Monitoring the performances of a real scale municipal solid waste composting and a biodrying facility using respiration activity indices

Aerobic Biostabilization of the Organic Fraction of Municipal Solid Waste-Monitoring Hot and Cold Spots in the Reactor as a Novel Tool for Process Optimization

The process of aerobic biostabilization (AB) has been adopted for treatment of the organic fraction of municipal solid waste (OFMSW). However, thermal gradients and some side effects in the bioreactors present difficulties in optimization of AB. Forced aeration is more effective than natural ventilation of waste piles, but “hot and cold spots” exist due to inhomogeneous distribution of air and heat. This study identified the occurrence of hot and cold spots during the OFMSW biostabilization process at full technical scale. It was shown that the number of hot and cold spots depended on the size of the pile and aeration rate. When the mass of stabilized waste was significantly lower and the aeration rate was two-fold higher the number of anaerobic hot spots decreased, while cold spots increased. In addition, the results indicated that pile construction with sidewalls decreased the number of hot spots. However, channelizing the airflow under similar conditions increased the number of cold spots. Knowledge of the spatial and temporal distribution of process gases can enable optimization and adoption of the OFMSW flow aeration regime. Temperature monitoring within the waste pile enables the operator to eliminate undesirable “hot spots” by modifying the aeration regime and hence improve the overall treatment efficiency.

The influence of bio-plastics for food packaging on combined anaerobic digestion and composting treatment of organic municipal waste

The use of bio-plastic-based packaging as an alternative to conventional plastic packaging is increasing. Among the plethora of different bio-based plastics, the most relevant ones are those that, at the end of their life, can be treated with the organic fraction of municipal solid waste. Even in these cases, their impact on the waste processing and recycling is not always positive. This study aim to assess on a laboratory scale the influence on combined anaerobic digestion and composting industrial processes of a bio-based plastic film, namely cellulose acetate (CA), in pure and modified (additions of additive) forms. CA films were mixed with organic waste and subjected to: (i) anaerobic digestion; (ii) active composting and (iii) two stages of curing composting. Anaerobic digestion and composting were monitored through methane yield and oxygen uptake respectively; additionally, the bio-plastics degree of disintegration was assessed during all the processes. The final disintegration of pure and modified CA was 73.82% and 54.66%, respectively. Anaerobic digestion contributes to the disintegration of the material, while aerobic treatment appears to be nearly ineffective, especially for modified CA. The presence of cellulose acetate during anaerobic digestion of food waste increased the methane yield by about 4.5%. Bioassay confirmed the absence of possible toxic effects on the final compost from the bio-plastic treatment. Although bio-based materials are not the only solution to plastic pollution, the findings confirm the need to upgrade the organic waste treatment plants and the necessity to revise the requirements for the use of compost in agriculture.

Toxicity and physicochemical parameters of composts including distinct residues from agribusiness and slaughterhouse sludge

Composting is useful for treatment of residues from agribusiness, but the potential toxicity of the final compost should be evaluated before its agricultural destination. The objective of this study was to evaluate the physicochemical characteristics and the toxicity of agribusiness residues using onion seeds as bioindicators. All tested treatments were composed by sludge from a swine slaughterhouse and sawdust. Besides the control, which included no additional materials, the other treatments included aviary bedding, rice husk and residue from tobacco industries as structuring materials. After 120 days of composting, for all treatments, the temperature inside the composting piles approached the environmental temperature, the physicochemical parameters indicated that the composts were stabilized and, except for the treatment including tobacco residues, that could be used for agriculture without impairing plant germination. Although the treatments including tobacco residues and rice husk showed evidence of cytotoxicity and genotoxicity at the beginning of the composting period, that was not observed for the treatment including aviary bedding. Such potential toxicity was not observed at the end of composting for any of the tested treatments.

The Biological Drying of Municipal Waste in an Industrial Reactor—A Case Study

One of the methods of municipal solid waste (MSW) treatment is biodrying. The literature describes mainly the results obtained in a laboratory- and a pilot-scale reactor. The manuscript presents the results of MSW treatment in a full-scale bio-drying reactor (150 m3). The reactor is operated in one of the Polish installations specializing in mechanical-biological treatment (MBT). During the 14 day period of biodrying in the reactor, the parameters of MSW such as the moisture, temperature, loss on ignition (LOI), and net heating value (NHV) were examined. The temperature of the air in the reactor was also examined. The research also included changes in the above-mentioned parameters of MSW located in three parts of the reactor: the front, middle, and back. The test results showed that the moisture content of the waste decreased from the initial level of 55% to the level of 30%. This was accompanied by an increase in the NHV from 6.3 MJ kg−1 to 9.6 MJ kg−1. At the same time, the LOI decreased from 68% d.m. to 45% d.m. The LOI decrease is not favorable from the point of view of using MSW as refuse-derived fuel (RDF), as was expected in the final usage stage. The results have application value as the plant operator, having at their disposal the controlling of the reactor’s ventilation and the temperature inside the reactor, should select the speed of the moisture removal from MSW at such a level as to minimize the LOI decrease.

Aeration requirement and energy consumption of reactor-composting of rose pomace influenced by C/N ratio

As the composting industry develops rapidly in the world, the compost producers have focused on the efficiency of energy utilization in production without restricting the quality of compost in the forced ventilation systems. Therefore, this experimental study quantified the impacts of initial C/N ratio on aeration requirement and energy consumption due to aeration for reactor composting of rose pomace through kinetics of the process using fifteen 100-l composting reactors. The results of the study showed that initial C/N ratio significantly affected decomposition rate, compost maturity, and dry matter losses and organic matter losses (P < 0.05). The maximum decomposition rate (0.072 day^-1) and the highest degree of progression of the composting process existed at the mixture with initial C/N ratio of 24.26. The results underlined the importance of the initial C/N of composting of rose pomace in terms of energy consumption due to aeration. In particular, more mature compost within a short time can be obtained when composting was operated with a C/N ratio of 23.7-25.8 in the expense of requiring more airflow rate, fan power, and energy consumption by aeration fan per composting material.

Environmental and economic assessment of the use of biodrying before thermal treatment of municipal solid waste

Mass-burn incineration is a thermal treatment process for municipal solid waste (MSW) that is commonly applied worldwide. MSW can be sometimes pretreated prior to incineration to increase its calorific value. Biodrying is lately widely applied to MSW as a pretreatment process prior to incineration to produce a RDF of higher calorific value compared to raw commingled MSW. However, no information exists on the assessment of the overall environmental emissions and energy consumption of the combined biodrying-incineration process. Therefore, the goal of this work was to estimate the overall viability of biodrying prior to incineration by accounting for the greenhouse gas emissions, net energy balance and total cost. These parameters were compared to the corresponding parameters of the direct mass-incineration of MSW without any pretreatment. The study developed four scenarios that included mass-incineration alone and incineration of biodried waste. Additional scenarios were developed to include transport of waste to a distance of 100 km. Results revealed that direct mass-incineration led to slightly lower overall greenhouse gas emissions compared to incineration of biodried MSW, primarily due to the consumption of electricity during the preceding biodrying stage (because of the required aeration) and the direct emissions of biodrying. In addition, a 5% less overall energy consumption was calculated during mass-incineration, compared to incineration of biodried RDF, while the net cost was also lower in the case of the mass-incineration compared to the RDF based incineration.

Abundance of ammonia-oxidizing bacteria and archaea under different ventilation strategies during cattle manure composting

Composting of cattle manure was conducted under four ventilation strategies, i.e., no-aeration (A-00), continuous aeration (B-44), non-aeration for 14 d and then aeration for 42 d (C-04), aeration for 14 d and then no-aeration for 42 d (D-40). Physicochemical parameters and potential ammonia oxidation (PAO) indicated that continuous and intermittent ventilation provide favourable conditions for ammonia-oxidizing bacteria (AOB) and archaea (AOA) to oxidize ammonia. Quantitative PCR (qPCR) analysis showed AOB amoA gene abundance of all treatments on every sampling day ranged from 2.25 × 10⁵ to 2.76 × 10⁹copies/g, was significantly lower than that of archaeal amoA gene from 2.71 × 10⁸ to 9.05 × 10¹¹copies/g. There was also a significantly positive relationship between PAO rates and AOB (r² ≥ 0.066, p < 0.05) and AOA (r² ≥ 0.300, p < 0.05) abundance. These data suggested that ammonia oxidation is driven by both AOA and AOB in cattle manure composting.

Co-composting of vegetable wastes and carton: Effect of carton composition and parameter variations

The aim of the study was to investigate the effects of carton in the composting process of mixed vegetable wastes using an experimental composter of capacity 80L. Three different mixes were set-up (Mixes 1, 2 and 3) which consisted of vegetable wastes, 2.0kg paper and bulking agents, vegetable wastes, 1.5kg carton and bulking agents, vegetable wastes, 4.5kg carton and bulking agents, respectively. Temperature evolution, pH trends, moisture levels, respiration rates, percentage volatile solids and electrical conductivity were monitored for a period of 50days. The system remained under thermophilic conditions for a very short period due to the small size of the reactor. The three mixes did not exceed a temperature of 55°C, where sanitization takes place by the destruction of pathogens. The highest peak of CO₂ evolution was observed in Mix 2 indicating that maximum microbial degradation took place in that mix.