Preservation of corneal stromal lenticule: review

Biologicals and Biomaterials for Corneal Regeneration and Vision Restoration in Limbal Stem Cell Deficiency

The mammalian cornea is decorated with stem cells bestowed with the life-long task of renewing the epithelium, provided they remain healthy, functional, and in sufficient numbers. If not, a debilitating disease known as limbal stem cell deficiency (LSCD) can develop causing blindness. Decades after the first stem cell (SC) therapy is devised to treat this condition, patients continue to suffer unacceptable failures. During this time, improvements to therapeutics have included identifying better markers to isolate robust SC populations and nurturing them on crudely modified biological or biomaterial scaffolds including human amniotic membrane, fibrin, and contact lenses, prior to their delivery. Researchers are now gathering information about the biomolecular and biomechanical properties of the corneal SC niche to decipher what biological and/or synthetic materials can be incorporated into these carriers. Advances in biomedical engineering including electrospinning and 3D bioprinting with surface functionalization and micropatterning, and self-assembly models, have generated a wealth of biocompatible, biodegradable, integrating scaffolds to choose from, some of which are being tested for their SC delivery capacity in the hope of improving clinical outcomes for patients with LSCD.

Lenticule addition keratoplasty for the treatment of keratoconus: A systematic review and critical considerations

Keratoconus is a corneal disorder characterized by the progressive thinning and bulging of the cornea. Currently, the major goal of management is to halt its progression, restore normal corneal strength, prevent acute complications, and save vision. Penetrating keratoplasty and deep anterior lamellar keratoplasty as conventional surgical methods for advanced keratoconus are limited by relatively high rates of immune intolerance, slow post-operational recovery, high costs, and shortage of donor corneas. Recently, the development of lenticule addition keratoplasty enables the restoration of corneal thickness simply by implanting a lenticule into the stromal pocket created with the femtosecond laser, which can originate from cadaver corneas or more appealing, be extracted from patients via a small-incision lenticule extraction (SMILE) surgery. As the first systematic review in this field, we critically review publications on lenticule addition keratoplasty and provide our perspectives on its clinical application and the focus of future research.

Biomechanical changes in keratoconus after customized stromal augmentation

PURPOSE

To verify corneal biomechanical changes, poststromal augmentation using myopic small-incision lenticule extraction's (SMILEs) lenticules in advanced keratoconus (KCN) through Corvis ST (Oculus, Wetzlar, Germany).

MATERIALS AND METHODS

A clinical trial enrolled 22 advanced KCN patients. We implanted lenticules exceeding 100 μ according to a nomogram and evaluated biomechanical factors through Corvis ST at 3-, 6-, and 24-month postimplantation. We examined parameters during the first applanation (A1), second applanation (A2), highest concavity (HC)/max concavity events, and Vinciguerra screening parameters, as recently established criteria derived from the ideal blend of diverse biomechanical and ocular factors and formulated through the application of logistic regression. Regression analyses explored relationships with age, mean keratometry value, thickness, sphere, cylinder, and best-corrected visual acuity.

RESULTS

Patients were well matched for age, intraocular pressure, and central corneal thickness (CCT). The mean spherical equivalent decreased from -13.48 ± 2.86 Diopters (D) to -8.59 ± 2.17 D (P < 0.007), and mean keratometry decreased from 54.68 ± 2.77 D to 51.95 ± 2.21 D (P < 0.006). Significant increases were observed in HC time (HCT), Radius-central curvature radius at the HC state-, peak distance (PD) during HC state, CCT, first applanation time, and stiffness parameter (A1T and SP-A1), whereas HC deformation amplitude, maximum deformation amplitude ratio at 2 mm, Corvis Biomechanical Index (CBI), integrated radius (IR), second applanation deformation amplitude (A2DA), first applanation velocity and deflection amplitude (A1V and A1DeflA) significantly decreased postlenticule implantation. Multivariable regression revealed age positively correlated with SP-A1 (P = 0.003) and negatively with HC delta Arc length (P = 0.007). Mean K positively correlated with CCT (P = 0.05) and negatively with CBI (P = 0.032). Best-corrected visual acuity positively correlated with HCT (P = 0.044), and the cylinder positively correlated with PD (P = 0.05) and CCT (P = 0.05) whereas negatively with IR (P = 0.025).

CONCLUSIONS

Stromal augmentation using myopic SMILE lenticules induces significant corneal biomechanical changes in KCN.

Incisional surface quality of electron-beam irradiated cornea-extracted lenticule for stromal keratophakia: high nJ-energy vs. low nJ-energy femtosecond laser

Introduction

Corneal lenticules can be utilized as an additive material for stromal keratophakia. However, following extraction, they must be reimplanted almost immediately or cryopreserved in lenticule banks. Electron-beam (E-beam) irradiated corneas permit room-temperature storage for up to 2 years, enabling keratophakia to be performed on demand. This study aims to compare the performance of high nano Joule (nJ)-energy (VisuMax) and low nJ-energy (FEMTO LDV) femtosecond laser systems on the thickness consistency and surface quality and collagen morphology of lenticules produced from fresh and E-beamed corneas.

Methods

A total of 24 lenticules with -6.00 dioptre power were cut in fresh human donor corneas and E-beamed corneas with VisuMax and FEMTO LDV. Before extraction, the thickness of the lenticules was measured with anterior segment-optical coherence tomography (AS-OCT). The incisional surface roughness of extracted lenticules was analyzed using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Multiphoton microscopy was then used to assess the surface collagen morphometry.

Results

The E-beamed lenticules that were cut using FEMTO LDV were significantly thicker than the fresh specimens as opposed to those created with VisuMax, which had a similar thickness as the fresh lenticules. On the vertex, they were ∼11% thicker than the fresh lenticules. The surface roughness (Rq) of E-beamed lenticules incised with FEMTO LDV did not differ significantly from the fresh lenticules. This contrasted with the VisuMax-fashioned lenticules, which showed notably smoother surfaces (∼36 and ∼20% lower Rq on anterior and posterior surfaces, respectively) on the E-beamed than the fresh lenticules. The FEMTO LDV induced less cumulative changes to the collagen morphology on the surfaces of both fresh and E-beamed lenticules than the VisuMax.

Conclusion

It has been previously demonstrated that the low nJ-energy FEMTO LDV produced a smoother cutting surface compared to high nJ-energy VisuMax in fresh lenticules. Here, we showed that this effect was also seen in the E-beamed lenticules. In addition, lower laser energy conferred fewer changes to the lenticular surface collagen morphology. The smaller disparity in surface cutting quality and collagen disturbances on the E-beamed lenticules could be beneficial for the early visual recovery of patients who undergo stromal keratophakia.

Comparison of fresh and preserved decellularized human corneal lenticules in femtosecond laser-assisted intrastromal lamellar keratoplasty

Substantial evidence has demonstrated the application of fresh and decellularized human corneal lenticules from increasing myopic surgeries. Further preservation of decellularized corneal lenticules would extend its clinical application. However, whether fresh and preserved decellularized lenticules have the same effects in vivo, including refractive correction, remains unclear. Here, we made comprehensive comparisons between fresh human lenticules (FHLs) and preserved decellularized human lenticules (DHLs). Another group of decellularized lenticules was combined with crosslinking for potential keratoconus therapy. Optical transparency, biomechanical properties, and fibrillar ultrastructure were analyzed to evaluate the DHLs and crosslinked DHLs (cDHLs) in vitro. The DHLs retained high transparency and regular ultrastructure, with genetic materials mostly being eliminated. The strength of lenticules in the cDHL group was markedly increased by crosslinking. Moreover, after storage in glycerol for 3 months, the lenticules were reimplanted into rabbit corneal lamellar pockets assisted by a femtosecond laser. The rabbits were followed for another 3 months. There were no obvious rejective complications in any of the three groups. From 1 week to 3 months postoperatively, the host corneas of the FHL group remained highly transparent, while slight hazes were observed in the DHL group. However, the corneas of the cDHL group displayed opacity throughout the 3-month postoperative period. Furthermore, all the lenticules could effectively induce corneal steepening and refractive changes. Taken together, our data indicated that FHLs are ideal inlay products, whereas preserved DHLs could be an alternative for intrastromal lamellar keratoplasty. Our study provides new insights into the clinical application of human lenticule recycling. STATEMENT OF SIGNIFICANCE: : Currently, substantial evidence has demonstrated the application of fresh and decellularized human corneal lenticules from increasing myopic surgeries. Further preservation of decellularized lenticules would extend its clinical application. However, whether fresh and preserved decellularized lenticules have the same effects in vivo, including refractive correction, remains unclear. Herein, we decellularized human lenticules with or without mechanically strengthened crosslinking. After storage in glycerol for 3 months, the lenticules were reimplanted into rabbit corneas. Comprehensive comparisons were performed among fresh human lenticules (FHLs), decellularized human lenticules (DHLs) and crosslinked DHLs. Our study indicated that FHLs are ideal inlay products, whereas preserved DHLs could be an alternative for intrastromal lamellar keratoplasty. Our study provides new insights into the clinical application of human lenticule recycling.