A review on the advanced leachate treatment technologies and their performance comparison: an opportunity to keep the environment safe

Management of biofilm by an innovative layer-structured membrane for membrane biofilm reactor (MBfR) to efficient methane oxidation coupled to denitrification (AME-D)

Aerobic methane oxidation coupled with denitrification (AME-D) has garnered significant attention as a promising technology for nitrogen removal from water. Effective biofilm management on the membrane surface is essential to enhance the efficiency of nitrate removal in AME-D systems. In this study, we introduce a novel and scalable layer-structured membrane (LSM) developed using a meticulously designed polyurethane sponge. The application of the LSM in advanced biofilm management for AME-D resulted in a substantial enhancement of denitrification performance. Our experimental results demonstrated remarkable improvements in nitrate-removal flux (92.8 mmol-N m-2 d-1) and methane-oxidation rate (325.6 mmol m-2 d-1) when using an LSM in a membrane biofilm reactor (L-MBfR) compared with a conventional membrane reactor (C-MBfR). The l-MBfR exhibited 12.4-, 6.8- and 3.4-fold increases in nitrate-removal rate, biomass-retention capacity, and methane-oxidation rate, respectively, relative to the control C-MBfR. Notably, the l-MBfR demonstrated a 3.5-fold higher abundance of denitrifying bacteria, including Xanthomonadaceae, Rhodocyclaceae, and Methylophilaceae. In addition, the denitrification-related enzyme activity was twice as high in the l-MBfR than in the C-MBfR. These findings underscore the LSM's ability to create anoxic/anaerobic microenvironments conducive to biofilm formation and denitrification. Furthermore, the LSM exhibited a unique advantage in shaping microbial community structures and facilitating cross-feeding interactions between denitrifying bacteria and aerobic methanotrophs. The results of this study hold great promise for advancing the application of MBfRs in achieving efficient and reliable nitrate removal through the AME-D pathway, facilitated by effective biofilm management.

Tricks and tracks in waste management with a special focus on municipal landfill leachate: Leads and obstacles

Landfilling is the most widely used disposal method for municipal solid waste around the world. The main disadvantage of this strategy is formation of leachate, among other aspects. Landfill leachate contains highly toxic and bio-refractory substances that are detrimental to the environment and human health. Hence, the risk(s) of discharging potentially harmful landfill leachate into the environment need to be assessed and measured in order to make effective choices about landfill leachate management and treatment. In view of this, the present review aims to investigate (a) how landfill leachate is perceived as an emerging concern, and (b) the stakeholders' mid- to long-term policy priorities for implementing technological and integrative solutions to reduce the harmful effects of landfill leachate. Because traditional methods alone have been reported ineffective, and in response to emerging contaminants and stringent regulations, new effective and integrated leachate treatments have been developed. This study gives a forward-thinking of the accomplishments and challenges in landfill leachate treatment during the last decade. It also provides a comprehensive compilation of the formation and characterization of landfill leachate, the geo-environmental challenges that it raises, as well as the resource recovery and industrial linkage associated with it in order to provide an insight into its sustainable management.

Strategies for enhancing the efficacy of anaerobic digestion of food industry wastewater: An insight into bioreactor types, challenges, and future scope

Food waste have become a growing concern worldwide with raising population and economic growth. Wastewater discharged from food industries contains many valuable and toxic components that have a negative impact on the ecological system. Large amounts of wastewater are discharged from the food industry, which necessitates the creation of effective technologies. Wastewater from the food industry can be seen as a rich source of energy and a primary source for generating valuable products. Waste disposal and resource recovery are sustainably valued by anaerobic digestion of wastewater from the food sector. The characteristics, composition, and nature of wastewater produced from various food sectors are elaborated upon in this review. An overview of the anaerobic digestion process for wastewater treatment in the food industry is included. Enhancement strategies for the anaerobic digestion process have been discussed in detail. In addition, various types of reactors utilized for performing anaerobic digestion is illustrated. Though anaerobic digestion process possesses advantages, the challenges and future scope are examined for improving the outcome.

Future trends and patterns in leachate biological treatment research from a bibliometric perspective

Leachate has become a great deal of concern due to its complex properties which are primarily caused by the high concentrations of organics and ammonia. Thus, proper leachate treatment is required prior to its discharge. Leachate can be treated in various ways, and biological treatment is one of the approaches. This treatment has been shown to be both effective and cost-efficient while offering the possibility of resource recovery in the form of bioenergy. In this study, the underlying patterns in publications related to leachate biological treatment were uncovered through bibliometric analysis. This study also lays the groundwork for a deeper understanding of the past, current, and future trends of the leachate biological treatment. Research publications from 1974 to 2021 were retrieved from the Scopus database, and it was identified that 2013 articles were published in the span of 47 years. From the analyzed publications, China played a leading role in publishing leachate biological treatment research articles as well as having the most productive institutions and authors. Meanwhile, the USA was found to be the most active country in initiating international collaborations with 33 countries. The research hotspots were also successfully identified using keyword co-occurrences analysis. Anaerobic digestion and constructed wetland were revealed to be the research hotspots. The critical role of biological treatment in removing nitrogen from leachate was also highlighted. Besides, numerous research gaps were identified in the application of aerobic granular sludge (AGS) for leachate treatment. This can be a potential area for research in the future. Finally, future research should be encouraged to focus on the use of sustainable treatment systems in which energy recovery in the form of biogases is promoted.

Predicting the leachate generation from wet phosphogypsum stack using a water-balance-analysis based model

Leachate from wet phosphogypsum (PG) stack should be properly managed to mitigate the negative environmental impact of phosphoric industry. Accurate prediction of leachate amount is the prerequisite for efficient leachate management. In this study, a model using water balance analysis to predict leachate production from wet PG stack is established. The extruded water, which is related to PG deformation, is innovatively introduced as a variable in the model to account for the porewater's contribution. Model simulation suggested that at the early stage, fresh water need to be added to PG to facilitate the transfer or PG slurries; however, as the leachate accumulates in the tailings pond, a net discharge of PG is required starting at the fourth year for the studied PG stack. Model simulation also indicated that the leachate generation increased gradually over time and that the leachate generation in each month could deviate from the average leachate generation during the life cycle of the stack. The model output matches with measured values reasonably well, which confirmed the model's accuracy. Sensitivity analysis indicated that average precipitation and evaporation are the two most important factors that determine leachate generation rate. Monthly leachate generation rates vary significantly within the year, as the precipitation and evaporation vary in different seasons. The highest leachate generation rates were reached in rainy seasons and the lowest rates were reached in wintery months. This study could be used to optimize the PG leachate managements and to mitigate the PG related pollution to the environment.

Occurrence of organic micropollutants in municipal landfill leachate and its effective treatment by advanced oxidation processes

Landfilling is the most prominently adopted disposal technique for managing municipal solid waste across the globe. However, the main drawback associated with this method is the generation of leachate from the landfill site. Leachate, a highly concentrated liquid consisting of both organic and inorganic components arises environmental issues as it contaminates the nearby aquifers. Landfill leachate treatment by conventional methods is not preferred as the treatment methods are not much effective to remove these pollutants. Advanced oxidation processes (AOPs) based on both hydroxyl and sulfate radicals could be a promising method to remove the micropollutants completely or convert them to non-toxic compounds. The current review focuses on the occurrence of micropollutants in landfill leachate, their detection methods and removal from landfill leachate using AOPs. Pharmaceuticals and personal care products occur in the range of 10^-1 to more than 100 μg L^-1 whereas phthalates were found below the detectable limit to 384 μg L^-1, pesticides in the order of 10^-1 μg L^-1 and polyaromatic hydrocarbons occur in concentration from 10^-2 to 114.7 μg L^-1. Solid-phase extraction is the most preferred method for extracting micropollutants from leachate and liquid chromatography (LC) - mass spectrophotometer (MS) for detecting the micropollutants. Limited studies have been focused on AOPs as a potential method for the degradation of micropollutants in landfill leachate. The potential of Fenton based techniques, electrochemical AOPs and ozonation are investigated for the removal of micropollutants from leachate whereas the applicability of photocatalysis for the removal of a wide variety of micropollutants from leachate needs in-depth studies.

Effectiveness of ozonation with zirconium and tin tetrachloride for stabilized anaerobic landfill leachate treatment

Landfill leachate can threaten the environment and human life. Therefore, this study aims to investigate the efficiency of ozone (O₃ ), O₃ with zirconium tetrachloride (O₃ /ZrCl₄ ), and O₃ with tin tetrachloride (O₃ /SnCl₄ ) in remediating the stabilized anaerobic landfill leachate (SAL) from Alor Pongsu, Perak. Hydroxyl radical (OH•) is an important oxidizing agent in the ozonation process. Its presence was tested using tert-butyl alcohol. Results showed that using ZrCl₄ and SnCl₄ in ozonation boosted the generation of hydroxyl radical, thereby enhancing the oxidation process and pollutant removal inside the sample. The O₃ /ZrCl₄ mix at chemical oxygen demand (COD) to ZrCl₄ ratio of 1:1.5, pH 8-9, and 90-min reaction time resulted in the highest reduction rates of COD and color at 91.9% and 99.6%, respectively. All results demonstrated that the optimum performance occurred at alkaline conditions (pH > 8), proving that OH radicals primarily oxidized the pollutants through an indirect reaction pathway. The biodegradability (biochemical oxygen demand/COD) ratio was also considerably improved from 0.02 (raw) to 0.37 using O₃ /ZrCl₄ , compared with using O₃ alone and using O₃ /SnCl₄ , which only recorded 0.23 and 0.28, respectively, after the treatment. The study demonstrated that O₃ /ZrCl₄ was the most efficient combination. PRACTITIONER POINTS: The O₃ /ZrCl₄ recorded the highest COD and color removals. The O₃ /ZrCl₄ combination also recorded higher OH• concentrations. The biodegradability of leachate (BOD₅ /COD ratio) improved from 0.02 to 0.37.

Physical-chemical pre-treatment of sanitary landfill raw leachate by direct ascending filtration

Several environmental problems in Brazil are caused by the accelerated urban and industrial growth and by the multiplicity of urban waste generated. Waste disposal in landfills is still common practice in Brazil. This work was conducted in sand filters and activated carbon column, proposing an alternative for the physical-chemical treatment of leachate as a pre-treatment to preserve the biological process. The results showed reductions of up to 74% for COD, 47% for BOD5, 93% for color, 90% for ammonia and an increase from 0.3 to 0.9 in the BOD5/COD ratio. Although the results obtained do not fall within the limits of the legislation, the results for ammonia concentration was reduced by 33.25% and 85.37% after filtration and activated carbon column treatment respectively. The use of activated carbon columns resulted in an excellent performance in the reduction of heavy metals in the leachate. The performance demonstrated a removal of 60-96%. Limitations were found in the length of the filtration races, as a limiting factor in the process. The results show the potential of using direct upward filtration with sand and activated carbon filters for the treatment of landfill leachate.

Microalgae Chlorella vulgaris and Scenedesmus dimorphus co-cultivation with landfill leachate for pollutant removal and lipid production

In this study, landfill leachate was pre-treated with NaClO, and then diluted to 5%, 10% and 15% for microalgae growth of Chlorella vulgaris and Scenedesmus dimorphus in the mono- and co-culture modes to investigate the nutrient removal and growth characteristics of microalgae. The results revealed that landfill leachate with the 10% dilution rate was conducive for microalgae growth and exhibited robust biomass growth and the highest nutrient removal efficiency. The co-culture biomass in 10% landfill leachate achieved 0.266 g/L within 10 days and demonstrated the improved nutrient utilisation efficiency of microalgae. In addition, the chemical oxygen demand, ammonia nitrogen, total nitrate and total phosphorus removal efficiencies accordingly reached 81.0%, 80.1%, 72.1% and 86.0% in 10% landfill leachate. Meanwhile, both the enzyme activity and fluorescence parameters proved that the cell activity of co-culture was higher than that of mono-culture.

Advances in Biological Nitrogen Removal of Landfill Leachate

With the development of economy and the improvement of people’s living standard, landfill leachate has been increasing year by year with the increase in municipal solid waste output. How to treat landfill leachate with high efficiency and low consumption has become a major problem, because of its high ammonia nitrogen and organic matter content, low carbon to nitrogen ratio and difficult degradation. In order to provide reference for future engineering application of landfill leachate treatment, this paper mainly reviews the biological treatment methods of landfill leachate, which focuses on the comparison of nitrogen removal processes combined with microorganisms, the biological nitrogen removal methods combined with ecology and the technology of direct application of microorganisms. In addition, the mechanism of biological nitrogen removal of landfill leachate and the factors affecting the microbial activity during the nitrogen removal process are also described. It is concluded that the treatment processes combined with microorganisms have higher nitrogen removal efficiency compared with the direct application of microorganisms. For example, the nitrogen removal efficiency of the combined process based on anaerobic ammonium oxidation (ANAMMOX) technology can reach more than 99%. Therefore, the treatment processes combined with microorganisms in the future engineering application of nitrogen removal in landfill leachate should be paid more attention to, and the efficiency of nitrogen removal should be improved from the aspects of microorganisms by considering factors affecting its activity.

Effect of two different intermediate landfill leachates on the ammonium oxidation rate of non-adapted and adapted nitrifying biomass

A widely employed approach to minimize the detrimental effect of landfill leachates (LL) on nitrifying biomass is to adapt it to these contaminated effluents prior to use. In the study reported here the impact of different intermediate landfill leachates (intermediate 1 (ILL1) and intermediate 2 (ILL2)) and synthetic medium (SM) on the nitritation rates of non-adapted and adapted nitrifying biomass were evaluated and modeled. The models, based on previously reported models (Haldane, Edwards and Aiba), considered the effect of three different heavy metals (Cu, Ni and Zn) present in both landfill leachates. The proposed models fitted well with the different biomasses. The highest specific substrate oxidation rate (q_S) of the present study (41.85 ± 1.09 mg N-NH₄⁺ g TSS^-1 h^-1) was obtained by the non-adapted biomass using SM. The non-adapted biomass was characterized by ~5- and ~28-fold higher nitritation rates on using the different ammonium sources tested (SM, ILL1 and ILL2) when compared to the other biomasses adapted to ILL1 (~9 mg N-NH₄⁺ g TSS^-1 h^-1) and ILL2 (~1.3 mg N-NH₄⁺ g TSS^-1 h^-1), respectively. The calculated inhibition constants indicate that the inhibitory effect of the heavy metals followed the order Ni>Zn>Cu. The results reported here bring into question the commonly accepted idea that an adaptation period of the biomass is required to treat landfill leachate.

Simultaneous removal of ammonium from landfill leachate and hydrogen sulfide from biogas using a novel two-stage oxic-anoxic system

Anoxic biodesulfurization has been achieved in several bioreactor systems that have shown robustness and high elimination capacities (ECs). However, the high operating costs of this technology, which are mainly caused by the high requirements of nitrite or nitrate, make its full-scale application difficult. In the present study, the use of biologically produced nitrate/nitrite by nitrification of two different ammonium substrates, namely synthetic medium and landfill leachate, is proposed as a novel alternative. The results demonstrate the feasibility of using both ammonium substrates as nutrient solutions. A maximum elemental sulfur production of 95 ± 1% and a maximum H₂S EC of 141.18 g S-H₂S m^-3 h^-1 (RE = 95.0%) was obtained using landfill leachate as the ammonium source. Next Generation Sequencing (NGS) analysis of the microbial community revealed that the most common genera present in the desulfurizing bioreactor were Sulfurimonas (91.8-50.9%) followed by Thauera (1.1-24.2%) and Lentimicrobium (2.0-9.7%).

Landfill leachate wastewater treatment to facilitate resource recovery by a coagulation-flocculation process via hydrogen bond

Recent trend to recover value-added products from wastewater calls for more effective pre-treatment technology. Conventional landfill leachate treatment is often complex and thus causes negative environmental impacts and financial burden. In order to facilitate downstream processing of leachate wastewater for production of energy or value-added products, it is pertinent to maximize leachate treatment performance by using simple yet effective technology that removes pollutants with minimum chemical added into the wastewater that could potentially affect downstream processing. Hence, the optimization of coagulation-flocculation leachate treatment using multivariate approach is crucial. Central composite design was applied to optimize operating parameters viz. Alum dosage, pH and mixing speed. Quadratic model indicated that the optimum COD removal of 54% is achieved with low alum dosage, pH and mixing speed of 750 mgL^-1, 8.5 and 100 rpm, respectively. Optimization result showed that natural pH of the mature landfill leachate sample is optimum for alum coagulation process. Hence, the cost of pH adjustment could be reduced for industrial application by adopting optimized parameters. The inherent mechanism of pollutant removal was elucidated by FTIR peaks at 3853 cm^-1 which indicated that hydrogen bonds play a major role in leachate removal by forming well aggregated flocs. This is concordance with SEM image that the floc was well aggregated with the porous linkages and amorphous surface structure. The optimization of leachate treatment has been achieved by minimizing the usage of alum under optimized condition.

Sustainable landfill leachate treatment: Optimize use of guar gum as natural coagulant and floc characterization

Sustainable wastewater treatment necessitates the application of natural and green material in the approach. Thus, selecting a natural coagulant in leachate treatment is a crucial step in landfill operation to prevent secondary environmental pollution due to residual inorganic coagulant in treated effluent. Current study investigated the application of guar gum in landfill leachate treatment. Central composite design in response surface methodology was used to optimize the performance of Chemical Oxygen Demand (COD) removal. Quadratic model developed indicated the optimum COD removal 22.57% at guar gum dosage of 44.39 mg/L, pH 8.56 (natural pH of leachate) and mixing speed 79.27 rpm. Scanning electron microscopy showed that floc was compact and energy-dispersive-x-ray analysis showed that guar gum was capable to adsorb multiple ions from the leachate. Structural characterization using Fourier Transform Infrared analysis demonstrated that hydrogen bonding between guar and pollutant particles was involved in coagulation and flocculation process. Therefore, guar gum coagulant present potential to be an alternative in leachate treatment where pH requirement is not required during treatment. Simultaneously, adsorption by guar gum offers added pollutant removal advantage.

The roles of phosphorus species formed in activated biochar from rice husk in the treatment of landfill leachate

Untreated landfill leachate is a threat to the environment. Here, the phosphoric acid activated biochars prepared from rice husk were successfully used for leachate treatment to achieve a high removal of color (100%), pollutants (>90%), chemical oxygen demand (∼80%) and NH₄⁺-N (100%). The leachate treatment process on phosphoric acid activated biochar could be well described by the pseudo-second order and Langmuir isotherm model, and it was controlled by external mass transfer followed by intra-particle diffusion. The phosphorus species formed in activated biochar could adjust and control the textural properties and structures of biochar, while the phosphorus species of activated biochar could attract humic acid-like organics in the leachate via hydrogen bond and π-π interactions, which were found to significantly enhance the treatment of leachate. The findings provided important insights for efficient treatment of wastewater using agricultural waste residues on an industrial scale.