In situ generation of hydroxyl radical for efficient degradation of 2,4-dichlorophenol from aqueous solutions

Synergistic potency of ultrasound and solar energy towards oxidation of 2,4-dichlorophenol: a chemometrics approach

Industrial units based on chemical processes-the textile and paper industries-are major sources of chlorophenols in the environment, and chlorophenolic compounds persist within the environment for a long time with high toxicity levels. The photo-assisted Fenton's and photocatalysis processes were investigated for the degradation of chlorophenols in the present study. Response surface methodology was employed to get optimised conditions for photocatalysis and photo-Fenton process-governing factors, thus, yielding a profound removal efficiency. Under optimised conditions, with a photocatalyst dose of 0.2 g/L, oxidant concentration of 10.0 mM and pH 5.0, complete removal of 2,4-dichlorophenol (2,4-DCP) was observed in 210 minutes in photocatalytic treatment. In the case of the photo-Fenton process, at an H2O2 dose of 5.0 mM and Fe2+ concentration of 0.5 mM, the organic pollutant was eliminated within 5 minutes of reaction time under acidic conditions (pH 3.0). The RSM model reported the perfect fit of experimental data with the predicted response. Among different isotherm models, the Langmuir isotherm was the best fit. The process followed pseudo-first order rate kinetics among various kinetics models. For the obtained optimised conditions, sonication and solar energy-driven processes were incorporated to study enhanced mineralisation. The solar-assisted Fenton process reported maximum mineralisation (90%) and cost-effective ($0.01/litre for 100 mg/L 2,4-DCP) treatment among different hybrid oxidation processes. The work provides insight into harnessing the naturally available solar energy, reducing the overall treatment cost and opting for a sustainable treatment method.

Comprehensive understanding of electrochemical treatment systems combined with biological processes for wastewater remediation

The presence of toxic pollutants in wastewater discharge can affect the environment negatively due to presence of the organic and inorganic contaminants. The application of the electrochemical process in wastewater treatment is promising, specifically in treating these harmful pollutants from the aquatic environment. This review focused on recent applications of the electrochemical process for the remediation of such harmful pollutants from aquatic environments. Furthermore, the process conditions that affect the electrochemical process performance are evaluated, and the appropriate treatment processes are suggested according to the presence of organic and inorganic contaminants. Electrocoagulation, electrooxidation, and electro-Fenton applications in wastewater have shown effective performance with high removal rates. The disadvantages of these processes are the formation of toxic intermediate metabolites, high energy consumption, and sludge generation. To overcome such disadvantages combined ecotechnologies can be applied in large-scale wastewater pollutants removal. The combination of electrochemical and biological treatment has gained importance, increased removal performance remarkably, and decreased operational costs. The critical discussion with depth information in this review could be beneficial for wastewater treatment plant operators throughout the world.

Efficacious One-pot Synthesis of 2-thiazolines and 2-oxazolines Under Solvent and Metal-Free Conditions

Background:

2-oxazolines and 2-thiazolines are important heterocycles due to their extensive applications in chemistry, biochemistry, and pharmacology. Most of the precedent methods for preparing these heterocycles involve one or more drawbacks, including harsh reaction conditions, long reaction times, low yields of products, high temperature, and toxic solvents.

Objective:

The aim of this study was to develop a new and eco-efficient method for the preparation of 2-oxazolines and 2-thiazolines.

Methods:

Amino alcohols were condensed with nitriles in a sealed tube under solvent-free and metal- free conditions.

Results:

Our procedure appears to be highly eco-efficient and promotes quantitative access to 2-oxazolines and 2-thiazolines using simple and minimum manipulation.

Conclusion:

This simple approach allows high conversion for different nitriles yielded from 78 to 99% and easy isolation of the targeted products without further purification. To the best of our knowledge, our procedure is the most efficient and fast method reported to date in terms of chemical yields, number of steps, and atom economy.

A novel strategy for enhancing heterogeneous Fenton degradation of dye wastewater using natural pyrite: Kinetics and mechanism

Hydrogen peroxide activation by pyrite for degradation of recalcitrant contaminants receives increasing attention. The improvement of catalytic efficiency of natural pyrite is still a challenging issue. This work provides a novel strategy of enhancing catalytic efficiency via pre-reaction between pyrite and hydrogen peroxide. Effects of process factors including pre-reaction time, hydrogen peroxide, solution pH and initial dye concentration were examined. Natural pyrite with low purity was characterized by Raman, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Reaction kinetic verifies tremendous improvement of the reaction rate through pre-reaction. Enhanced dye degradation is ascribed to hydroxyl radical production promoted by self-regulation of pH, Fe²⁺ releasing and Fe²⁺/Fe³⁺ cycle. The plausible mechanism was proposed based on multiple determinations. Dye degradation in different water matrix was efficiently obtained, as well as multicomponent dyes. Additionally, broad operation pH and good reusing performance make the developed process highly attractive for application. This work provides a solid step-forward of pyrite/hydrogen peroxide Fenton process for treatment of recalcitrant contaminants in wastewater.

Iron-modified activated carbon derived from agro-waste for enhanced dye removal from aqueous solutions

Background and aim

Finding a cost-effective adsorbent can be an obstacle to large-scale applications of adsorption. This study used an efficient activated carbon adsorbent based on agro-waste for dye removal.

Methods

Pistachio shells as abundant local agro-wastes were used to prepare activated carbon. Then, it was modified with iron to improve its characteristics. Acid red 14 was used as a model dye in various conditions of adsorption (AR14 concentration 20–150 mg L⁻¹, pH 3–10, adsorbent dosage 0.1–0.3 g L⁻¹, and contact time 5–60 min).

Results

A mesoporous adsorbent was prepared from pistachio shells with 811.57 m² g⁻¹ surface area and 0.654 cm³ g⁻¹ pore volume. Iron modification enhanced the characteristics of activated carbon (surface area by 33.3% and pore volume by 64.1%). Adsorption experiments showed the high effectiveness of iron-modified activated carbon for AR14 removal (>99%, >516 mg g⁻¹). The adsorption followed the pseudo-second kinetic model (k = 0.0005 g mg⁻¹ min⁻¹) and the Freundlich isotherm model (K_f = 152.87, n = 4.61). Besides, the reaction occurred spontaneously (ΔG⁰ = −36.65 to −41.12 kJ mol⁻¹) and was exothermic (ΔH⁰ = −41.86 kJ mol⁻¹ and ΔS⁰ = −3.34 J mol⁻¹ K⁻¹).

Conclusion

Iron-modified activated carbon derived from pistachio shells could be cost-effective for the treatment of industrial wastewater containing dyes.

Electrocatalytic removal of fluroquinolones from simulated pharmaceutical effluent: Chemometric analysis, chemical blueprint of electrodes and generated sludge

Electrocatalytic removal of fluroquinolones from simulated pharmaceutical effluent is studied in this work. The effects of parameters like NaCl concentration, pH and initial concentration of Ofloxacin were studied. The synergistic effect of H₂O₂ on the degradation of Ofloxacin paves the way to move towards radical based chemistry. The process was modelled and statistically evaluated through Central Composite Design approach towards the maximum concentration of Ofloxacin degraded (for 0.8 mM) as 0.46 mM at pH-3.0 and the concentration of H₂O₂ at 0.2 mM. The model was analyzed mathematically and observed as saddle response based on canonical and ridge analysis. The process follows pseudo first order kinetics with k = 0.047 min^-1 and reaction rate of 13.6 mg.L^-1.min^-1. The mineralization efficiency of the process was studied using Total Organic Carbon analysis and 76.5% removal efficiency was obtained on the simulated pharmaceutical effluent containing Ofloxacin, Ciprofloxacin and Norfloxacin. The crystal structure of the green and red colour sludge was determined by XRD to be lepidocrocite (a = 3.87 Å, b = 12.4 Å, c = 3.06 Å) and gupeiite (a = 5.6620 Å), respectively. The elemental composition of sludge and electrodes were found using SEM-EDX. Morphological change in electrode surface was determined using roughness plot.

Role of identified bacterial consortium in treatment of Quhafa Wastewater Treatment Plant influent in Fayuom, Egypt

This study was aimed to biologically treat domestic wastewater using identified bacterial consortium for chemical pollutants removal by treating/passing it through sand biofilters. The identification, toxicity test, and the optimum dose of the investigated bacterial consortium were carried out using Microtox analyzer and Batch biological treatment, respectively. Furthermore, application of sedimentation followed by gravel and sand biofilters for wastewater treatment was evaluated. The results showed that the bacterial consortium is composed of Pediococcus acidilactici, Pediococcus pentosaceus, Lactobacillus plantarum, and Bacillus subtilis. The optimum dose for wastewater treatment within 6 h of contact time is 2.5 mg/L, this dose (2.5 mg/L) has no toxic effect. The removal percentage of chemical oxygen demand (COD), biological oxygen demand (BOD), total solids (TS), total dissolved solids (TDS), total suspended solids (TSS), ammonia, nitrate, total Kjeldahl nitrogen (TKN), and oil and grease reached 93.4, 83.5, 37.5, 49.2, 93.4, 100, 55.7, 76.6, and 76% in the effluent of the treated wastewater, respectively after the third sand biofilter filtration. It can be concluded that using bacterial consortium for domestic wastewater treatment could be a good tool for chemical pollutants removal. Moreover, this study provides low cost and eco-friendly tool for domestic wastewater treatment using simple multistage biofilters based on an identified bacterial consortium. This system can be upscaled for the treatment of larger volumes of wastewater.

Optimization of treating phenol from wastewater through the TiO2-catalyzed advanced oxidation process and response surface methodology

The use of dispersed catalysts in aqueous medium inside reactors in advanced oxidative processes is common among researchers. However, due to the difficult separation of these species after treatment, in many cases, the treatment process is unfeasible. In this context, the main target of the work was the evaluation of degradation of the phenolic solution by ozonation titanium dioxide (TiO₂/P25), supported on zeolite spheres. The process was investigated through the response surface methodology (RSM) and optimized by the generalized reduced gradient (GRG) algorithm. The effects of various operating parameters including pH, power ozone (O₃) generation, flow rate, and treatment time were investigated, using as a response to removal of chemical oxygen demand (COD). It was made in optimum conditions the ratio of biochemical oxygen demand (BOD)/chemical oxygen demand to check the increasing biodegradability, aiming ozonation as preliminary treatment, with the possibility of subsequent biological treatments. There was an increase in this ratio from 0.17 to 0.50 in 48 min, which would facilitate the use of the subsequent biological process. The proposed model showed good fit to the experimental data with R² and R²_adj correlation coefficients of 0.9964 and 0.9932, respectively.

Crossflow electrochemical filtration for elimination of ibuprofen and bisphenol a from pure and competing electrolytic solution conditions

For the first time, a crossflow electrochemical filtration system containing multiwalled carbon nanotubes (MWNTs) blended with buckypaper as a flat sheet dual membrane electrode was investigated for the removal of two contaminants of emerging concern, Ibuprofen and Bisphenol A. Breakthrough experiments revealed that a crossflow configuration could be highly efficient in eliminating both contaminants at applied DC potentials of 2 and 3 V over an extended period, from pure salt electrolyte as well as from synthetic secondary wastewater effluent. The shear flow provided consistent surface coverage resulting in excellent sorption performance. The long residence time of the two contaminants within the membrane (18.3 s) was sufficient enough to allow for almost complete degradation of phenolic aromatic products and quinoid rings and the resulting formation of aliphatic carboxylic acids, which was more evident at a higher applied potential (3 V). The formation of the non-toxic aliphatic carboxylic acids is a clear indication of the superior electrochemical performance of the crossflow mode over the dead-end flow-through system. Moreover, this study provides an in-depth understanding of different factors such as filter surface area and residence time that can greatly affect the removal of the contaminants considered.

Preparation of chitosan/Co-Fe-layered double hydroxides and its performance for removing 2,4-dichlorophenol

Chitosan/Co-Fe-layered double hydroxides (CS/LDHs) were prepared by coprecipitation method, which is a kind of composite material with excellent properties. The structure of CS/LDHs was characterized by SEM, FTIR, and XRD, which proved that chitosan (CS) was successfully induced into hydrotalcite and CS/LDHs still possess the structural characteristics of hydrotalcite. The adsorption of 2,4-dichlorophenol (2,4-DCP) was studied with CS/LDHs and LDHs as adsorbent separately. The activity of immobilized laccase (L-CS/LDHs) with CS/LDHs as carrier is significantly better than that of the one (L-LDHs) using LDHs as carrier. Under the optimum conditions (pH = 6, 55 °C, 48 h), L-CS/LDHs exhibited better removal performance for 2,4-DCP (81.53%, 100 mg/L) than LDHs (63.55%); the removal of 2,4-DCP by L-CS/LDHs is excellent, exceeding 97% as its initial concentration below 60 mg/L. It includes the catalytic action of laccase and dechlorination of Fe³⁺ and Co²⁺, and the adsorption can be ignored under the optimal conditions. After 5 cycles, it maintained 67% (L-CS/LDHs) and 54% (L-LDHs) of the original removal.

Comparison of wastewater treatment plants based on the emissions of microbiological contaminants

This article presents the current and important results of bioaerosol studies which allow for the comparison of microbial contamination of air in 11 wastewater treatment plants (WWTPs), which differed in terms of capacity from 350 to 200,000 m³/day. The abundance of mesophilic bacteria, M+ and M- Staphylococcus, Pseudomonas fluorescens, Actinobacteria, coliform and psychrophilic bacteria, and microscopic fungi was determined. Additionally, the air temperature, relative humidity, wind velocity, and direction were also analyzed at each research station. The obtained very numerous results of bioaerosol and climate parameter studies were subjected to statistical analysis. The results regarding the minimum, maximum, and median abundance of the studied bacteria and microscopic fungi at 11 WWTPs and in background studies at control stations were presented in tables. Additionally, basic descriptive statistics for all studied microorganisms at specific seasons were presented. It was established that at the areas of WWTPs, the microscopic fungi were present that the highest concentrations (ranging from 0 to 1,148,530 CFU m^-3), followed by psychrophilic bacteria (ranging from 40 to 225,000 CFU m^-3) and mesophilic bacteria (ranging from 0 to 195,000 CFU m^-3). The novel elaboration of bioaerosol study results based on cluster analysis and determination of a dendrogram allowed to compare the studied WWTPs. The similarity was decided based on the type of studied microorganisms and their dominance and abundance, while no similarities were observed in terms of capacity. In order to investigate the relation between the abundance of bacterial groups as well as microscopic fungi and microclimatic parameters (air temperature and humidity), a calculation of Spearman's range correlation coefficients was conducted.