Effect of dynamic seeding methods on the distribution of fibroblasts within human acellular dermis

Differentiation of human endometrial mesenchymal cells to epithelial and stromal cells by seeding on the decellularized endometrial scaffold

This study aimed to construct the endometrial-like structure by co-culturing of human mesenchymal endometrial cells and uterine smooth muscle cells in the decellularized scaffold. After decellularization of the human endometrium, cell seeding was performed by centrifugation of human mesenchymal endometrial cells with different speeds and times in 15 experimental subgroups. Analysis of residual cell count in suspension was done in all subgroups and the method with the lower number of suspended cells was selected for subsequent study. Then, the human endometrial mesenchymal cells and the myometrial muscle cells were seeded on the decellularized tissue and cultured for 1 wk; then, differentiation of the seeded cells was assessed by morphological and gene expression analysis. The cell seeding method by centrifuging at 6020 g for 2 min showed the highest number of seeded cells and the lowest number of residual cells in suspension. In the recellularized scaffold, the endometrial-like was seen with some protrusions on their surface and the stromal cells had shown spindle and polyhedral morphology. The myometrial cells almost were homed at the periphery of the scaffold and mesenchymal cells penetrated in deeper parts similar to their arrangement in the native uterus. The more expression of endometrial-related genes such as SPP1, MMP2, ZO-1, LAMA2, and COL4A1 and low-level expression of the OCT4 gene as a pluripotency marker confirmed the differentiation of seeded cells. Endometrial-like structures were formed by the co-culturing of human endometrial mesenchymal cells and smooth muscle cells on the decellularized endometrium.

Current Progress in Vascular Engineering and Its Clinical Applications

Coronary heart disease (CHD) is caused by narrowing or blockage of coronary arteries due to atherosclerosis. Coronary artery bypass grafting (CABG) is widely used for the treatment of severe CHD cases. Although autologous vessels are a preferred choice, healthy autologous vessels are not always available; hence there is a demand for tissue engineered vascular grafts (TEVGs) to be used as alternatives. However, producing clinical grade implantable TEVGs that could healthily survive in the host with long-term patency is still a great challenge. There are additional difficulties in producing small diameter (<6 mm) vascular conduits. As a result, there have not been TEVGs that are commercially available. Properties of vascular scaffolds such as tensile strength, thrombogenicity and immunogenicity are key factors that determine the biocompatibility of TEVGs. The source of vascular cells employed to produce TEVGs is a limiting factor for large-scale productions. Advanced technologies including the combined use of natural and biodegradable synthetic materials for scaffolds in conjunction with the use of mesenchyme stem cells or induced pluripotent stem cells (iPSCs) provide promising solutions for vascular tissue engineering. The aim of this review is to provide an update on various aspects in this field and the current status of TEVG clinical applications.

Improved cell seeding efficiency and cell distribution in porous hydroxyapatite scaffolds by semi-dynamic method

Tissue engineering is a promising technique for the repair of bone defects. An efficient and homogeneous distribution of cell seeding into scaffold is a crucial but challenging step in the technique. Murine bone marrow mesenchymal stem cells were seeded into porous hydroxyapatite scaffolds of two morphologies by three methods: static seeding, semi-dynamic seeding, or dynamic perfusion seeding. Seeding efficiency, survival, distribution, and proliferation were quantitatively evaluated. To investigate the performance of the three seeding methods for larger/thicker scaffolds as well as batch seeding of numerous scaffolds, three scaffolds were stacked to form assemblies, and seeding efficiencies and cell distribution were analyzed. The semi-dynamic seeding and static seeding methods produced significantly higher seeding efficiencies, vitalities, and proliferation than did the dynamic perfusion seeding. On the other hand, the semi-dynamic seeding and dynamic perfusion seeding methods resulted in more homogeneous cell distribution than did the static seeding. For stacked scaffold assemblies, the semi-dynamic seeding method also created superior seeding efficiency and longitudinal cell distribution homogeneity. The semi-dynamic seeding method combines the high seeding efficiency of static seeding and satisfactory distribution homogeneity of dynamic seeding while circumventing their disadvantages. It may contribute to improved outcomes of bone tissue engineering.

Introduction of a New Surgical Method to Improve Bone Healing in a Large Bone Defect by Replacement of the Induced Membrane by a Human Decellularized Dermis Repopulated with Bone Marrow Mononuclear Cells in Rat

The Masquelet technique for the treatment of large bone defects is a two-stage procedure based on an induced membrane. We eliminate the first surgical step by using a decellularized dermal skin graft (Epiflex^®) populated with bone marrow mononuclear cells (BMC), as a replacement for the induced membrane. The aim of this study was to demonstrate the feasibility of this technology and provide evidence of equivalent bone healing in comparison to the induced membrane-technique. Therefore, 112 male Sprague–Dawley rats were allocated in six groups and received a 10 mm femoral defect. Defects were treated with either the induced membrane or decellularized dermis, with or without the addition of BMC. Defects were then filled with a scaffold (β-TCP), with or without BMC. After a healing time of eight weeks, femurs were taken for histological, radiological and biomechanical analysis. Defects treated with Epiflex^® showed increased mineralization and bone formation predominantly in the transplanted dermis surrounding the defect. No significant decrease of biomechanical properties was found. Vascularization of the defect could be enhanced by addition of BMC. Considering the dramatic reduction of a patient’s burden by the reduced surgical stress and shortened time of treatment, this technique could have a great impact on clinical practice.

Recombinant Spider Silk Functionalized with a Motif from Fibronectin Mediates Cell Adhesion and Growth on Polymeric Substrates by Entrapping Cells During Self-Assembly

In vitro endothelialization of synthetic grafts or engineered vascular constructs is considered a promising alternative to overcome shortcomings in the availability of autologous vessels and in-graft complications with synthetics. A number of cell-seeding techniques have been implemented to render vascular grafts accessible for cells to attach, proliferate, and spread over the surface area. Nonetheless, seeding efficiency and the time needed for cells to adhere varies dramatically. Herein, we investigated a novel cell-seeding approach (denoted co-seeding) that enables cells to bind to a motif from fibronectin included in a recombinant spider silk protein. Entrapment of cells occurs at the same time as the silk assembles into a nanofibrillar coating on various substrates. Cell adhesion analysis showed that the technique can markedly improve cell-seeding efficiency to nonfunctionalized polystyrene surfaces, as well as establish cell attachment and growth of human dermal microvascular endothelial cells on bare polyethylene terephthalate and polytetrafluoroethylene (PTFE) substrates. Scanning electron microscopy images revealed a uniform endothelial cell layer and cell-substratum compliance with the functionalized silk protein to PTFE surfaces. The co-seeding technique holds a great promise as a method to reliably and quickly cellularize engineered vascular constructs as well as to in vitro endothelialize commercially available cardiovascular grafts.

Establishment of a cell-based wound healing assay for bio-relevant testing of wound therapeutics

INTRODUCTION

Predictive in vitro testing of novel wound therapeutics requires adequate cell-based bio-assays. Such assays represent an integral part during preclinical development as pre-step before entering in vivo studies. Simple "scratch tests" based on defected skin cell monolayers exist, however these can solely be used for testing liquids, as cell monolayer destruction and excessive hydration limit their applicability for (semi-)solid systems like wound dressings. In this context, a cell-based wound healing assay is introduced for rapid and predictive testing of wound therapeutics independent of their physical state in a bio-relevant environment.

METHODS

A novel wound healing assay was established for bio-relevant and predictive testing of (semi-) solid wound therapeutics.

RESULTS

The assay allows for physiologically relevant hydration of the tested wound therapeutics at the air-liquid interface and their removal without cell monolayer disruption. In a proof-of-concept study, the applicability and discriminative power could be demonstrated by examining unloaded and drug-loaded wound dressings with two different established wound healing actives (dexpanthenol and metyrapone) and their effect on skin cell behavior. The influence of the released drug on the cells´ healing behavior could successfully be monitored over time. Wound size assessment after 96h resulted in an eight fold smaller wound area for drug treated models compared to the ones treated with unloaded fibers and non-treated wounds.

DISCUSSION

This assay provides valuable first insights towards the establishment of a valid screening and evaluation tool for preclinical wound therapeutic development from liquid to (semi-)solid systems to improve predictability in a simple, yet standardized way.

Transplanted fibroblasts proliferate in host bronchial tissue and enhance bronchial anastomotic healing in a rodent model

INTRODUCTION

Healing of airway anastomoses after preoperative irradiation can be a significant clinical problem. The augmentation of bronchial anastomoses with a fibroblast-seeded human acellular dermis (hAD) was shown to be beneficial, although the underlying mechanism remained unclear. Therefore, in this study we investigated the fate of the fibroblasts transplanted to the scaffold covering the anastomosis.

MATERIAL AND METHODS

32 Fisher rats underwent surgical anastomosis of the left main bronchus. In a 2 × 2 factorial design, they were randomized to receive preoperative irradiation of 20 Gy and augmentation of the anastomosis with a fibroblast-seeded transplant. Fibroblasts from subcutaneous fat of Fischer-344 rat were transduced retrovirally with tdTomato for cell tracking. After 7 and 14 days, animals were sacrificed and cell concentration of transplanted and nontransplanted fibroblasts in the hAD as well as in the bronchial tissue was measured using RT-PCR.

RESULTS

Migration of transplanted fibroblasts from dermis to bronchus were demonstrated in both groups, irradiated and nonirradiated. In the irradiated groups, there was a cell count of 7 × 104 ± 1 × 104 tomato+-fibroblasts in the bronchial tissue at day 7, rising to 1 × 105 ± 1 × 104 on day 14 (p <0.0001). Tomato+-cell concentration in hAD increased from 6 × 103 ± 1 × 103 at day 7 to 6 × 104 ± 1 × 104 at day 14 (p <0.0001). In the nonirradiated groups, tomato+-cell concentration in bronchus was 4 × 103 ± 1 × 103 on day 7 and 4 × 103 ± 1 × 103 at day 14. In the hAD tomato+ cell concentration rising from 1 × 104 ± 1 × 103 at day 7 to 2 × 104 ± 3 × 103 cells at day 14 (p = 0.0028).

CONCLUSIONS

Transplanted fibroblasts in the irradiated groups proliferate and migrate into the irradiated host bronchial tissue, but not in the nonirradiated groups.

Development of an Effective Cell Seeding Technique: Simulation, Implementation, and Analysis of Contributing Factors

Cell seeding in a biomaterial is an important process for tissue engineering applications. It helps to modulate tissue formation or to control initial conditions for mechanobiological studies. The compression release-induced suction (CRIS) seeding technique leads to active infiltration of the cell suspension toward the central region of the scaffold. Its effectiveness, however, may significantly vary depending on several controlling factors such as the rate of loading and unloading or scaffold architecture. We utilized a 2D axisymmetric finite element model to numerically evaluate the influence of a seeding loading regime on suction pressure and infiltration velocity of the cell suspension. The in vitro application of optimized CRIS seeding obtained from simulation showed significant effectiveness over a static seeding method. As simulation results predicted, the permeability of the scaffold directly influenced CRIS seeding effectiveness in vitro. By supplementing an optimized CRIS loading regime with slow rotation after seeding treatment, cell distribution through thickness was improved especially for scaffolds showing low permeability. Finally, we systematically analyzed the relative importance of permeability, thickness, or coating on cell seeding efficiency and uniformity using a full factorial design of experiments. We observed that permeability has a higher impact on the CRIS seeding than scaffold coating and thickness.

In-vivo quantification of the revascularization of a human acellular dermis seeded with EPCs and MSCs in co-culture with fibroblasts and pericytes in the dorsal chamber model in pre-irradiated tissue

INTRODUCTION

Transplantation of a cell-seeded graft may improve wound healing after radiotherapy. However, the survival of the seeded cells depends on a rapid vascularization of the graft. Co-culturing of adult stem cells may be a promising strategy to accelerate the vessel formation inside the graft. Thus, we compared the in vivo angiogenic potency of mesenchymal stem cells (MSC) and endothelial progenitor cells (EPC) using dorsal skinfold chambers and intravital microscopy.

MATERIALS AND METHODS

Cells were isolated from rat bone marrow and adipose tissue and characterized by immunostaining and flow cytometry. Forty-eight rats received a dorsal skinfold chamber and were divided into 2 main groups, irradiated and non-irradiated. Each of these 2 groups were further subdivided into 4 groups: unseeded matrices, matrices + fibroblasts + pericytes, matrices + fibroblasts + pericytes + MSCs and matrices + fibroblasts + pericytes + EPCs. Vessel densities were quantified semi-automatically using FIJI.

RESULTS

Fibroblasts + pericytes - seeded matrices showed a significantly higher vascular density in all groups with an exception of non-irradiated rats at day 12 compared to unseeded matrices. Co-seeding of MSCs increased vessel densities in both, irradiated and non-irradiated groups. Co-seeding with EPCs did not result in an increase of vascularization in none of the groups.

DISCUSSION

We demonstrated that the pre-radiation treatment led to a significant decreased vascularization of the implanted grafts. The augmentation of the matrices with fibroblasts and pericytes in co-culture increased the vascularization compared to the non-seeded matrices. A further significant enhancement of vessel ingrowth into the matrices could be achieved by the co-seeding with MSCs in both, irradiated and non-irradiated groups.

Methodologies in creating skin substitutes

The creation of skin substitutes has significantly decreased morbidity and mortality of skin wounds. Although there are still a number of disadvantages of currently available skin substitutes, there has been a significant decline in research advances over the past several years in improving these skin substitutes. Clinically most skin substitutes used are acellular and do not use growth factors to assist wound healing, key areas of potential in this field of research. This article discusses the five necessary attributes of an ideal skin substitute. It comprehensively discusses the three major basic components of currently available skin substitutes: scaffold materials, growth factors, and cells, comparing and contrasting what has been used so far. It then examines a variety of techniques in how to incorporate these basic components together to act as a guide for further research in the field to create cellular skin substitutes with better clinical results.