Microwave-assisted Hydrothermal Fabrication of Magnetic Amino-grafted Graphene Oxide Nanocomposite as a Heterogeneous Knoevenagel Catalyst

Size-dependent As(V) adsorption of reduced graphene oxide/magnetite nanocomposites

Arsenic (As(V)) contamination in aqueous resources poses a significant environmental, and public health risk due to its high toxicity. To address this challenge, we synthesized and characterized novel reduced graphene oxide/magnetite (rGO/Fe3O4) nanocomposites, which are efficient adsorbents for removing As(V). Using a co-precipitation method, we obtained three distinct sizes of rGO/Fe3O4 nanocomposites by controlling the salt concentration (Fe2+: Fe3+) ratios. Analysis of the adsorption ability of the samples shows that the adsorption efficiency can reach up to 98.10% within 90 min, and the adsorption capacity value reaches 20.55 mg/g. Furthermore, these test data are ably consistent with both the pseudo-second-order model and the Langmuir model, based on which the adsorption mechanism has been proposed. These results show that the rGO/Fe3O4 nanocomposites that we synthesized are a potential adsorbent for the removal of heavy metals from water.

Click nanosponge - A novel amine-rich β-cyclodextrin-based crosslinked polymer for heterogeneous catalysis

Cyclodextrin-based nanosponges are promising materials for heterogeneous catalysis due to their inherent synthetic versatility, tunable porosity and nontoxicity. In this work, a primary amine-rich β-cyclodextrin nanosponge was synthesized via click imine condensation reaction between 1,6-hexamethylamine-functionalized β-cyclodextrin (CDAM) and glutaraldehyde (GLT) to afford CDGLAM, in mild conditions. The crosslinked polymer exhibited a BET surface area of 36.39 m2 g-1, an average pore diameter of 3.09 nm (as assessed by the BJH method), and thermal stability up to 253 °C. CDGLAM was tested as heterogeneous catalyst for the metal-free Henry and Knoevenagel reactions, between aromatic aldehydes and nitromethane or ethyl cyanoacetate, respectively, affording the products in moderate to very high yields. These results show the ease of preparation of β-CD-based nanosponges from a green chemistry perspective, as well as their potential for future use in catalytic systems.

A post-sulfonated one-pot synthesized magnetic cellulose nanocomposite for Knoevenagel and Thorpe-Ziegler reactions

The development of biodegradable and active cellulosic-based heterogeneous catalysts for the synthesis of different organic compounds would be attractive in pharmaceutical and petrochemical-related industries. Herein, a post-sulfonated composite of one-pot synthesized magnetite (Fe3O4) and cellulose nanocrystals (CNCs) was used as an effective and easily separable heterogeneous catalyst for activating the Knoevenagel and Thorpe-Ziegler reactions. The composite was developed hydrothermally from microcrystalline cellulose (MCC), iron chlorides, urea, and hydrochloric acid at 180 °C for 20 h in a one-pot reaction. After collecting the magnetic CNCs (MCNCs), post-sulfonation was performed using chlorosulfonic acid (ClSO3H) in DMF at room temperature producing sulfonated MCNCs (SMCNCs). The results confirmed the presence of sulfonated Fe3O4 and CNCs with a hydrodynamic size of 391 nm (±25). The presence of cellulose was beneficial for preventing Fe3O4 oxidation or the formation of agglomerations without requiring the presence of capping agents, organic solvents, or an inert environment. The SMCNC catalyst was applied to activate the Knoevenagel condensation and the Thorpe-Ziegler reaction with determining the optimal reaction conditions. The presence of the SMCNC catalyst facilitated these transformations under green procedures, which enabled us to synthesize a new series of olefins and thienopyridines, and the yields of some isolated olefins and thienopyridines were up to 99% and 95%, respectively. Besides, the catalyst was stable for five cycles without a significant decrease in its reactivity, and the mechanistic routes of both reactions on the SMCNCs were postulated.

Ce-Containing MgAl-Layered Double Hydroxide-Graphene Oxide Hybrid Materials as Multifunctional Catalysts for Organic Transformations

The combination of layered double hydroxides (LDH) with graphene oxide (GO) enables the formation of nanohybrids with improved properties. This work focuses on the structural and catalytic properties of Ce-containing MgAl LDH-GO composites bearing different concentrations of GO in the range of 5-25 wt.%. The synthesis of the composites was performed by co-precipitating the LDH phase in the presence of GO, while their characterization was performed using XRF, XRD, DRIFT, Raman, SEM, nitrogen adsorption-desorption, and acidity-basicity measurements. The LDH-GO composites, showing redox, basic, and acid catalytic functions, were tested in two different types of organic transformations: (i) Knoevenagel condensation and (ii) one-pot cascade oxidation-Knoevenagel condensation. (i) The cinnamic acid was synthesized by the Knoevenagel condensation of benzaldehyde with diethylmalonate. The composites showed catalytic performances in strong contrast to neat LDH or GO, suggesting a synergistic interaction between the two components. During Knoevenagel condensation, the catalytic activity increased with the GO content in the hybrids up to 15 wt.% and decreased afterwards. (ii) 2-Benzoyl-3-phenylacrylonitrile was synthesized by the aerobic oxidation of benzyl alcohol followed by the Knoevenagel condensation with benzoyl acetonitrile using three different non-polar solvents, i.e., toluene, benzene, and mesitylene. The conversion of benzyl alcohol was higher for the hybrid materials compared to the individual components but decreased with the increase of the graphene oxide concentration.