Immortalised human mesenchymal stem cells undergo chondrogenic differentiation in alginate and PGA/PLLA scaffolds

Mesenchymal stem cell-based nanoparticles and scaffolds in regenerative medicine

Mesenchymal stem cells (MSCs) are adult stem cells owing to their regenerative potential and multilineage potency. MSCs have wide-scale applications either in their native cellular form or in conjugation with specific biomaterials as nanocomposites. Majorly, these natural or synthetic biomaterials are being used in the form of metallic and non-metallic nanoparticles (NPs) to encapsulate MSCs within hydrogels like alginate or chitosan or drug cargo loading into MSCs. In contrast, nanofibers of polymer scaffolds such as polycaprolactone (PCL), poly-lactic-co-glycolic acid (PLGA), poly-L-lactic acid (PLLA), silk fibroin, collagen, chitosan, alginate, hyaluronic acid (HA), and cellulose are used to support or grow MSCs directly on it. These MSCs based nanotherapies have application in multiple domains of biomedicine including wound healing, bone and cartilage engineering, cardiac disorders, and neurological disorders. This study focused on current approaches of MSCs-based therapies and has been divided into two major sections. The first section elaborates on MSC-based nano-therapies and their plausible applications including exosome engineering and NPs encapsulation. The following section focuses on the various MSC-based scaffold approaches in tissue engineering. Conclusively, this review mainly focused on MSC-based nanocomposite's current approaches and compared their advantages and limitations for building effective regenerative medicines.

Highly porous novel chondro-instructive bioactive glass scaffolds tailored for cartilage tissue engineering

Cartilage injuries remain challenging since the regenerative capacity of cartilage is extremely low. The aim was to design a novel type of bioactive glass (BG) scaffold with suitable topology that allows the formation of cartilage-specific extracellular matrix (ECM) after colonization with chondrogenic cells for cartilage repair. Highly porous scaffolds with interconnecting pores consisting of 100 % BG were manufactured using a melting, milling, sintering and leaching technique. Scaffolds were colonized with porcine articular chondrocytes (pAC) and undifferentiated human mesenchymal stromal cells (hMSC) for up to 35 days. Scaffolds displayed high cytocompatibility with no major pH shift. Scanning electron microscopy revealed the intimate pAC-scaffold interaction with typical cell morphology. After 14 days MSCs formed cell clusters but still expressed cartilage markers. Both cell types showed aggrecan, SOX9 gene and protein expression, cartilage proteoglycan and sulfated glycosaminoglycan synthesis for the whole culture time. Despite type II collagen gene expression could not anymore be detected at day 35, protein synthesis was visualized for both cell types during the whole culturing period, increasing in pAC and declining after day 14 in hMSC cultures. The novel BG scaffold was stable, cytocompatible and cartilage-specific protein synthesis indicated maintenance of pAC's differentiated phenotype and chondro-instructive effects on hMSCs.

Generation of Mesenchymal Cell Lines Derived from Aged Donors

Background: Mesenchymal stromal cells (MSCs) have the capacity for self-renewal and multi-differentiation, and for this reason they are considered a potential cellular source in regenerative medicine of cartilage and bone. However, research on this field is impaired by the predisposition of primary MSCs to senescence during culture expansion. Therefore, the aim of this study was to generate and characterize immortalized MSC (iMSC) lines from aged donors. Methods: Primary MSCs were immortalized by transduction of simian virus 40 large T antigen (SV40LT) and human telomerase reverse transcriptase (hTERT). Proliferation, senescence, phenotype and multi-differentiation potential of the resulting iMSC lines were analyzed. Results: MSCs proliferate faster than primary MSCs, overcome senescence and are phenotypically similar to primary MSCs. Nevertheless, their multi-differentiation potential is unbalanced towards the osteogenic lineage. There are no clear differences between osteoarthritis (OA) and non-OA iMSCs in terms of proliferation, senescence, phenotype or differentiation potential. Conclusions: Primary MSCs obtained from elderly patients can be immortalized by transduction of SV40LT and hTERT. The high osteogenic potential of iMSCs converts them into an excellent cellular source to take part in in vitro models to study bone tissue engineering.

Collagen and the effect of poly-l-lactic acid based materials on its synthesis

Collagen is an important protein in various biological functions such as providing elasticity and waterproofing to the skin, structural stability to the cells in connective tissues (e.g. tendons, and bone) and stabilisation of atherosclerotic plaques. Collagen as a peptide with a peculiar triple helical structure is majorly composed of glycine and proline amino acids and is synthesised by fibroblasts via intracellular and extracellular mechanisms. Collagen plays an important role in wound healing, bone repair and plaque build-up during atherosclerosis. Various factors such as interleukins, insulin-like growth factor-I, nicotine, and glucose have been shown to influence collagen synthesis. This paper provides an overview of collagen structure, synthesis mechanisms, and the parameters that stimulate those mechanisms. Poly-l-lactic acid as a well-known biocompatible and biodegradable polymer has proved to stimulate collagen synthesis in various physical forms. As such, in this review special emphasis is laid on the effects of poly-l-lactic acid as well as its mechanism of action on collagen synthesis.

Mechanical Stimulation and Diameter of Fiber Scaffolds Affect the Differentiation of Rabbit Annulus Fibrous Stem Cells

BACKGROUND

Degeneration of the annulus fibrosus (AF), an important structure of the intervertebral disc, is one of the main causes of degenerative disc disease. Fabrication of scaffolds replicating the stratified microstructure of the AF is critical for the successful regeneration of AF.

METHODS

In this study, we cultured rabbit AF-derived stem cells (AFSCs) using fabricated electrospun fibrous poly-L-lactic acid scaffolds with different diameters. We applied cyclic tensile strain (CTS) on the scaffolds to regulate the differentiation of AFSCs into specific cell types that resided at the inner, middle, and outer zones of the AF.

RESULTS

We found that the morphologies of AFSCs on the smaller-fiber-diameter scaffolds were nearly round, whereas spindle-like cells morphologies were observed on large-diameter scaffolds. CTS enhanced these phenomena and made the cells slender. The expression levels of collagen-I in cells increased as a function of the fiber diameter, whereas collagen-II and aggrecan exhibited opposite trends. Moreover, the application of CTS upregulated the gene expressions of collagen-I, collagen-II, and aggrecan.

CONCLUSION

Overlaying the scaffolds with different CTS-stimulated cells could eventually lead to engineered AF tissues with hierarchical structures that approximated the native AF tissue. Thus, the proposed methodologies could be potentially applied for AF regeneration.

3D Extracellular Matrix Mimics: Fundamental Concepts and Role of Materials Chemistry to Influence Stem Cell Fate

Synthetic 3D extracellular matrices (ECMs) find application in cell studies, regenerative medicine, and drug discovery. While cells cultured in a monolayer may exhibit unnatural behavior and develop very different phenotypes and genotypes than in vivo, great efforts in materials chemistry have been devoted to reproducing in vitro behavior in in vivo cell microenvironments. This requires fine-tuning the biochemical and structural actors in synthetic ECMs. This review will present the fundamentals of the ECM, cover the chemical and structural features of the scaffolds used to generate ECM mimics, discuss the nature of the signaling biomolecules required and exploited to generate bioresponsive cell microenvironments able to induce a specific cell fate, and highlight the synthetic strategies involved in creating functional 3D ECM mimics.

Usefulness of Mesenchymal Cell Lines for Bone and Cartilage Regeneration Research

The unavailability of sufficient numbers of human primary cells is a major roadblock for in vitro repair of bone and/or cartilage, and for performing disease modelling experiments. Immortalized mesenchymal stromal cells (iMSCs) may be employed as a research tool for avoiding these problems. The purpose of this review was to revise the available literature on the characteristics of the iMSC lines, paying special attention to the maintenance of the phenotype of the primary cells from which they were derived, and whether they are effectively useful for in vitro disease modeling and cell therapy purposes. This review was performed by searching on Web of Science, Scopus, and PubMed databases from 1 January 2015 to 30 September 2019. The keywords used were ALL = (mesenchymal AND ("cell line" OR immortal*) AND (cartilage OR chondrogenesis OR bone OR osteogenesis) AND human). Only original research studies in which a human iMSC line was employed for osteogenesis or chondrogenesis experiments were included. After describing the success of the immortalization protocol, we focused on the iMSCs maintenance of the parental phenotype and multipotency. According to the literature revised, it seems that the maintenance of these characteristics is not guaranteed by immortalization, and that careful selection and validation of clones with particular characteristics is necessary for taking advantage of the full potential of iMSC to be employed in bone and cartilage-related research.

Influence of hydrogel network microstructures on mesenchymal stem cell chondrogenesis in vitro and in vivo

Hydrogels, which provide three-dimensional (3D) niches for encapsulating bone marrow mesenchymal stem cells (BMSCs), are becoming a promising tissue engineering solution for chondrogenic differentiation of BMSCs. However, it remains a challenge to design a hydrogel material for effective chondrogenesis of BMSCs because of the complexity of cartilage ECM and cell-matrix interactions. Thus far, various studies have shown the physical-chemical cues of hydrogel materials to impact BMSCs chondrogenesis, but the design of the 3D network microstructure of the hydrogel to induce BMSCs chondrogenesis is still far from optimized. In this study, we successfully prepared two types of collagen hydrogels, namely, the fibrous network and porous network, with the same chemical composition and similar mechanical strength but with two distinct network microstructures. The two different network microstructures significantly influenced mass transfer, protein adsorption, degradability, and contraction of the collagen hydrogels. Moreover, the cells presented distinct proliferation and morphology in the two hydrogels, which consequently modulated chondrogenic differentiation of BMSCs derived from rat. Collagen hydrogels with a fibrous network promoted more chondrogenic differentiation of BMSCs without additional growth factors in vitro and subcutaneous implantation in vivo than those with a porous network. Moreover, fibrous network resulted in less ECM calcification than porous network. However, the fibrous network could not prevent hypertrophy of the chondrogenic cells induced by BMSCs. Overall, these results revealed that the 3D network microstructure of a hydrogel was a key design parameter for the chondrogenic differentiation of BMSCs. STATEMENT OF SIGNIFICANCE: Hydrogels had been used to induce the chondrogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in cartilage tissue engineering, but the key design parameters remain unoptimized. This was mainly due to the different material properties including composition, strength, and microstructure, which would interplay with each other and result in difficulties to investigate the effects for one factor. In this study, we fabricated two collagen hydrogels with the same chemical composition and mechanical strength, but two distinct network microstructures. The effects of the two network microstructures on the chondrogenic differentiation of BMSCs were investigated by in vitro and in vivo assays. The results highlight the effects of network microstructures and provide important information about optimizing the design of future hydrogels in cartilage tissue engineering.

A prospect of cell immortalization combined with matrix microenvironmental optimization strategy for tissue engineering and regeneration

Cellular senescence is a major hurdle for primary cell-based tissue engineering and regenerative medicine. Telomere erosion, oxidative stress, the expression of oncogenes and the loss of tumor suppressor genes all may account for the cellular senescence process with the involvement of various signaling pathways. To establish immortalized cell lines for research and clinical use, strategies have been applied including internal genomic or external matrix microenvironment modification. Considering the potential risks of malignant transformation and tumorigenesis of genetic manipulation, environmental modification methods, especially the decellularized cell-deposited extracellular matrix (dECM)-based preconditioning strategy, appear to be promising for tissue engineering-aimed cell immortalization. Due to few review articles focusing on this topic, this review provides a summary of cell senescence and immortalization and discusses advantages and limitations of tissue engineering and regeneration with the use of immortalized cells as well as a potential rejuvenation strategy through combination with the dECM approach.

A poly-L-lactic acid/ collagen/glycosaminoglycan matrix for tissue engineering applications

Adhesion of tissue cells to biomaterials is a prerequisite of paramount importance for the effectiveness of a tissue engineering construct (cell and scaffolds). Functionalization of polymeric scaffolds with organic polymers, such as collagen or proteoglycans, is a promising approach in order to improve the cytocompatibility. As a matter of fact, organic polymers, isolated directly from the extracellular matrix, contain a multitude of surface ligand (fibronectin, laminin, vitronectin) and arginine–glycine–aspartic acid-containing peptides that promote cell adhesion. In tissue engineering, the combination of organic and synthetic polymers gives rise to scaffolds characterized simultaneously by the mechanical strength of synthetic materials and the biocompatibility of natural materials. In this work, porous poly-L-lactide acid scaffolds were functionalized with a synthetic collagen–glycosaminoglycans matrix in order to improve cell adhesion. For this purpose, a protocol for collagen–glycosaminoglycans conjugation into the pores of the scaffolds was set up. Moreover, an innovative protocol for the quantification of the conjugated glycosaminoglycans inside the scaffolds was created and adopted. The results have confirmed the effectiveness of the developed protocol: a collagen–glycosaminoglycans conjugation, with an efficiency of about 21% was obtained inside the scaffold. Moreover, SEM analysis highlighted the presence of the homogeneous synthetic matrix into the bulk of porous scaffolds. Finally, cell culture assays carried out by utilizing mouse embryonic fibroblasts showed that cell proliferation on poly-L-lactide acid-collagen–glycosaminoglycans scaffold is higher than on poly-L-lactide acid collagen scaffold (utilized as control). Therefore, it can be stated that the presence of glycosaminoglycans not only increases the mechanical strength of the matrix, thanks to their cross-linking effect, but also it seems to lead to a more significant cell growth. Overall, it is reasonable to state that the concerned protocol may be proposed as a reliable route to increase the rate of proliferation and in some cases to stimulate the cell differentiation in tissue engineering devices.

Effects of a Novel Inoculation Method on Cell Distribution, Mineralization, and Vascularization of Tissue-Engineered Constructs

Objective: Despite some potential advantages, tissue-engineered constructs have low therapeutic efficacy after transplantation into bone defect sites due to uneven distribution of seed cells, which presents a major obstacle in a clinical setting. The aim of this study was to improve cell distribution within the scaffold, to increase seeding efficiency, to facilitate tissue ingrowth and vascularization of the resultant grafts, and finally to boost the successful rate of transplantation. Approach: A syringe-aided inoculation method was designed to anchor bone marrow stromal cells (BMSCs) onto the central pores of the chitosan scaffold by repeat positive aspiration. The cell distribution, cell number, vascularization and mineralization at the central region of the tissue-engineered constructs treated by syringe-aided and regular two-side inoculation methods were evaluated side by side using the WST-8, immunofluorescence staining of CD31 and von Kossa staining. Results: The tissue-engineered constructs treated by the syringe-aided inoculation methods exhibited a larger number of BMSCs with uniform distribution, as well as more robust vascularization and mineralization in the central regions when compared with those treated by the two-side inoculation method both in vitro and in vivo. Innovation: This is the first time that the influence of a syringe-aided inoculation method has been evaluated with respect to the vascularization and mineralization of implanted grafts. Conclusion: The syringe-aided inoculation methods used in this study might provide an approach through which to improve cell distribution within the scaffold, facilitate the subsequent tissue ingrowth into the scaffold, and promote the vascularization and mineralization of tissue-engineered grafts.

Calcium/Cobalt Alginate Beads as Functional Scaffolds for Cartilage Tissue Engineering

Articular cartilage is a highly organized tissue with complex biomechanical properties. However, injuries to the cartilage usually lead to numerous health concerns and often culminate in disabling symptoms, due to the poor intrinsic capacity of this tissue for self-healing. Although various approaches are proposed for the regeneration of cartilage, its repair still represents an enormous challenge for orthopedic surgeons. The field of tissue engineering currently offers some of the most promising strategies for cartilage restoration, in which assorted biomaterials and cell-based therapies are combined to develop new therapeutic regimens for tissue replacement. The current study describes the in vitro behavior of human adipose-derived mesenchymal stem cells (hADSCs) encapsulated within calcium/cobalt (Ca/Co) alginate beads. These novel chondrogenesis-promoting scaffolds take advantage of the synergy between the alginate matrix and Co⁺² ions, without employing costly growth factors (e.g., transforming growth factor betas (TGF-βs) or bone morphogenetic proteins (BMPs)) to direct hADSC differentiation into cartilage-producing chondrocytes.

3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration

Painful degeneration of soft tissues accounts for high socioeconomic costs. Tissue engineering aims to provide biomimetics recapitulating native tissues. Biocompatible thermoplastics for 3D printing can generate high-resolution structures resembling tissue extracellular matrix. Large-pore 3D-printed acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) scaffolds were compared for cell ingrowth, viability, and tissue generation. Primary articular chondrocytes and nucleus pulposus (NP) cells were cultured on ABS and PLA scaffolds for three weeks. Both cell types proliferated well, showed high viability, and produced ample amounts of proteoglycan and collagen type II on both scaffolds. NP generated more matrix than chondrocytes; however, no difference was observed between scaffold types. Mechanical testing revealed sustained scaffold stability. This study demonstrates that chondrocytes and NP cells can proliferate on both ABS and PLA scaffolds printed with a simplistic, inexpensive desktop 3D printer. Moreover, NP cells produced more proteoglycan than chondrocytes, irrespective of thermoplastic type, indicating that cells maintain individual phenotype over the three-week culture period. Future scaffold designs covering larger pore sizes and better mimicking native tissue structure combined with more flexible or resorbable materials may provide implantable constructs with the proper structure, function, and cellularity necessary for potential cartilage and disc tissue repair in vivo.

Investigation of polylactide/poly(ε-caprolactone)/multi-walled carbon nanotubes electrospun nanofibers with surface texture

The surface texture of PLA/PCL nanofibers was caused by the formation of voids and elongation in electric field. The MWCNTs reduced the sizes of PCL phase in PLA matrix.