Sustainable Process for the Synthesis of Value-Added Products Using Glycerol as a Useful Raw Material

Combined dehydrogenation of glycerol with catalytic transfer hydrogenation of H2 acceptors to chemicals: Opportunities and challenges

Catalytic transformation of low-cost glycerol to value-added lactic acid (LA) is considered as one of the most promising technologies for the upgradation of glycerol into renewable products. Currently, research studies reveal that anaerobic transformation of glycerol to LA could also obtain green H₂ with the same yield of LA. However, the combined value-added utilization of released H₂ with high selectivity of LA during glycerol conversion under mild conditions still remains a grand challenge. In this perspective, for the first time, we conducted a comprehensive and critical discussion on current strategies for combined one-pot/tandem dehydrogenation of glycerol to LA with catalytic transfer hydrogenation of H₂ acceptors (such as CO₂) to other chemicals. The aim of this overview was to provide a general guidance on the atomic economic reaction pathway for upgrading low-cost glycerol and CO₂ to LA as well as other chemicals.

A review on advances in green treatment of glycerol waste with a focus on electro-oxidation pathway

Over the past decades, research efforts are being devoted into utilizing the biomass waste as a major source of green energy to maintain the economic, environmental, and social sustainability. Specifically, there is an emerging consensus on the significance of glycerol (an underutilised waste from biodiesel industry) as a cheap, non-toxic, and renewable source for valuable chemicals synthesis. There are numerous methods enacted to convert this glycerol waste to tartronic acid, mesoxalic acid, glyceraldehyde, dihydroxyacetone, oxalic acid and so on. Among these, the green electro-oxidation technique is one of the techniques that possesses potential for industrial application due to advantages such as non-toxicity process, fast response, and lower energy consumption. The current review covers the general understanding on commonly used techniques for alcohol (C₁ & C₂) conversion, with a specific insight on glycerol (C₃) electro-oxidation (GOR). Since catalysts are the backbone of chemical reaction, they are responsible for the overall economy prospect of any processes. To this end, a comprehensive review on catalysts, which include noble metals, non-noble metals, and non-metals anchored over various supports are incorporated in this review. Moreover, a fundamental insight into the development of future electrocatalysts for glycerol oxidation along with products analysis is also presented.

A Review on Catalysts Development for Steam Reforming of Biodiesel Derived Glycerol; Promoters and Supports

In the last decades, environmental crises and increasing energy demand have motivated researchers to investigate the practical techniques for the production of clean fuels through renewable energy resources. It is essential to develop technologies to utilize glycerol as a byproduct derived from biodiesel. Glycerol is known as a sustainable and clean source of energy, which can be an alternative resource for the production of value-added chemicals and hydrogen. The hydrogen production via steam reforming (SR) of glycerol using Ni-based catalysts is one of the promising approaches for the entry of the hydrogen economy. The purpose of this review paper is to highlight the recent trends in hydrogen production over Ni-based catalysts using the SR of glycerol. The intrinsic ability of Ni to disperse easily over variable supports makes it a more viable active phase for the SR catalysts. The optimal reaction conditions have been indicated as 650–900 °C, 1 bar, and 15 wt% Ni in catalysts for high glycerol conversion. In this review paper, the effects of various supports, different promoters (K, Ca, Sr, Ce, La, Cr, Fe), and process conditions on the catalytic performance have been summarized and discussed to provide a better comparison for the future works. It was found that Ce, Mg, and La have a significant effect on catalytic performance as promoters. Moreover, SR of glycerol over hydrotalcite and perovskite-based catalysts have been reviewed as they suggest high catalytic performance in SR of glycerol with improved thermal stability and coke resistance. More specifically, the Ni/LaNi0.9Cu0.1O3 synthesized using perovskite-type supports has shown high glycerol conversion and sufficient hydrogen selectivity at low temperatures. On the other hand, hydrotalcite-like catalysts have shown higher catalytic stability due to high thermal stability and low coke formation. It is vital to notice that the primary concern is developing a high-performance catalyst to utilize crude glycerol efficiently.

Effect of support acidity during selective hydrogenolysis of glycerol over supported palladium-ruthenium catalysts

We report the role of the acidity of support during the selectivity hydrogenolysis of glycerol over supported bimetallic palladium-ruthenium (PdRu) catalysts. The PdRu nanoparticles were supported on a series of metal oxides and zeolitic supports via the modified impregnation method and tested for the liquid-phase hydrogenolysis of glycerol using gaseous hydrogen. The relative acid site densities of selected catalysts were determined by ammonia temperature-programmed desorption and pyridine desorption experiments. Based on these studies, we report a direct correlation between the catalytic activity (conversion and 1,2 propane diol yield) and two different acid sites (strong acid sites and very strong acid sites). Besides zeolite-supported catalysts, TiO₂ supported PdRu nanoparticles exhibit moderate catalytic activity; however, this catalyst shows high selectivity for the desired C-O bond cleavage to produce C3 products over the undesired C-C bond cleavage to produce < C3 products. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

A review on recent trends in reactor systems and azeotrope separation strategies for catalytic conversion of biodiesel-derived glycerol

The increasing demand for biodiesel (BD) as a renewable and sustainable energy source has impelled the generation of abundant and low-cost byproduct glycerol, which accounts for 10 wt% of total BD production and requires urgent utilization. The transesterification reaction, which utilizes glycerol and dimethyl carbonate (DMC) to synthesize valuable glycerol carbonate (GC) is an established reaction pathway to valorize oversupplied glycerol. Commercialization of inexpensive GC is constrained by the nature, stability, and basicity of applied catalyst, reaction conditions, types of the reactor system and separation methods of reaction products. This study presents a review and diversity of recent reports on reactor systems and DMC-methanol azeotrope separation strategies explored in GC synthesis from biodiesel-derived glycerol. Also, recent trends on heterogeneous catalysts, their performance, and the effects of reaction conditions were presented. Conducted studies revealed that the choice for reactor systems is constrained by factors such as energy consumption and operational safety and a significant mild reaction conditions could be realized using a microwave reactor. Furthermore, the reactive-extractive distillation and pervaporation processes showed high energy-efficiency and appreciable separation of DMC-methanol azeotrope. Thus, the development of stable catalyst and process intensification to fabricate an integrated reactor-separation system with high energy efficiency are fundamental and must be explored. This study portrays the recent research effort made in this direction and the limitations that require urgent attention.

PtRu/Zn3Ce1Ox catalysts with Lewis acid–base pairs show synergistic performances for the conversion of glycerol in the absence of externally added H2

Enhanced Lewis acid–base pairs and weaker PtRu–H hydride bonding synergistically enhance catalytic activity.

Development and functionalization of magnetic nanoparticles as stable and reusable catalysts for triacetin synthesis

Applications of magnetic nanoparticles as catalyst support has recently received great attention due to their unique properties, such as high surface area, ease of anchoring, high stability and ease of separation under an external field.

Low Temperature Dehydration of Glycerol to Acrolein in Vapor Phase with Hydrogen as Dilution: From Catalyst Screening via TPSR to Real-Time Reaction in a Fixed-Bed

Temperature programmed surface reaction (TPSR) was developed as a method for rapid screening of catalysts. In this study, a series of acid catalysts was screened for the low-temperature dehydration of glycerol to acrolein via TPSR. Results suggested that most catalysts show activity of glycerol conversion to acrolein at a greatly different temperature range. HY, SiO2 supported H4SiW12O40 (STA/SiO2), SO42−/ZrO2, and SO42−/TiO2 were observed to be efficient for the conversion of glycerol into acrolein at 210 °C, which was significantly lower than that generally reported (250–340 °C). Moreover, high selectivity of acrolein was gained at 85% and 86% over SiW/SiO2 and SO42−/TiO2, respectively. A new style catalyst, ZnCl2/SiO2, was also found to be highly selective to acrolein and evaluated in a conventional fixed-bed reactor. Especially, stability tests showed that the catalyst life was up to 300 h with no clear deactivation on ZnCl2/SiO2 with hydrogen as dilution.

Novel crude glycerol pretreatment for selective saccharification of sugarcane bagasse via fast pyrolysis

Pretreatment is a vital process for efficient saccharification and utilization of lignocellulose. In this study, crude glycerol derived from biodiesel production was used for pretreatment to facilitate selective saccharification via fast pyrolysis. Due to the efficient removal of alkali and alkaline earth metals (>95.0%) and lignin (79.4%) by crude glycerol pretreatment, the yield of levoglucosan was evaluated to 25.2% as compared to those from pure glycerol pretreated (14.4%) and untreated sugarcane bagasse (8.4%). Meanwhile, the production of inhibitors (e.g. acetic acid, phenol) to biocatalysts was also obviously inhibited from crude glycerol pretreated biomass. Consequently, this work provided a cost-effective and eco-friendly pretreatment mode, which could not only make full utilization of crude glycerol, but also improve the fermentability of lignocellulosic pyrolysate.