Cellulase biocatalysis: key influencing factors and mode of action

Resource utilization of wastepaper and bentonite: Cu(II) removal in the aqueous environment

Contamination of heavy metals has always been a pressing concern. The dry-wet alternately treated carboxymethylcellulose bentonite (DW-CB) was successfully prepared by intercalating bentonite (BT) with carboxymethyl cellulose (CMC) obtained by solvent processes using enzymatically digested wastepaper as cellulosic raw material, and the adsorption capacity of Cu2+ on DW-CB in aqueous solution was investigated. A 98.18 ± 2.31 % removal efficiency was achieved by 4 g/L of DW-CB after 8 h in a solution containing 100 mg/L of Cu2+, which were 4.1 times and 1.5 times of that of BT and adsorbent prepared without alternating dry-wet process, respectively. The introduction of -COOH groups during the preparation of DW-CB enhanced the electrostatic interaction between DW-CB and Cu2+, which was the main driving force for Cu2+ removal. The pseudo-first-order kinetic model and Langmuir model better described the adsorption process and adsorption capacity of Cu2+ on DW-CB. DW-CB still showed high removal of Cu2+ (19.61 ± 0.99 mg/g) in the presence of multiple metal ions, while exhibiting the potential for removal of Zn2+, Mg2+ and K+, especially Mg2+ (22.69 ± 1.48 mg/g). However, the interactions of organics with Cu2+ severely affected the removal of Cu2+ by DW-CB (removal efficiency: 17.90 ± 4.17 % - 95.33 ± 0.27 %). In this study, an adsorbent with high targeted adsorption of Cu2+ was prepared by utilizing wastepaper and BT, which broadened the way of wastepaper resource utilization and had good economic and social benefits.

A critical review on biomass-based sustainable biorefineries using nanobiocatalysts: Opportunities, challenges, and future perspectives

Biocatalysts, including live microbial cells/enzymes, have been considered a predominant and advantageous tool for effectively transforming biomass into biofuels and valued biochemicals. However, high production costs, separation, and reusability limit its practical application. Immobilization of single and multi-enzymes by employing different nano-supports have gained massive attention because of its elevated exterior domain and high enzymatic performance. Application of nanobiocatalyst can overcome the drawbacks mainly, stability and reusability, thus reflecting the importance of biomass-based biorefinery to make it profitable and sustainable. This review provides an in-depth, comprehensive analysis of nanobiocatalysts systems concerning nano supports and biocatalytic performance characteristics. Furthermore, the effects of nanobiocatalyst on waste biomass to biofuel and valued bioproducts in the biorefinery approach and their critical assessment are discussed. Lastly, this review elaborates commercialization and market outlooks of the bioconversion process using nanobiocatalyst, followed by different strategies to overcome the limitations and future research directions on nanobiocatalytic-based industrial bioprocesses.

CalkGH9T: A Glycoside Hydrolase Family 9 Enzyme from Clostridium alkalicellulosi

Glycoside hydrolase family 9 (GH9) endoglucanases are important enzymes for cellulose degradation. However, their activity on cellulose is diverse. Here, we cloned and expressed one GH9 enzyme (CalkGH9T) from Clostridium alkalicellulosi in Escherichia coli. CalkGH9T has a modular structure, containing one GH9 catalytic module, two family 3 carbohydrate binding modules, and one type I dockerin domain. CalkGH9T exhibited maximal activity at pH 7.0–8.0 and 55 °C and was resistant to urea and NaCl. It efficiently hydrolyzed carboxymethyl cellulose (CMC) but poorly degraded regenerated amorphous cellulose (RAC). Despite strongly binding to Avicel, CalkGH9T lacked the ability to hydrolyze this substrate. The hydrolysis of CMC by CalkGH9T produced a series of cello-oligomers, with cellotetraose being preferentially released. Similar proportions of soluble and insoluble reducing ends generated by hydrolysis of RAC indicated non-processive activity. Our study extends our knowledge of the molecular mechanism of cellulose hydrolysis by GH9 family endoglucanases with industrial relevance.

Screening of cellulolytic bacteria from rotten wood of Qinling (China) for biomass degradation and cloning of cellulases from Bacillus methylotrophicus

BACKGROUND

Cellulosic biomass degradation still needs to be paid more attentions as bioenergy is the most likely to replace fossil energy in the future, and more evaluable cellulolytic bacteria isolation will lay a foundation for this filed. Qinling Mountains have unique biodiversity, acting as promising source of cellulose-degrading bacteria exhibiting noteworthy properties. Therefore, the aim of this work was to find potential cellulolytic bacteria and verify the possibility of the cloning of cellulases from the selected powerful bacteria.

RESULTS

In present study, 55 potential cellulolytic bacteria were screened and identified from the rotten wood of Qinling Mountains. Based on the investigation of cellulase activities and degradation effect on different cellulose substrates, Bacillus methylotrophicus 1EJ7, Bacillus subtilis 1AJ3 and Bacillus subtilis 3BJ4 were further applied to hydrolyze wheat straw, corn stover and switchgrass, and the results suggested that B. methylotrophicus 1EJ7 was the most preponderant bacterium, and which also indicated that Bacillus was the main cellulolytic bacteria in rotten wood. Furthermore, scanning electron microscopy (SEM) and X-ray diffraction analysis of micromorphology and crystallinity of wheat straw also verified the significant hydrolyzation. With ascertaining the target sequence of cellulase β-glucosidase (243 aa) and endoglucanase (499 aa) were successfully heterogeneously cloned and expressed from B. methylotrophicus 1EJ7, and which performed a good effect on cellulose degradation with enzyme activity of 1670.15 ± 18.94 U/mL and 0.130 ± 0.002 U/mL, respectively. In addition, based on analysis of amino acid sequence, it found that β-glucosidase were belonged to GH16 family, and endoglucanase was composed of GH5 family catalytic domain and a carbohydrate-binding module of CBM3 family.

CONCLUSIONS

Based on the screening, identification and cellulose degradation effect evaluation of cellulolytic bacteria from rotten wood of Qinling Mountains, it found that Bacillus were the predominant species among the isolated strains, and B. methylotrophicus 1EJ7 performed best on cellulose degradation. Meanwhile, the β-glucosidase and endoglucanase were successfully cloned and expressed from B. methylotrophicus for the first time, which provided new materials of both strain and the recombinant enzymes for the study of cellulose degradation and its application in industry.

Enrichment of thermophilic and mesophilic microbial consortia for efficient degradation of corn stalk

Six different environmental samples were applied to enrich microbial consortia for efficient degradation of corn stalk, under the thermophilic and mesophilic conditions. The consortium obtained from anaerobic digested sludge under thermophilic condition (TC-Y) had the highest lignocellulose-degrading activity. The CO₂ yield was 246.73 mL/g VS in 23 days, meanwhile, the maximum CO₂ production rate was 15.48 mL/(CO₂·d), which was 28.75% and 52.27% higher than that under mesophilic condition, respectively. The peak value of cellulase activity reached 0.105 U/mL, which was at least 34.61% higher than the other groups. In addition, 49.5% of corn stalk was degraded in 20 days, moreover, the degradation ratio of cellulose, hemicellulose and lignin can reach 52.76%, 62.45% and 42.23%, respectively. Microbial consortium structure analysis indicated that the TC-Y contained the phylum of Gemmatimonadetes, Acidobacteria, Chloroflexi, Planctomycetes, Firmicutes, and Proteobacteria. Furthermore, the Pseudoxanthomonas belonging to GammaProteobacteria might be the key bacterial group for the lignocellulose degradation. These results indicated the capability of degrading un-pretreated corn stalk and the potential for further investigation and application of TC-Y.

Immobilization of cellulase in the non-natural ionic liquid environments to enhance cellulase activity and functional stability

Ionic liquids (ILs) have been applied as an environmentally friendly solvent in the pretreatment of lignocellulosic biomass for more than a decade. The ILs involved pretreatment processes for cellulases mediated saccharification lead to both the breakdown of cellulose crystallinity and the decrease of lignin content, thereby improving the solubility of cellulose and the accessibility of cellulase. However, most cellulases are partially or completely inactivated in the presence of even low amount of ILs. Immobilized cellulases are found to perform improved stability and higher apparent activity in practical application compared with its free counterparts. Enzyme immobilization therefore has become a promising way to relieve the deactivation of cellulase in ILs. Various immobilization carriers and methods have been developed and achieved satisfactory results in improving the stability, activity, and recycling of cellulases in IL pretreatment systems. This review aims to provide detailed introduction of immobilization methods and carrier materials of cellulase, including natural polysaccharides, synthetic polymers, inorganic materials, magnetic materials, and newly developed composite materials, and illustrate key methodologies in improving the performance of cellulase in the presence of ILs. Especially, novel materials and concepts from the recently representative researches are focused and discussed comprehensively, and future trends in immobilization of cellulases in non-natural ILs environments are speculated in the end.

Study on the Interaction Between Cellulase and Surfactants

The conformations of secondary and tertiary structures of cellulase in the presence of eleven commonly used surfactants were determined by Raman spectroscopy and the results were discussed. The results indicated that anionic surfactants had a stronger influence on the cellulase conformations than nonionic surfactants. Thus anionic surfactants showed a stronger inactivation on the cellulase activity. Furthermore, Zeta potential distributions of cellulase in solutions of surfactants were tested by Dynamic Light Scattering (DLS). The DLS results indicated that the interaction between anionic surfactants and cellulase was attributed to electrostatic attraction. By adding cellulase to a liquid, non-cellulase-containing detergent, the detergency of the liquid detergent could be increased. Further studies on the sample swatches by optical microscopy and scanning electron microscopy (SEM) were undertaken in this paper.

Effects of lignin and surfactant on adsorption and hydrolysis of cellulases on cellulose

BACKGROUND

Considerable works have been reported concerning the obstruction of enzymatic hydrolysis efficiency by lignin. However, there is a lack of information about the influence of lignin on the adsorption of cellulases on cellulose, along with the hydrolytic activity of the cellulases adsorbed on lignin. In addition, limited discovery has been reported about the influence of additives on cellulase desorption from lignin and lignocellulosic materials. In this work, the effects of lignin on cellulase adsorption and hydrolysis of Avicel were investigated and the effects of Tween 80 on cellulases adsorption and desorption on/from lignin and corn stover were explored.

RESULTS

The results showed that the maximum adsorption capacity of Avicel reduced from 276.9 to 179.7 and 112.1 mg/g cellulose with the addition of 1 and 10 mg lignin per gram Avicel, which indicated that lignin adsorbed on Avicel reduced surface area of cellulose and lignin available for cellulases. Cellulases adsorbed on lignin could be released by reaching new adsorption equilibrium between lignin and supernatants. In addition, cellulases desorbed from lignin still possess hydrolytic capacity. Tween 80 could adsorb onto both lignin and corn stover, and reduce the cellulase adsorption on them. Furthermore, Tween 80 could enhance desorption of cellulases from both lignin and corn stover, which might be due to the competitive adsorption between cellulases and Tween 80 on them.

CONCLUSIONS

The presence of lignin decreased the maximum adsorption capacity of cellulases on cellulose and the cellulases adsorbed on lignin could be released to supernatant, exhibiting hydrolytic activity. Tween 80 could alleviate the adsorption of cellulases and enhanced desorption of cellulases on/from lignin and corn stover. The conclusions of this work help us further understanding the role of lignin in the reduction of adsorption of cellulases on substrates, and the function of additives in cellulases adsorption and desorption on/from lignin and substrates.