Impact of Various Metallic Oxide Nanoparticles on Ethanol Production by Saccharomyces cerevisiae BY4743: Screening, Kinetic Study and Validation on Potato Waste

Effect of nickel oxide nanoparticles on bioethanol production by Pichia kudriavzveii IFM 53048 using banana peel waste substrate

The use of nanomaterials in bioethanol production is promising and on the increase. In this report, the effect of nickel oxide nanoparticles (NiO NPs) on bioethanol production in the presence of a novel yeast strain, Pichia kudriavzveii IFM 53048 isolated from banana wastes was investigated. The hot percolation method was employed for the green synthesis of NiO NPs. The logistic and modified Gompertz kinetic models employed in this study showed a 0.99 coefficient of determination (R2) on cell growth, and substrate utilization on the initial rate data plot which indicate that these model were best suited for bioethanol production studies. As a result, 99.95% of the substrate was utilized to give 0.23 g/L/h-1 bioethanol productivity, and 51.28% fermentation efficiency, respectively. At 0.01 wt% of NiO NPs, maximum production was achieved with 0.27 g/g bioethanol yield. Meanwhile, 0.78 h-1 maximum specific growth rate (µmax) of the microorganism, 3.77 g/L bioethanol concentration (Pm), 0.49 g/L/h production rate (rp.m), and 2.43 h production lag time (tL) were obtained when 0.01 wt% of NiO NPs were used during the bioethanol production process. However, a decrease in bioethanol concentrations occurred at ≥0.02 wt% of NiO NPs. The incorporation of NiO NPs in the simultaneous saccharification and fermentation (SSF) process improved the production of bioethanol by 1.90 fold using banana peel wastes as substrate. These revealed NiO NPs could serve as a suitable biocatalyst in the green production of bioethanol from banana peel waste materials.

Food waste to resource recovery: a way of green advocacy

Due to the massive growth in population and urbanization, there has been a huge increase in the volume of food waste globally. The Food and Agriculture Organization (FAO) has estimated that around one-third of all food produced each year is wasted. Food waste leads to the emission of greenhouse gas and depletion of the soil fertility. Nevertheless, it has immense potential for the recovery of high-value energy, fuel, and other resources. This review summarizes the latest advances in resource recovery from food waste by using technologies that include food waste-mediated microbial fuel cell (MFC) for bioenergy production. In addition to this, utilization of food waste for the production of bioplastic, biogas, bioethanol, and fertilizer has been also discussed in detail. Competitive benefits and accompanying difficulties of these technologies have also been highlighted. Furthermore, future approaches for more efficient use of food waste for the recovery of valuable resources have been also offered from an interdisciplinary perspective.

Current Trends and Future Prospects of Nanotechnology in Biofuel Production

Biofuel is one of the best alternatives to petroleum-derived fuels globally especially in the current scenario, where fossil fuels are continuously depleting. Fossil-based fuels cause severe threats to the environment and human health by releasing greenhouse gases on their burning. With the several limitations in currently available technologies and associated higher expenses, producing biofuels on an industrial scale is a time-consuming operation. Moreover, processes adopted for the conversion of various feedstock to the desired product are different depending upon the various techniques and materials utilized. Nanoparticles (NPs) are one of the best solutions to the current challenges on utilization of biomass in terms of their selectivity, energy efficiency, and time management, with reduced cost involvement. Many of these methods have recently been adopted, and several NPs such as metal, magnetic, and metal oxide are now being used in enhancement of biofuel production. The unique properties of NPs, such as their design, stability, greater surface area to volume ratio, catalytic activity, and reusability, make them effective biofuel additives. In addition, nanomaterials such as carbon nanotubes, carbon nanofibers, and nanosheets have been found to be cost effective as well as stable catalysts for enzyme immobilization, thus improving biofuel synthesis. The current study gives a comprehensive overview of the use of various nanomaterials in biofuel production, as well as the major challenges and future opportunities.

Impact of nanoparticle inclusion on bioethanol production process kinetic and inhibitor profile

•

NiO nanoparticle (NP) inclusion enhanced bioethanol production up to 59.96 %.

•

Band energy gap impact NP catalytic performance in bioethanol production.

•

NiO nanoparticle biocatalyst improved bioethanol productivity by 145 %.

•

Modified Gompertz model was used to describe ethanol production with NP inclusion.

•

Metallic NiO nanoparticles significantly reduced acetic acid concentration by 110 %.

This study examines the effects of nanoparticle inclusion in instantaneous saccharification and fermentation (NIISF) of waste potato peels. The effect of nanoparticle inclusion on the fermentation process was investigated at different stages which were: pre-treatment, liquefaction, saccharification and fermentation. Inclusion of NiO NPs at the pre-treatment stage gave a 1.60-fold increase and 2.10-fold reduction in bioethanol and acetic acid concentration respectively. Kinetic data on the bioethanol production fit the modified Gompertz model (R ² > 0.98). The lowest production lag time (t _L) of 1.56 h, and highest potential bioethanol concentration (P _m) of 32 g/L were achieved with NiO NPs inclusion at different process stages; the liquefaction stage and the pre-treatment phase, respectively. Elevated bioethanol yield, coupled with substantial reduction in process inhibitors in the NIISF processes, demonstrated the significance of point of nanobiocatalysts inclusion for the scale-up development of bioethanol production from potato peels.

Sustainable environmental management and related biofuel technologies

Environmental sustainability criteria and rising energy demands, exhaustion of conventional resources of energy followed by environmental degradation due to abrupt climate changes have shifted the attention of scientists to seek renewable sources of green and clean energy for sustainable development. Bioenergy is an excellent alternative since it can be applied for several energy-requirements after utilizing suitable conversion methodology. This review elucidates all aspects of biofuels (bioethanol, biodiesel, and butanol) and their sustainability criteria. The principal focus is on the latest developments in biofuel production chiefly stressing on the role of nanotechnology. A plethora of investigations regarding the emerging techniques for process improvement like integration methods, less energy-intensive distillation techniques, and bioengineering of microorganisms are discussed. This can assist in making biofuel-production in a real-world market more economically and environmentally viable.

Electrospinning Nanoparticles-Based Materials Interfaces for Sensor Applications

Electrospinning is a facile technique to fabricate nanofibrous materials with adjustable structure, property, and functions. Electrospun materials have exhibited wide applications in the fields of materials science, biomedicine, tissue engineering, energy storage, environmental science, sensing, and others. In this review, we present recent advance in the fabrication of nanoparticles (NPs)-based materials interfaces through electrospinning technique and their applications for high-performance sensors. To achieve this aim, first the strategies for fabricating various materials interfaces through electrospinning NPs, such as metallic, oxide, alloy/metal oxide, and carbon NPs, are demonstrated and discussed, and then the sensor applications of the fabricated NPs-based materials interfaces in electrochemical, electric, fluorescent, colorimetric, surface-enhanced Raman scattering, photoelectric, and chemoresistance-based sensing and detection are presented and discussed in detail. We believe that this study will be helpful for readers to understand the fabrication of functional materials interfaces by electrospinning, and at the same time will promote the design and fabrication of electrospun nano/micro-devices for wider applications in bioanalysis and label-free sensors.