Research Progress on Stability of Solid Acid Catalysts

MOF-Derived Robust and Synergetic Acid Sites Inducing C-N Bond Disruption for Energy-Efficient CO2 Desorption

Amine-based scrubbing technique is recognized as a promising method of capturing CO₂ to alleviate climate change. However, the less stability and poor acidity of solid acid catalysts (SACs) limit their potential to further improve amine regeneration activity and reduce the energy penalty. To address these challenges, here, we introduce two-dimensional (2D) cobalt-nitrogen-doped carbon nanoflakes (Co-N-C NSs) driven by a layered metal-organic framework that work as SACs. The designed 2D Co-N-C SACs can exhibit promising stability, superhydrophilic surface, and acidity. Such 2D structure also contains well-confined Co-N₄ Lewis acid sites and -OH Brønsted acid sites to have a synergetic effect on C-N bond disruption and significantly increase CO₂ desorption rate by 281% and reduce the reaction temperatures to 88 °C, minimizing water evaporation by 20.3% and subsequent regeneration energy penalty by 71.7% compared to the noncatalysis.

Synthesis and characterization of novel hercynite@sulfuric acid and its catalytic applications in the synthesis of polyhydroquinolines and 2,3-dihydroquinazolin-4(1H)-ones

Herein, we report the synthesis of hercynite@sulfuric acid as a novel nanomagnetic solid acid catalyst, containing the sulfuric acid catalytic sites on the surface of hercynite MNPs as the catalytic support. The as-synthesized nanocomposite was meticulously characterized using a wide range of physicochemical techniques; including, FT-IR, XRD, EDX, X-ray-mapping, SEM and VSM analysis. The catalytic activity of this nanomagnetic material was considered for the synthesis of the diversely substituted polyhydroquinolines and 2,3-dihydroquinazolin-4(1H)-ones under solvent free conditions and also cyclocondensation reactions in ethanol, respectively affording good to excellent yields. Moreover, it is worth mentioning that the heterogeneity of the catalyst was measured through its excellent reusability and hot-filtration test.

Two-step preparation of Keggin-PW12@UIO-66 composite showing high-activity and long-life conversion of soybean oil into biodiesel

A polyoxometalate acid can be encapsulated into a metal-organic framework to construct a novel kind of solid-acid catalyst. In this work, the two-step method -high-temperature preparation of Zr₆O₄(OH)₄(CH₃COO)₁₂ and low-temperature self-assembly-has been adopted to synthesize the PW₁₂@UIO-66 composite (PW₁₂ = H₃PW₁₂O₄₀; UIO-66 = Zr₆O₄(OH)₄(OOC-C₆H₄-COO)₁₂). The as-synthesized PW₁₂@UIO-66 composite exhibits highly crystalline, good octahedron morphology, large specific surface area (1960 m² g^-1) and high thermal stability (>500 °C), which clearly demonstrates the potential as a solid-acid catalyst. Additionally, the PW₁₂@UIO-66 composite may be accomplished with 85% utilization of H₃PW₁₂O₄₀ and 95% yield through this synthetic procedure. The performances of the PW₁₂@UIO-66 composite are investigated by catalyzing the simultaneous transesterification and esterification of soybean oil into biodiesel. Under the optimal conditions, the conversion of the soybean oil into biodiesel would exceed 90% over the as-synthesized PW₁₂@UIO-66 composite. As the crucial indexes for industrial prospects, the recycling and life experiments were surveyed. After 10 times recycling and 4 weeks, the structure and performance of the PW₁₂@UIO-66 composite remained unchanged and in the meantime the PW₁₂@UIO-66 composite still maintained a high activity to convert soybean oil into biodiesel.

Sulfonic Acid-Functionalized Inorganic Materials as Efficient Catalysts in Various Applications: A Minireview

Acid catalysis is widely used in the chemical industry, and nowadays many efforts are being focused on replacing the more common homogeneous catalysts with heterogeneous ones in order to make greener the industrial processes. In this perspective, sulfonic solid acid materials represent a valid alternative to the homogenous mineral acid in several acid catalyzed reactions. In this minireview, an overview of the recent advances on the preparation, stability and application of these materials is reported. Special attention is addressed to the sustainability of the considered processes, starting from the catalyst’s preparation, the use of green solvents and reducing the possible reaction steps. Ways to tackle the main drawback represented by easy leaching of acid groups are described. For an easy catalyst recovery, the use of a magnetic core in a catalyst particle, with the related synthetic approaches, is also illustrated. Finally, a section is dedicated to the principal characterization techniques to identify the structural properties of the catalysts.

TiO2 Coating Strategy for Robust Catalysis of the Metal-Organic Framework toward Energy-Efficient CO2 Capture

High energy duty restricts the application of amine-based absorption in CO2 capture and limits the achievement of carbon neutrality. Although regenerating the amine solvent with solid acid catalysts can increase energy efficiency, inactivation of the catalyst must be addressed. Here, we report a robust metal-organic framework (MOF)-derived hybrid solid acid catalyst (SO42-/ZIF-67-C@TiO2) with improved acidity for promoting amine regeneration. The TiO2 coating effectively prevented the active components stripping from the surface of the catalyst, thus prolonging its lifespan. The well-protected Co-Nx sites and protonated groups introduced onto the TiO2 surface increased the amount and rate of CO2 desorption by more than 64.5 and 153%, respectively. Consequently, the energy consumption decreased by approximately 36%. The catalyzed N-C bond rupture and proton transfer mechanisms are proposed. This work provides an effective protection strategy for robust acid catalysts, thus advancing the CO2 capture with less energy duty.