Effects of Ni-Doping of Ceria-Based Materials on Their Micro-Structures and Dynamic Oxygen Storage and Release Behaviors

Inverse ceria-nickel catalyst for enhanced C-O bond hydrogenolysis of biomass and polyether

Regulating interfacial electronic structure of oxide-metal composite catalyst for the selective transformation of biomass or plastic waste into high-value chemicals through specific C-O bond scission is still challenging due to the presence of multiple reducible bonds and low catalytic activity. Herein, we find that the inverse catalyst of 4CeOx/Ni can efficiently transform various lignocellulose derivatives and polyether into the corresponding value-added hydroxyl-containing chemicals with activity enhancement (up to 36.5-fold increase in rate) compared to the conventional metal/oxide supported catalyst. In situ experiments and theoretical calculations reveal the electron-rich interfacial Ce and Ni species are responsible for the selective adsorption of C-O bond and efficient generation of Hδ- species, respectively, which synergistic facilitate cleavage of C-O bond and subsequent hydrogenation. This work advances the fundamental understanding of interfacial electronic interaction over inverse catalyst and provides a promising catalyst design strategy for efficient transformation of C-O bond.

Improved Selectivity and Stability in Methane Dry Reforming by Atomic Layer Deposition on Ni-CeO2-ZrO2/Al2O3 Catalysts

Ni can be used as a catalyst for dry reforming of methane (DRM), replacing more expensive and less abundant noble metal catalysts (Pt, Pd, and Rh) with little sacrifice in activity. Ni catalysts deactivate quickly under realistic DRM conditions. Rare earth oxides such as CeO2, or as CeO2-ZrO2-Al2O3 (CZA), are supports that improve both the activity and stability of Ni DRM systems due to their redox activity. However, redox-active supports can also enhance the undesired reverse water gas shift (RWGS) reaction, reducing the hydrogen selectivity. In this work, Ni on CZA was coated with an ultrathin Al2O3 overlayer using atomic layer deposition (ALD) to study the effects of the overlayer on catalyst activity, stability, and H2/CO ratio. A low-conversion screening method revealed improved DRM activity and lower coking rate upon the addition of the Al2O3 ALD overcoat, and improvements were subsequently confirmed in a high-conversion reactor at long times onstream. The overcoated samples gave an H2/CO ratio of ∼1 at high conversion, much greater than uncoated catalysts, and no evidence of deactivation. Characterization of used (but still active) catalysts using several techniques suggests that active Ni is in formal oxidation state >0, Ni-Ce-Al is most likely present as a mixed oxide at the surface, and a nominal thickness of 0.5 nm for the Al2O3 overcoat is optimal.

Efficient detection of 45 ppb ammonia at room temperature using Ni-doped CeO2 octahedral nanostructures

To meet the requirements in air quality monitors for the public and industrial safety, sensors are required that can selectively detect the concentration of gaseous pollutants down to the parts per million (ppm) and ppb (parts per billion) levels. Herein, we report a remarkable NH3 sensor using Ni-doped CeO2 octahedral nanostructure which efficiently detects NH3 as low as 45 ppb at room temperature. The Ni-doped CeO2 sensor exhibits the maximum response of 42 towards 225 ppm NH3, which is ten-fold higher than pure CeO2. The improved sensing performance is caused by the enhancement of oxygen vacancy, bandgap narrowing, and redox property of CeO2 caused by Ni doping. Density functional theory confirms that O vacancy with Ni at Ce site (VONiCe) augments the sensing capabilities. The Bader charge analysis predicts the amount of charge transfer (0.04 e) between the Ni-CeO2 surface and the NH3 molecule. As well, the high negative adsorption energy (≈750 meV) and lowest distance (1.40 Å) of the NH3 molecule from the sensor surface lowers the detection limit. The present work enlightens the fabrication of sensing elements through defect engineering for ultra-trace detection of NH3 to be useful further in the field of sensor applications.

How Transparent Oxides Gain Some Color: Discovery of a CeNiO3 Reduced Bandgap Phase As an Absorber for Photovoltaics

In this work, we describe the formation of a reduced bandgap CeNiO₃ phase, which, to our knowledge, has not been previously reported, and we show how it is utilized as an absorber layer in a photovoltaic cell. The CeNiO₃ phase is prepared by a combinatorial materials science approach, where a library containing a continuous compositional spread of Ce _xNi_{1- x}O _y is formed by pulsed laser deposition (PLD); a method that has not been used in the past to form Ce-Ni-O materials. The library displays a reduced bandgap throughout, calculated to be 1.48-1.77 eV, compared to the starting materials, CeO₂ and NiO, which each have a bandgap of ∼3.3 eV. The materials library is further analyzed by X-ray diffraction to determine a new crystalline phase. By searching and comparing to the Materials Project database, the reduced bandgap CeNiO₃ phase is realized. The CeNiO₃ reduced bandgap phase is implemented as the absorber layer in a solar cell and photovoltages up to 550 mV are achieved. The solar cells are also measured by surface photovoltage spectroscopy, which shows that the source of the photovoltaic activity is the reduced bandgap CeNiO₃ phase, making it a viable material for solar energy.

High oxygen storage capacity and enhanced catalytic performance of NiO/NixCe1−xO2−δ nanorods: synergy between Ni-doping and 1D morphology

NiO/Ni-doped ceria nanorods have been synthesized. Their unique structure combines specific composition and 1D morphology, which provide great improvements in their physical chemical properties.