Selective pattern of cancer cell accumulation and growth using UV modulating printing of hydrogels

Engineering Biological Tissues from the Bottom-Up: Recent Advances and Future Prospects

Tissue engineering provides a powerful solution for current organ shortages, and researchers have cultured blood vessels, heart tissues, and bone tissues in vitro. However, traditional top-down tissue engineering has suffered two challenges: vascularization and reconfigurability of functional units. With the continuous development of micro-nano technology and biomaterial technology, bottom-up tissue engineering as a promising approach for organ and tissue modular reconstruction has gradually developed. In this article, relevant advances in living blocks fabrication and assembly techniques for creation of higher-order bioarchitectures are described. After a critical overview of this technology, a discussion of practical challenges is provided, and future development prospects are proposed.

Advances in Micro/Nanoporous Membranes for Biomedical Engineering

Porous membrane materials at the micro/nanoscale have exhibited practical and potential value for extensive biological and medical applications associated with filtration and isolation, cell separation and sorting, micro-arrangement, in-vitro tissue reconstruction, high-throughput manipulation and analysis, and real-time sensing. Herein, an overview of technological development of micro/nanoporous membranes (M/N-PMs) is provided. Various membrane types and the progress documented in membrane fabrication techniques, including the electrochemical-etching, laser-based technology, microcontact printing, electron beam lithography, imprinting, capillary force lithography, spin coating, and microfluidic molding are described. Their key features, achievements, and limitations associated with micro/nanoporous membrane (M/N-PM) preparation are discussed. The recently popularized applications of M/N-PMs in biomedical engineering involving the separation of cells and biomolecules, bioparticle operations, biomimicking, micropatterning, bioassay, and biosensing are explored too. Finally, the challenges that need to be overcome for M/N-PM fabrication and future applications are highlighted.

Grayscale surface patterning using electrophoretic motion through a heterogeneous hydrogel material

Chemical surface patterning can be an incredibly powerful tool in a variety of applications, as it enables precise spatial control over surface properties. But the equipment required to create functional surface patterns-especially "grayscale" patterns where independent control over species placement and density are needed-is often expensive and inaccessible. In this work, we leveraged equipment and methods readily available to many research labs, namely 3D printing and electroblotting, to generate controlled grayscale surface patterns. Three-dimensional-printed molds were used to cast polyacrylamide hydrogels with regions of variable polymer density; regions of low polymer density within the hydrogels served as reservoirs for proteins that were later driven onto a target surface using electrophoresis. This mechanism was used to deposit grayscale patterns of fluorescently labeled proteins, and the fluorescent intensity of these patterns was measured and compared to a theoretical analysis of the deposition mechanism.

Facile Method for Fabricating Microfluidic Chip Integrated with Microwell Arrays for Cell Trapping

With the development of biomedical technology, personalized diagnosis and treatment at the single-cell level are becoming more important in the medical field. As one of the most powerful tools, microfluidic chips have shown significant potential for various applications related to cell separation, cell proliferation, and cell behavior analysis. However, fabricating microfluidic devices requires complicated procedures and high-cost equipment. In this study, an optofluidic maskless lithography method was proposed for rapid fabrication of microfluidic devices integrated with microwells. Through the use of this approach, microwells can be on-line designed and the exposure patterns can be modulated. Single or multi polystyrene microspheres were successfully trapped by using the designed microwells. The capture of MCF-7 cells and cell arrays indicated that the microfluidic devices fabricated in the present study can be applied for cell research.

Development of Multi-Dimensional Cell Co-Culture via a Novel Microfluidic Chip Fabricated by DMD-Based Optical Projection Lithography

Establishing a physiological microenvironment in vitro that is suitable for cell and tissue growth is essential for medical research. Microfluidic chips are widely used in the construction of a microenvironment and the analysis of cell behavior in vitro; however, the design and manufacture of microfluidic chips for the long-term culture of a tumor model tends to be highly complex and time-consuming. In this paper, we propose a method for the rapid fabrication of a microfluidic chip for multi-dimensional cell co-culture. A major advantage of this method is that the microfluidic chip can be divided into several sections by micro-pillar arrays to form different functional regions to grow two- and three-dimensional cell culture on the same matrix. At the micro-scale, the surface tension between the gelatin methacryloyl-encapsulated cells and micro-pillars prevents the leakage of the hydrogel, and the hydrogel provides a three-dimensional microenvironment for cell growth. Our results of long-term cell culture and preclinical drug screening showed that cells cultured in a two-dimensional monolayer differ from three-dimensional cultured cells in terms of morphology, area, survival rate, proliferation, and drug resistance. This method shows potential for use in the study of cell behavior, drug screening, and tissue engineering.

3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling

3D bioprinting is emerging as a promising technology for fabricating complex tissue constructs with tailored biological components and mechanical properties. Recent advances have enabled scientists to precisely position materials and cells to build functional tissue models for in vitro drug screening and disease modeling. This review presents state-of-the-art 3D bioprinting techniques and discusses the choice of cell source and biomaterials for building functional tissue models that can be used for personalized drug screening and disease modeling. In particular, we focus on 3D-bioprinted liver models, cardiac tissues, vascularized constructs, and cancer models for their promising applications in medical research, drug discovery, toxicology, and other pre-clinical studies.

Mask-free fabrication of a versatile microwell chip for multidimensional cellular analysis and drug screening

Cells are frequently studied because they are basic structural, functional, and biological units of living organisms. Extracting features from cellular behaviors can facilitate decision making in medical diagnoses and represents an important aspect in the development of biomedical engineering. Previous studies have just focused on either the individual cell or cell clusters separately, which leads to a great lack of information. Microwell technologies could address the challenges of in vitro cellular studies, from individual cell studies to 3D functional assays, by providing more information from smaller sample volumes and enabling the incorporation of low-cost high-throughput assays in the drug discovery process. To this end, the present study describes an easy-to-use method for fabricating a versatile microwell chip that utilizes a digital micro-mirror device printing system, and the chip can be employed in multidimensional cellular analysis, ranging from the single cell to the 3D spheroid level. The microwell manufacturing process, using a digital mask in place of a conventional physical mask, is based on shadowed light and is full of flexibility. Three different dimensions (single cell (1D), cell monolayer (2D) and cell spheroid (3D)) of one cell type can be formed using a microwell array and the analyses of biological characteristics are achieved separately. Single cells and cell clusters can be controlled via customized geometries of microfabricated selectively adhesive poly(ethylene glycol) diacrylate (PEGDA) wells. The effects of shape on cellular growth and hybrid tissue layers were investigated by peeling off the microwells. Furthermore, 3D multicellular spheroids were successfully established in a controllable and high-throughput format. Preclinical drug screening was investigated and distinct differences were observed in the tolerance response to drug testing between the 2D and 3D conditions. The study results further demonstrate that the high-density microwell chip is an easy-to-use multidimensional cellular analysis and rapid drug screening technique, and it could be easily adapted for a wide range of biological research applications.

Differentiation potential of human adipose stem cells bioprinted with hyaluronic acid/gelatin-based bioink through microextrusion and visible light-initiated crosslinking

Bioprinting has a great potential to fabricate three-dimensional (3D) functional tissues and organs. In particular, the technique enables fabrication of 3D constructs containing stem cells while maintaining cell proliferation and differentiation abilities, which is believed to be promising in the fields of tissue engineering and regenerative medicine. We aimed to demonstrate the utility of the bioprinting technique to create hydrogel constructs consisting of hyaluronic acid (HA) and gelatin derivatives through irradiation by visible light to fabricate 3D constructs containing human adipose stem cells (hADSCs). The hydrogel was obtained from a solution of HA and gelatin derivatives possessing phenolic hydroxyl moieties in the presence of ruthenium(II) tris-bipyridyl dication and sodium ammonium persulfate. hADSCs enclosed in the bioprinted hydrogel construct elongated and proliferated in the hydrogel. In addition, their differentiation potential was confirmed by examining the expression of pluripotency marker genes and cell surface marker proteins, and differentiation to adipocytes in adipogenic differentiation medium. Our results demonstrate the great potential of the bioprinting method and the resultant hADSC-laden HA/gelatin constructs for applications in tissue engineering and regenerative medicine.