Mesoporous KIT-6 Supported Pd–M x O y (M = Ni, Co, Fe) Catalysts with Enhanced Selectivity for p-Chloronitrobenzene Hydrogenation

Surface Modification by Amino Group Inducing for Highly Efficient Catalytic Oxidation of Toluene over a Pd/KIT-6 Catalyst

Toluene is one of the typical volatile organic compounds in industry, particularly in energy and fuels production processes, which is required to be eliminated effectively to protect the environment. Catalytic oxidation of toluene is widely studied for its high efficiency, and rational design and synthesis of metal catalysts are keys for toluene oxidation. In this study, an efficient catalyst was designed and synthesized by introducing -NH₂ groups on the ordered mesoporous silica (KIT-6) surface to anchor and disperse Pd species, leading to Pd nanoparticles being highly dispersed with uniform particle size distribution. Meanwhile, it was found that the introduction of -NH₂ made Pd centers present an electron-rich state, and the active Pd centers could activate O₂ molecules to generate more reactive oxygen species and promote the conversion of toluene, which was verified by in situ XPS and O₂-TPD characterization. Compared with the catalysts prepared by an impregnation method, the catalytic performance of the Pd/NH₂-KIT-6 (0.5 wt %) catalyst was significantly improved. A conversion of 90% for toluene (2400 ppm, 24,000 mL·g^-1·h^-1) was achieved at 171 °C, and the toluene conversion was maintained above 90% for 900 min, displaying the excellent activity and stability of the Pd/NH₂-KIT-6 catalyst.

Synthesis of Pd-CoxOy Hybrid Nanostructure-Encapsulated Hollow Silica Nanospheres through Reverse Microemulsion Systems and Their Application as Efficient Hydrodechlorination Catalysts

Pd-Co_xO_y heteroaggregate-encapsulated hollow porous silica nanoreactors (Pd-Co_xO_y@HPSNs) were synthesized by a reverse microemulsion system. The key design of the developed reverse microemulsion system is to use poly(ethyleneimine) in the water droplets as the void templates for silica deposition and for anchoring the catalytic functionality inside the hollow silica nanospheres. The synthesized Pd-Co_xO_y@HPSNs contain ∼3 nm Pd-Co_xO_y hybrid nanostructures in ∼10 nm central cavities of silica nanospheres and illustrated a significantly promoted efficiency for hydrodechlorination of a series of chlorophenols into phenols under mild reaction conditions. The catalytic enhancement of Pd-Co_xO_y@HPSNs is ascribed to the synergistic effect between Pd and Co_xO_y and the protection of silica shells to the inner catalytic functionality.

Hollow and mesoporous aluminosilica-encapsulated Pt-CoOx for the selective hydrogenation of substituted nitroaromatics

Hollow and mesoporous aluminosilica nanoreactors (HMANs) with Pt-CoO_x cores (∼4.7 nm) and hollow aluminosilica shells (∼50 nm) were designed by a selective etching method. The Pt-CoO_x@HMANs demonstrate a greatly enhanced activity and selectivity for the hydrogenation of various substituted nitroaromatics compared to Pt@HMANs and Pt-CoO_x@SiO₂.

Highly Efficient Ir-CoOx Hybrid Nanostructures for the Selective Hydrogenation of Furfural to Furfuryl Alcohol

Decoration of noble metals with transition-metal oxides has been intensively studied for heterogeneous catalysis. However, controllable syntheses of metal-metal oxide heterostructures are difficult, and elucidation of such interfaces is still challenging. In this work, supported IrCo alloy nanoparticles are transformed into supported Ir-CoO_x close-contact nanostructures by in situ calcination and following selective reduction. Relative to Ir/Al₂O₃, Ir-CoO_x/Al₂O₃ shows greatly enhanced activities for the hydrogenation of furfural derivatives to the corresponding furfuryl alcohol derivatives with more than 99% selectivity and demonstrates significantly improved activities and selectivity for hydrogenations of α,β-unsaturated aldehydes to α,β-unsaturated alcohols. The modification of Ir surfaces with CoO_x prevents Ir nanoparticles from growing, achieving high thermal and catalytic stabilities. Theoretic calculation suggests that the better catalytic performance of Ir-CoO_x/Al₂O₃ is ascribed to the Ir-CoO_x interaction, which promotes the absorption of furfural as well as desorption of furfuryl alcohol, resulting in enhanced catalytic activities.

Fabrication of Ir-CoOx@mesoporous SiO2 Nanoreactors for Selective Hydrogenation of Substituted Nitroaromatics

Nanosized Ir catalysts suffer from serious side reactions and poor stability during hydrogenation of substituted nitroaromatics to produce aromatic amines. In this work, core-shell nanostructures with sub-4 nm Ir-CoO_x hybrid cores and mesoporous SiO₂ shells were designed and prepared to overcome these problems. The Ir-CoO_x hybrid cores were converted from IrCo alloy nanoparticles (NPs) inside SiO₂ through in situ calcination and reduction pretreatments. The SiO₂ mesoporous shells in Ir-CoO_x@SiO₂ nanoreactors prevented the agglomeration/sintering of IrCo NPs, while allowing the free reactants and products (big molecules). The synergy between Ir and CoO_x species improved H₂ adsorption, thus affecting the reaction rate as well as the selectivity to aromatic amines. As a result, the obtained Ir-CoO_x@SiO₂ nanocatalyst showed tremendous improvement in catalytic activity, selectivity, and stability.

Enhanced Catalytic Hydrogenation Performance of Rh-Co2O3 Heteroaggregate Nanostructures by in Situ Transformation of Rh@Co Core-Shell Nanoparticles

In this work, poly(vinylpyrrolidone)-stabilized 3-5 nm Rh@Co core-shell nanoparticles were synthesized by a sequential reduction method, which was further in situ transformed into Rh-Co₂O₃ heteroaggregate nanostructures on alumina supports. The studies of XRD, HAADF-STEM images with phase mappings, XPS, TPR, and DRIFT-IR with CO probes confirm that the as-synthesized Rh@Co nanoparticles were core-shell-like structures with Rh cores and Co-rich shells, and Rh-Co₂O₃ heteroaggregate nanostructures are obtained by calcination of Rh@Co nanoparticles and subsequent selective H₂ reduction. The Rh-Co₂O₃/Al₂O₃ nanostructures demonstrated enhanced catalytic performance for hydrogenations of various substituted nitroaromatics relative to individual Rh/Al₂O₃ and illustrated a high catalytic stability during recycling experiments for o-nitrophenol hydrogenation reactions. The catalytic performance enhancement of Rh-Co₂O₃/Al₂O₃ nanocatalysts is ascribed to the Rh-Co₂O₃ interfaces where the Rh-Co₂O₃ interaction not only prevents the active Rh particles from agglomeration but also promotes the catalytic hydrogenation performance.

Controlled Synthesis and Enhanced Catalytic Activity of Well-Defined Close-Contact Pd-ZnO Nanostructures

In this study, PdZn-ordered intermetallic nanoparticles (NPs) were prepared in liquid phase by butyllithium co-reduction of their precursors at 240 °C. Through calcination and subsequent reduction with H₂, the synthesized PdZn NPs were then in situ transformed into Pd-ZnO heteroaggregate nanocatalysts on alumina supports. Various characterization techniques, such as diffuse reflectance Fourier transform infrared with CO probes, transmission electron microscopy, X-ray diffraction, H₂ temperature-programmed reduction, and X-ray photoelectron spectra, reveal that PdZn NPs are ordered intermetallic compounds, and in situ transformation of PdZn alloy NPs results in close-contact Pd-ZnO heteroaggregates, where the interfaces are highly active and the interaction between Pd and ZnO prevents the active particles from agglomeration. The catalytic hydrogenations of nitrophenols over Pd/Al₂O₃ and Pd-ZnO/Al₂O₃ were investigated. The results show that Pd-ZnO/Al₂O₃ illustrates an enhanced catalytic activity relative to Pd/Al₂O₃, and no obvious activity degradation was observed in the recycle catalytic experiments over such nanostructures. It is concluded that the Pd-ZnO interaction not only enhances the catalytic hydrogenation activity but also promotes the thermal and catalytic stability.

Ultrafine and highly dispersed platinum nanoparticles confined in a triazinyl-containing porous organic polymer for catalytic applications

The fabrication of stable porous organic polymers (POPs) with heteroatoms that can firmly anchor noble metal nanoparticles (NPs) is a challenging and significant task for heterogeneous catalysis. In the current work, we used piperazine and cyanuric chloride as precursors and successfully fabricated a PC-POP material. Then, through the impregnation method and subsequently the reduction method, ultrafine Pt NPs were confined in the PC-POP with a high dispersion. The Pt NP active sites are accessible due to the uniform mesopores of the PC-POP that facilitate diffusion and mass transfer. The organic cages and nitrogen atoms in the PC-POP frameworks can make the Pt NPs stably anchored in the PC-POP during the catalytic process. The obtained Pt@PC-POP nanocatalyst showed excellent catalytic activity and good recyclability in the selective hydrogenation of halogenated nitrobenzenes and catalytic hydrolysis of ammonia borane as compared with many other reported noble metal catalysts.

Systematic Identification of Promoters for Methane Oxidation Catalysts Using Size- and Composition-Controlled Pd-Based Bimetallic Nanocrystals

Promoters enhance the performance of catalytic active phases by increasing rates, stability, and/or selectivity. The process of identifying promoters is in most cases empirical and relies on testing a broad range of catalysts prepared with the random deposition of active and promoter phases, typically with no fine control over their localization. This issue is particularly relevant in supported bimetallic systems, where two metals are codeposited onto high-surface area materials. We here report the use of colloidal bimetallic nanocrystals to produce catalysts where the active and promoter phases are colocalized to a fine extent. This strategy enables a systematic approach to study the promotional effects of several transition metals on palladium catalysts for methane oxidation. In order to achieve these goals, we demonstrate a single synthetic protocol to obtain uniform palladium-based bimetallic nanocrystals (PdM, M = V, Mn, Fe, Co, Ni, Zn, Sn, and potentially extendable to other metal combinations) with a wide variety of compositions and sizes based on high-temperature thermal decomposition of readily available precursors. Once the nanocrystals are supported onto oxide materials, thermal treatments in air cause segregation of the base metal oxide phase in close proximity to the Pd phase. We demonstrate that some metals (Fe, Co, and Sn) inhibit the sintering of the active Pd metal phase, while others (Ni and Zn) increase its intrinsic activity compared to a monometallic Pd catalyst. This procedure can be generalized to systematically investigate the promotional effects of metal and metal oxide phases for a variety of active metal-promoter combinations and catalytic reactions.

Ultrafine FePd Nanoalloys Decorated Multiwalled Cabon Nanotubes toward Enhanced Ethanol Oxidation Reaction

Ultrafine iron-palladium (FePd) nanoalloys deposited on γ-Fe2O3, FePd-Fe2O3, further anchored on carboxyl multiwalled carbon nanotubes (MWNTs-COOH), FePd-Fe2O3/MWNTs, were successfully synthesized by a facile one-pot solution based method as thermally decomposing palladium acetylacetonate (Pd(acac)2) and iron pentacarbonyl (Fe(CO)5) in a refluxing dimethylformamide solution in the presence of MWNTs-COOH. A 3.65 fold increase of peak current density was observed in cyclic voltammetry (CV) for ethanol oxidation reaction (EOR) compared with that of Pd/MWNTs after normalizing to Pd mass. The greatly enhanced tolerance stability toward poisoning species and largely reduced charge transfer resistance were also obtained in chronoamperometry and electrochemical impedance spectroscopy due to the downward shifted d-band center of FePd alloy, easily formed oxygen containing species on Fe2O3, and the stabilizing role of the MWNTs.

Ni–Co alloy nanostructures anchored on mesoporous silica nanoparticles for non-enzymatic glucose sensor applications

Uniform sized Ni–Co alloy nanoparticles were effectively confined over the active channels of mesoporous silica nanoparticles (MSN) using a simple chemical reduction method, and the resultant nanostructures exhibited a spherical configuration with a mean diameter of 5 nm.