A Radial Pillar Device (RAPID) for continuous and high-throughput separation of multi-sized particles

Toward Personalized Nanomedicine: The Critical Evaluation of Micro and Nanodevices for Cancer Biomarker Analysis in Liquid Biopsy

Liquid biopsy for the analysis of circulating cancer biomarkers (CBs) is a major advancement toward the early detection of cancer. In comparison to tissue biopsy techniques, liquid biopsy is relatively painless, offering multiple sampling opportunities across easily accessible bodily fluids such as blood, urine, and saliva. Liquid biopsy is also relatively inexpensive and simple, avoiding the requirement for specialized laboratory equipment or trained medical staff. Major advances in the field of liquid biopsy are attributed largely to developments in nanotechnology and microfabrication that enables the creation of highly precise chip-based platforms. These devices can overcome detection limitations of an individual biomarker by detecting multiple markers simultaneously on the same chip, or by featuring integrated and combined target separation techniques. In this review, the major advances in the field of portable and semi-portable micro, nano, and multiplexed platforms for CB detection for the early diagnosis of cancer are highlighted. A comparative discussion is also provided, noting merits and drawbacks of the platforms, especially in terms of portability. Finally, key challenges toward device portability and possible solutions, as well as discussing the future direction of the field are highlighted.

Recent advancements in microfluidics that integrate electrical sensors for whole blood analysis

Whole blood analysis reveals crucial information about various physiological and pathological conditions, including cancer metastasis, infection, and immune status, among others. Despite this rich information, the complex composition of whole blood usually required multiple sample preparation steps to purify targeted analytes. Traditionally, whole blood preparation processes, including centrifugation, lysis, dilution, or staining, are usually manually operated by well-trained technicians using bench-top instruments. This preparation can require a large blood volume and cannot be directly integrated with detection systems. Recently, various studies have integrated microfluidics with electrical sensors for whole blood analysis, with a focus on cell-based analysis, such as cell type, number, morphology, phenotype, and secreted molecules. These miniaturized systems require less sample and shorter reaction times. Besides, the sample processing and analysis can be fully integrated and automated with minimal operations. We believe these systems can transfer the current whole blood analysis from hospitals or laboratories into clinics or home settings to enable real-time and continuous health condition monitoring in point-of-care settings.

Detection of Rare Objects by Flow Cytometry: Imaging, Cell Sorting, and Deep Learning Approaches

Flow cytometry nowadays is among the main working instruments in modern biology paving the way for clinics to provide early, quick, and reliable diagnostics of many blood-related diseases. The major problem for clinical applications is the detection of rare pathogenic objects in patient blood. These objects can be circulating tumor cells, very rare during the early stages of cancer development, various microorganisms and parasites in the blood during acute blood infections. All of these rare diagnostic objects can be detected and identified very rapidly to save a patient's life. This review outlines the main techniques of visualization of rare objects in the blood flow, methods for extraction of such objects from the blood flow for further investigations and new approaches to identify the objects automatically with the modern deep learning methods.

Multiscale 3D-printing of microfluidic AFM cantilevers

Microfluidic atomic force microscopy (AFM) cantilever probes have all the functionalities of a standard AFM cantilever along with fluid pipetting. They have a channel inside the cantilever and an aperture at the tip. Such probes are useful for precise fluid manipulation at a desired location, for example near or inside cells. They are typically made by complex microfabrication process steps, resulting in expensive probes. Here, we used two different 3D additive manufacturing techniques, stereolithography and two-photon polymerization, to directly print ready-to-use microfluidic AFM cantilever probes. This approach has considerably reduced the fabrication time and increased the design freedom. One of the probes, 564 μm long, 30 μm wide, 30 μm high, with a 25 μm diameter channel and 2.5 μm wall thickness had a spring constant of 3.7 N m^-1 and the polymer fabrication material had an elastic modulus of 4.2 GPa. Using these 3D printed probes, AFM imaging of a surface, puncturing of the cell membrane, and aspiration at the single cell level have been demonstrated.

Functional, UV-curable coating for the capture of circulating tumor cells

The capture of circulating tumor cells (CTCs) plays a crucial role in the early diagnosis, personalized treatment and postoperative evaluation of malignant tumors. In this study, UV-curable coating technology was combined with antibody immobilization to enable CTC captures on poly(methyl methacrylate) (PMMA) substrates. Controlled amounts of carboxyl groups and polyethylene glycol (PEG) segments were introduced into the coating formulation to facilitate immobilization of antibodies and block non-specific protein adsorption, respectively. Then, anti-EpCAM antibodies were immobilized on functionalized, coated PMMA substrates by EDC/NHS chemistry. Multiple physical, chemical and biological properties were investigated, including hydrophilicity, protein adsorption, platelet adhesion and anticoagulant properties. Thereafter, optimized coatings were applied on the inner wall of PMMA tubes, followed by immobilization of anti-EpCAM antibodies. After perfusion of the tubes with whole blood, enriched with SGC7901 gastric cancer cells that overexpress EpCAM antigens, rapid and efficient capture of the tumor cells was observed. These results provide a basis for further development of devices for the selective capture and enrichment of CTCs, using small blood volumes.

Clogging-free continuous operation with whole blood in a radial pillar device (RAPID)

Pillar-based passive microfluidic devices combine the advantages of simple designs, small device footprint, and high selectivity for size-based separation of blood cells. Most of these device designs have been validated with dilute blood samples. Handling whole blood in pillar-based devices is extremely challenging due to clogging. The high proportion of cells (particularly red blood cells) in blood, the varying sizes and stiffness of the different blood cells, and the tendency of the cells to aggregate lead to clogging of the pillars within a short period. We recently reported a ra dial pi llar d evice (RAPID) design for continuous and high throughput separation of multi-sized rigid polystyrene particles in a single experiment. In the current manuscript, we have given detailed guidelines to modify the design of RAPID for any application with deformable objects (e.g. cells). We have adapted RAPID to work with whole blood without any pre-processing steps. We were successful in operating the device with whole blood for almost 6 h, which is difficult to achieve with most pillar-based devices. The availability of multiple parallel paths for the cells and the provision for a self-generating cross flow in the device design were the main reasons behind the minimal clogging in our device. We also observed that a vibrator motor attached to the inlet tubing occasionally disturbed the cell clumps. As an illustration of the improved device design, we demonstrated up to ∼ 60-fold enrichment of platelets.