Production and Application of Highly Efficient and Reusable Palladium Nanocatalyst Decorated on the Magnetically Retrievable Chitosan/Activated Carbon Composite Microcapsules

Carbonized cellulose microspheres loaded with Pd NPs as catalyst in p-nitrophenol reduction and Suzuki-Miyaura coupling reaction

Catalytic reduction of p-nitrophenol is usually carried out using transition metal nanoparticles such as gold, palladium, silver, and copper, especially palladium nanoparticles (Pd NPs), which are characterized by fast reaction rate, high turnover frequency, good selectivity, and high yield. However, the aggregation and precipitation of the metals lead to the decomposition of the catalyst, which results in a significant reduction of the catalytic activity. Therefore, the preparation of homogeneous stabilized palladium nanoparticles catalysts has been widely studied. Stabilized palladium nanoparticles mainly use synthetic polymers. Cellulose microspheres, as a natural polymer material with low-cost and porous fiber network structure, are excellent carriers for stabilizing metal nanoparticles. Cellulose microspheres impregnated with palladium metal nanoparticles were carbonized to have a larger specific surface area and highly dispersed palladium nanoparticles, which exhibited excellent catalytic activity in the catalytic reduction of p-nitrophenol. In this work, the cellulose carbon-based microspheres palladium (Pd@CCM) catalysts were designed and characterized by SEM, TEM, EDS, XRD, FTIR, XPS, TGA, BET, and so on. Furthermore, the catalytic performance of Pd@CCM catalysts was investigated via p-nitrophenol reduction, which showed high catalytic activity. This catalyst also exhibited excellent catalytic performance in the Suzuki-Miyaura coupling reaction. Linking aromatic monomer and benzene through Suzuki-Miyaura coupling was presented as an effective route to obtaining biaryls, and the synthesis method is low-cost and simple. In addition, Pd@CCM showed desirable recyclability while maintaining its catalytic activity even after five recycles. This work is highly suggestive of the design and application of the heterogeneous catalyst.

Enhanced bioenergy and nutrients recovery from wastewater using hybrid anodes in microbial nutrient recovery system

Background

The combined microbial fuel cell–microbial nutrient recovery system has lately been thoroughly explored from an engineering standpoint. The relevance of microbial communities in this process, on the other hand, has been widely underestimated.

Results

A lab-scale microbial nutrients recovery system was created in this work, and the microbial community structure was further defined, to give a thorough insight into the important microbial groups in the present system. We reported for the first-time different hybrid anodes of activated carbon and chitosan that were used in the microbial nutrient recovery system for bioenergy production, and, for the removal of COD and recovery of nutrients present in the wastewater. The hybrid anodic materials were studied to adapt electrochemically active bacteria for the recovery of nutrients and energy generation from wastewater without the need for an external source of electricity. The potential of the created hybrid anodes in terms of nutrients recovery, chemical oxygen demand elimination, and energy generation from municipal wastewater was thoroughly examined and compared with each other under similar operating conditions. When the COD loading was 718 mg/L, a total COD removal of ~ 79.2% was achieved with a hybrid activated carbon and chitosan anode having an equal ratio after 10 days of the operation cycle. The maximum power density estimated for hybrid anode (~ 870 mWm⁻²) was found.

Conclusion

Overall, this work reveals a schematic self-driven way for the collection and enrichment of nutrients (~ 72.9% phosphorus recovery and ~ 73% ammonium recovery) from municipal wastewater, as well as consistent voltage production throughout the operation.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02116-y.

Magnetic mesocellular foams with nickel complexes: as efficient and reusable nanocatalysts for the synthesis of symmetrical and asymmetrical diaryl chalcogenides

In this work, magnetic mesocellular foam (M-MCF) silica nanoparticles were prepared via inserting magnetic nanoparticles into the pores of mesocellular foams, the inner surface of which was functionalized with a methionine-nickel complex (M-MCF@Met-Ni). The structure of the as-prepared nanocatalysts was studied by FT-IR spectroscopy, BET, TGA, VSM, SEM, HR-TEM, EDS, WDX, XRD, and ICP-OES techniques. Thereafter, this nanocatalyst was used as a new, effective, and magnetically reusable catalyst for C-S and C-Se bond formation under mild conditions. All corresponding products were prepared with good yields and appropriate turnover number (TON) and turnover frequency (TOF), which reveals the high activity of this magnetic nanocatalyst in both reactions. In addition, the recovery and hot filtration tests indicated that this catalyst could be simply separated from the reaction mixture using an outside magnet and reused five consecutive times without any significant loss of its catalyst activity or metal leaching.

Green Synthesis of Pd Nanoparticles for Sustainable and Environmentally Benign Processes

Among transition metal nanoparticles, palladium nanoparticles (PdNPs) are recognized for their high catalytic activity in a wide range of organic transformations that are of academic and industrial importance. The increased interest in environmental issues has led to the development of various green approaches for the preparation of efficient, low-cost and environmentally sustainable Pd-nanocatalysts. Environmentally friendly solvents, non-toxic reducing reagents, biodegradable capping and stabilizing agents and energy-efficient synthetic methods are the main aspects that have been taken into account for the production of Pd nanoparticles in a green approach. This review provides an overview of the fundamental approaches used for the green synthesis of PdNPs and their catalytic application in sustainable processes as cross-coupling reactions and reductions with particular attention afforded to the recovery and reuse of the palladium nanocatalyst, from 2015 to the present.

Immobilizing of palladium on melamine functionalized magnetic chitosan beads: A versatile catalyst for p-nitrophenol reduction and Suzuki reaction in aqueous medium

In this study, an environmental-friendly palladium catalyst with high efficiency, magnetic, recoverability, reusability, and excellent stability was prepared and thoroughly characterized by the Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), X-ray diffraction (XRD), Elemental mapping, Thermogravimetric analysis (TGA) and Energy-dispersive X-ray spectroscopy (EDX). Results demonstrates that melamine provides a coordination point on the surface of chitosan microspheres, which provides a platform for the uniform distribution of palladium (II) and combines with palladium (II) firmly to avoid unnecessary leaching of nanoparticles. Besides, Fe₃O₄/CS-Me@Pd microcapsules exhibited high catalytic performance in reducing p-NP in water at room temperature (150-300 s). This composite was also effective in the Suzuki-Miyaura coupling reaction under mild conditions with high catalytic performance (TON = 3.8 × 10⁴, TOF = 7.6 × 10⁴). Reproducibility experiments also showed that Fe₃O₄/CS-Me@Pd microcapsules have high recovery efficiency and can work at least six times during these two catalytic reactions. The hot filtration test indicated that the catalyst has heterogeneous nature.

Magnetic chitosan stabilized palladium nanostructures: Potential catalysts for aqueous Suzuki coupling reactions

This work describes the preparation of palladium-based catalyst supported on magnetic chitosan (Pd@IO-Chitosan) for Suzuki Miyaura C-C coupling reaction. The Pd@IO-Chitosan catalyst was characterized using different spectroscopic and microscopic techniques such as Fourier transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), X-ray Absorption Near Edge Structure (XANES) Spectroscopy and X-ray photoelectron spectroscopy (XPS). Pd@IO-Chitosan was further analysed by thermogravimetric analysis (TGA) in order to determine its thermal behavior. The catalyst comprised Pd, PdO species stabilised by chitosan that facilitated Suzuki coupling reactions. Palladium loading as low as 0.0055 mol% was found to be effective for aqueous Suzuki cross-couplings with excellent yields of over 99%. The catalyst could be recycled and reused at least 12 times with no significant decrease in its catalytic activity.

Novel chitosan based smart cathode electrocatalysts for high power generation in plant based-sediment microbial fuel cells

Smart electrocatalysts are synthesized from chitosan polymer and magnetic particles to enhance power by plant based sediment microbial fuel cell (P-SMFC). Cross-linked procedure is performed gelatinous microspheres as supporting metals (Cu, Pd, Mn, Pt, and Ni) and magnetic particles which create a porous structure on smart catalysts for increase ORR activity. A high and quick OCV rising is achieved with addition of Mag-Pd-Ch in reactor, and OCV value immediately increase from 0.408 V to 0.819 V within 10 minutes. The highest power density is also obtained as 1298 mW m^-2 for reactor with Mag-Pd-Ch, which was 15 times higher than control. Significant metal leaching is observed using plant growth for smart catalyst containing Cu. Consequently, high power production, good stabilization, easy separation from water environment due to magnetic property, and relatively low cost make use of Mag-Pd-Ch both economic and environment friendly tools to enhance power generation in P-SMFC.

l-Methionine–Pd complex supported on hercynite as a highly efficient and reusable nanocatalyst for C–C cross-coupling reactions

An l-methionine–Pd complex was covalently immobilized on the surface of hercynite (FeAl₂O₄) MNPs, and its catalytic properties were studied in C–C coupling reactions.

In Situ Immobilized Silver Nanoparticles on Rubia tinctorum Extract-Coated Ultrasmall Iron Oxide Nanoparticles: An Efficient Nanocatalyst with Magnetic Recyclability for Synthesis of Propargylamines by A3 Coupling Reaction

This research suggests a green method for synthesizing hybrid magnetic nanocomposites that can be used as a reductant and a stabilizing agent for immobilizing metal nanoparticles (NPs). The central idea is the modification of magnetic NPs using Rubia tinctorum extract, which consists of numerous carbonyl and phenolic hydroxyl functional groups to increase adsorption of metals and chelate silver ions, and decrease the adsorption of silver ions by Ag NPs, in situ. Thus, the suggested catalyst preparation process does not require toxic reagents, additional reductants, and intricate instruments. To show the effectiveness of the plant extract in reducing and immobilizing Ag NPs, the structural, morphological, and physicochemical features of the particles are studied using Fourier-transform infrared spectroscopy, inductively coupled plasma atomic emission spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, vibrating sample magnetometry, X-ray diffraction analysis, and X-ray photoelectron spectroscopy. One of the advantages of the suggested method is to reduce the size of the magnetic NPs from 15-20 to 2-5 nm, in the presence of the extract. Additionally, the prepared Fe3O4@R. tinctorum/Ag nanocatalyst is demonstrated to exhibit a very high activity in the catalysis of the three-component reaction of aldehydes, amines, and alkynes (A3 coupling) with good to high yields of diverse propargylamines. Moreover, the nanocatalyst can be recovered several times with no considerable leaching or loss of performance.

Supercritical water assisted preparation of recyclable gold nanoparticles and their catalytic utility in cross-coupling reactions under sustainable conditions

Preparation of gold nanoparticles (AuNPs) in environmentally friendly water without using any reducing agents under supercritical conditions is demonstrated. PXRD, XPS, FE-SEM and HR-TEM analysis confirmed the formation of phase-pure and crystalline AuNPs of the size of ∼10-30 nm. The catalytic potential of AuNPs was manifested through a generalized green procedure that could accommodate both Sonogashira as well as Suzuki coupling under aqueous conditions at low catalytic loading (0.1 mol%). The AuNP catalyst was found to be recuperated after the reaction and reused for up to six catalytic cycles with no leaching out of gold species as confirmed through ICP-OES analysis. With no confinement of AuNP catalysis to cross-coupling reaction, synthetic extension to one-flask preparation of π-conjugated semiconductors (4 examples) and their optoelectronic properties were also investigated. Other significant features of the present work include short reaction time, site-selectivity, wide substrate scope, high conversion, good chemical yields and applicability in gram-scale synthesis. Overall, the results of this paper signify an operationally sustainable supercritical fluid processing method for the synthesis of AuNPs and their catalytic application towards cross-coupling reactions in green media.