Nanowires of iron oxides embedded in SiO2 templates

Hybridization of commercial polymeric microparticles and magnetic nanoparticles for the dispersive micro-solid phase extraction of nitroaromatic hydrocarbons from water

In this article, the combination of commercial polymeric microparticles (OASIS MCX) and cobalt ferrite nanoparticles is evaluated in dispersive micro-solid phase extraction (D-μSPE) for the determination of six nitroaromatic hydrocarbons in water. The high affinity of the polymeric material toward the target analytes as well as the magnetic behavior of cobalt ferrite nanoparticles are combined in a synergic way to developed an efficient and simple D-μSPE approach. The sorptive performance of the hybrid material is compared with that most usual sorbents and the effect of its synthesis steps on the extraction capability is also evaluated in depth. After the optimization of selected variables, D-μSPE method was assessed in terms of linearity, sensitivity, precision and accuracy. The new extraction method allows the determination of the target compounds with limits of detection in the range from 0.12 to 1.26 μg/L and relative standard deviations lower than 9.6%. The recovery study was performed in two different water samples obtaining percentages from 71 to 103%, which demonstrated the applicability of the hybrid sorbent for the selected analytical problem.

Controlled synthesis of vertically aligned hematite on conducting substrate for photoelectrochemical cells: nanorods versus nanotubes

This paper describes two different processes to synthesize vertically aligned hematite nanorod and nanotube arrays, respectively, on a conductive substrate by the electrochemical deposition method with the help of an anodized aluminum oxide nanotemplate. The two types of nanostructured hematite were used as the photoanode for photoelectrochemical cells. The hematite nanotubes exhibited much higher photoelectrochemical activity than the hematite nanorods, including an improved photocurrent density, more negative onset potential, better photon harvesting, and better charge carrier transfer ability. The observed behavior may offer new information to enhance the photocatalytic ability of hematite, which is considered to be one of the best photoanode materials in the research field of photoelectrochemical cells.

Controlled growth of vertically oriented hematite/Pt composite nanorod arrays: use for photoelectrochemical water splitting

Highly ordered and vertically grown Pt-doped α-Fe(2)O(3) nanorod arrays on a gold substrate were successfully prepared by the electrochemical co-deposition method using an anodized aluminum oxide template. The effect of the Pt doping in α-Fe(2)O(3) nanorod arrays on their water splitting ability was investigated for the first time. The elemental maps obtained by energy dispersive spectroscopy showed that the Pt was uniformly dispersed in the α-Fe(2)O(3) nanorod arrays. The photoelectrochemical properties of the α-Fe(2)O(3)/Pt composite nanorod arrays as a function of the Pt content were studied by measuring their photocurrent-potential behavior in 1 M NaOH electrolyte under AM 1.5 100 mW cm(-2) illumination. The Pt-doped α-Fe(2)O(3) nanorod arrays show an improvement in solar-to-hydrogen conversion efficiency (∼5%) for photoelectrochemical water splitting compared to undoped samples. To the best of our knowledge, it is the highest value yet obtained from α-Fe(2)O(3).

Synthesis of Fe(2)O(3)/TiO(2) nanorod-nanotube arrays by filling TiO(2) nanotubes with Fe

Synthesis of hematite (α-Fe(2)O(3)) nanostructures on a titania (TiO(2)) nanotubular template is carried out using a pulsed electrodeposition technique. The TiO(2) nanotubes are prepared by the sonoelectrochemical anodization method and are filled with iron (Fe) by pulsed electrodeposition. The Fe/TiO(2) composite is then annealed in an O(2) atmosphere to convert it to Fe(2)O(3)/TiO(2) nanorod-nanotube arrays. The length of the Fe(2)O(3) inside the TiO(2) nanotubes can be tuned from 50 to 550 nm by changing the deposition time. The composite material is characterized by scanning electron microscopy, transmission electron microscopy and diffuse reflectance ultraviolet-visible studies to confirm the formation of one-dimensional Fe(2)O(3)/TiO(2) nanorod-nanotube arrays. The present approach can be used for designing variable one-dimensional metal oxide heterostructures.

Mesoporous silica-magnetite nanocomposite synthesized by using a neutral surfactant

Magnetite nanoparticles coated by mesoporous silica were synthesized by an alternative chemical route using a neutral surfactant and without the application of any functionalization method. The magnetite (Fe(3)O(4)) nanoparticles were prepared by precipitation from aqueous media, and then coated with mesoporous silica by using nonionic block copolymer surfactants as the structure-directing agents. The mesoporous SiO(2)-coated Fe(3)O(4) samples were characterized by x-ray diffraction, Fourier-transform infrared spectroscopy, N(2) adsorption-desorption isotherms, transmission electron microscopy, (57)Fe Mössbauer spectroscopy, and vibrating sample magnetometry. Our results revealed that the magnetite nanoparticles are completely coated by well-ordered mesoporous silica with free pores and stable (∼8 nm thick) pore walls, and that the structural and magnetic properties of the Fe(3)O(4) nanoparticles are preserved in the applied synthesis route.