofouling. A systematic look at the effect of geometry, modulus, and chemistry on adhesion is warranted. In this work, we use a model system that comprises silica (SiO x ) beads interacting with a substrate made of a commercial polydimethylsiloxane kit (PDMS, Sylgard 184) featuring a sinusoidal topography. To examine the impact of interactions on particle settlement, we functionalize the surfaces of both the PDMS substrate and the SiO x beads with polyacrylic acid (PAA) and polyethyleneimine (PEI), respectively. We also use the PDMS commercial kit coated with liquid glass (LG) to study the effect of the substrate modulus on particle settlement. Substrates with a higher aspect ratio (i.e., amplitude/periodicity) encourage adsorption of particles along the sides of the channel compared with substrates with lower aspect ratio. We employ colloidal probe microscopy to demonstrate the effect of interaction between the substrate and the particle. The interplay among the surface modulus, geometry, and interactions between the surface and the particle governs particle settlement on sinusoidally-corrugated substrates.

Combined Effects of Color and Elastic Modulus on Antifouling Performance: A Study of Graphene Oxide/Silicone Rubber Composite Membranes

Biofouling is a significant maritime problem because the growth of fouling organisms on the hulls of ships leads to very high economic losses every year. Inspired by the soft skins of dolphins, we prepared graphene oxide/silicone rubber composite membranes in this study. These membranes have low surface free energies and adjustable elastic moduli, which are beneficial for preventing biofouling. Diatom attachment studies under static conditions revealed that color has no effect on antifouling behavior, whereas the studies under hydrodynamic conditions revealed that the combined effects of color and elastic modulus determine the antifouling performance. The experimental results are in accordance with the "harmonic motion effect" theory proposed by us, and we also provide a supplement to the theory in this paper. On the basis of the diatom attachment test results, the membrane with 0.36 wt % of graphene oxide showed excellent antifouling performance, and is promising in practical applications. The results confirmed that the graphene oxide and graphene have similar effect to enhance silicone rubber antifouling performance. This study provides important insight for the design of new antifouling coatings; specifically, it indicates that lighter colors and low Young's moduli provide superior performance. In addition, this study provides a reference for the application of graphene oxide as fillers to enhance the composite antifouling performance.

Influence of surface topography attributes on settlement and adhesion of natural and synthetic species

Surface topographies of various sizes, shapes, and spatial organization abound in nature. They endow properties such as super-hydrophobicity, reversible adhesion, anti-fouling, self-cleaning, anti-glare, and anti-bacterial, just to mention a few. Researchers have long attempted to replicate these structures to create artificial surfaces with the functionalities found in nature. In this review, we decompose the attributes of surface topographies into their constituents, namely feature dimensions, geometry, and stiffness, and examine how they contribute (individually or collectively) to settlement and adhesion of natural organisms and synthetic particles on the surface. The size of features that comprise the topography affects the contact area between the particle and surface as well as its adhesion and contributes to the observed adsorptive properties of the surface. The geometry of surface perturbations can also affect the contact area and gives rise to anisotropic particle settlement. Surface topography also affects the local stiffness of the surface and governs the adhesion strength on the surface. Overall, systematically studying attributes of surface topography and elucidating how each of them affects adhesion and settlement of particles will facilitate the design of topographically-corrugated surfaces with desired adsorption characteristics.

Role of commercial harbours and recreational marinas in the spread of non-indigenous fouling species

The role of commercial harbours as sink and source habitats for non-indigenous species (NIS) and the role of recreational boating for their secondary spread were investigated by analysing the fouling community of five Italian harbours and five marinas in the western Mediterranean Sea. It was first hypothesised that NIS assemblages in the recreational marinas were subsets of those occurring in commercial harbours. However, the data did not consistently support this hypothesis: the NIS pools of some marinas significantly diverged from harbours even belonging to the same coastal stretches, including NIS occurring only in marinas. This study confirms harbours as hotspots for marine NIS, but also reveals that numbers of NIS in some marinas is higher than expected, suggesting that recreational vessels effectively facilitate NIS spread. It is recommended that this vector of NIS introduction is taken into account in the future planning of sustainable development of maritime tourism in Europe.

Microsatellite evidence of dispersal mechanism of red swamp crayfish (Procambarus clarkii) in the Pearl River basin and implications for its management

Discerning the dispersal patterns of invasive species is critically important for the design of effective management strategies and the development of appropriate theoretical models predicting the spatial expansion of introduced populations. Post-introduction dispersal may occur naturally or via human transport, but for many organisms, assessing the relative contribution of each of these factors is difficult using traditional methods. Here, we explored the genetic patterns associated with the spread of red swamp crayfish (Procambarus clarkii) among 21 populations in the Pearl River basin and 2 peripheral populations in the Yangtze River basin. We found the genetic diversity of P. clarkii in the Pearl River basin was somewhat lower than in the Yangtze River basin. We also found (1) there was significant genetic differentiation between populations, (2) genetic differentiation was not related to geographic distance (i.e., isolation by distance), and (3) a Bayesian assignment analysis revealed three distinct genetic clusters and genetic admixture. Our results therefore provide evidence that human-mediated multiple introductions occurred in the Pearl River basin. Anthropogenic activities such as commercial transportation were likely responsible for the long-distance dispersal of P. clarkii. This study provides useful information for developing management strategies.