An accurate and sensitive analytical strategy for the determination of palladium in aqueous samples: slotted quartz tube flame atomic absorption spectrometry with switchable liquid-liquid microextraction after preconcentration using a Schiff base ligand

Selective Fe(ii)-fluorescence sensor with validated two-consecutive working range using N,S,I-GQDs associated with garlic extract as an auxiliary green chelating agent

The goal of this work was to use the pyrolysis process to synthesize graphene quantum dots doped with garlic extract (as N,S-GQDs) and simultaneously co-doped with iodine (as I-GQDs). XPS, HR-TEM, FE-SEM/EDX, FT-IR, fluorescence, and UV-visible absorption spectroscopy were used to characterize the N,S,I-GQDs and analyze their morphological images. The quantum yield of N,S,I-GQDs was found to be 45%, greater than that of undoped GQDs (31%). When stimulated at 363 nm, the N,S,I-GQDs display a strong fluorescence intensity at a maximum wavelength of 454 nm. Using N,S,I-GQDs as a fluorescence quenching sensor for screening tests with various metal ions, it was discovered that they are extremely selective towards Fe2+ over Fe3+ and other ions. Thus, solution pH, concentration of N,S,I-GQDs, quantity of garlic extract, EDTA and AgNO3 concentration as masking agents, reaction duration under ultrasonic aid, and tolerable limit of Fe3+ presence in the target analyte were all optimized for Fe2+ detection. A highly sensitive detection of Fe2+ was obtained using a linear curve with y = 141.34x + 5.5855, R 2 = 0.9961, LOD = 0.11 mg L-1, and LOQ = 0.35 mg L-1. The method precision, given as RSDs, was determined to be satisfactory at 1.04% for intra-day analysis and 3.22% for inter-day analysis, respectively. As a result, the selective determination of trace amounts of Fe2+ in real water samples using such labile multi-element doped GQDs in conjunction with garlic extract as a green chelating agent to maintain its enhanced sensitivity was successfully applied with good recoveries ranging from 89.16 to 121.45%.

Quantification of palladium in wastewater samples by matrix-matching calibration strategy assisted deep eutectic solvent based microextraction

An efficient, sensitive, and easy deep eutectic solvent based (DESb) liquid phase microextraction (LPME) method was developed to preconcentrate palladium for quantification at trace level by a flame atomic absorption spectrometry (FAAS) system, equipped with a lab made slotted quartz tube (SQT). All parameters of the DESb-LPME-SQT-FAAS system were optimized to lower the detection limit of the system. Using the optimized conditions, quantification and detection limits were obtained as 24.7 and 7.4 μg L^-1, respectively, which are compatible with the literature findings. Detection power of the FAAS system was enhanced by almost 50-fold using the optimum method based on LOD comparison. Recovery experiments were also performed with spiked wastewater matrix to examine the applicability/validity of the proposed method. The % recovery results were calculated between 85 and 91%. This established that the applicability of the developed method is high, and determination of this element in complex matrix can be performed accurately using the developed method.

Multivariate optimization of ultrasound-assisted liquid-liquid microextraction based on two solvents for cadmium preconcentration prior to determination by flame atomic absorption spectrometry

A method based on ultrasound-assisted emulsification liquid-liquid microextraction (USAEME) for cadmium determination by flame atomic absorption spectrometry (FAAS) was developed in this work. USAEME is based on the use of the mixture of 1,2-dichloroethane and trichloroethylene as an acceptor phase, 2-(2-bromo-5-pyridylazo)-5(diethylamino)phenol (Br-PADAP) as a chelating reagent, and ethanol as a dispersive solvent. The composition of the extraction and dispersive solvents, the volume of the extraction solvent, pH, and the sonication time were optimized using the multivariate strategy. The limits of detection and quantification calculated under optimum conditions were, respectively, 0.39 and 1.33 μg L-1, and the obtained enrichment factor was 21. The accuracy was tested by the analysis of certified reference materials. The method was applied to cadmium determination in bivalve mollusks, water, and urban wastewater from Pontal Bay, Bahia, Brazil. The proposed method is simple, fast, and efficient, and uses small amounts of organic solvents for the determination of cadmium.

Determination of palladium in soil samples by slotted quartz tube-flame atomic absorption spectrophotometry after vortex-assisted ligandless preconcentration with magnetic nanoparticle-based dispersive solid-phase microextraction

In this study, a rapid and effective dispersive solid-phase microextraction (d-SPME) method was developed to preconcentrate Pd from aqueous extract of soil samples by slotted quartz tube-flame atomic absorption spectrometry (SQT-FAAS). The unique properties of magnetic nanoparticles (MNPs) were used to directly isolate Pd from the sample solutions without the need for complexation. Significant parameters of the extraction method such as magnetic nanoparticle type and amount, pH and amount of buffer solution, amount of eluent, and mixing type and period were optimized together with other instrumental parameters to boost the absorbance signal of Pd. An SQT was fitted onto the burner head to boost the interaction between Pd atoms and hollow cathode lamp radiation to enhance absorbance signals. The limit of detection (LOD) and limit of quantification (LOQ) values for Pd determined (d-SPME-MNP-SQT-FAAS) were 6.4 and 21.4 ng/mL, respectively. The percentage relative standard deviation of the developed method was calculated as 6.6%. The method was applied to soil samples taken from the campus area and spiked recovery experiments were performed to evaluate the method's accuracy/applicability. Satisfactory percent recovery results (90-101%) were obtained for different spiked concentrations and this proved the accuracy/applicability of the method.