Electrochemical performance of graphene oxide modified graphite felt as a positive electrode in all-iron redox flow batteries

An anode and cathode cooperative oxidation system constructed with Ee-GF as anode and CuFe2O4/Cu2O/Cu@EGF as cathode for the efficient removal of sulfamethoxazole

This study aimed to further improve the degradation efficiency of pollutants by electrochemical oxidation system and reduce the consumption of electric energy. A simple method of electrochemical exfoliation was used to modify graphite felt (GF) to prepare an anode material (Ee-GF) with high degradation performance. An anode and cathode cooperative oxidation system was constructed with Ee-GF as the anode and CuFe₂O₄/Cu₂O/Cu@EGF as the cathode to efficiently degrade sulfamethoxazole (SMX). Complete degradation of SMX was achieved within 30 min. Compared with anodic oxidation system alone, the degradation time of SMX was reduced by half and the energy consumption was reduced by 66.8 %. The system displayed excellent performance for the degradation of different concentrations (10-50 mg L^-1) of SMX, different pollutants, and under different water quality conditions. In addition, the system still maintained 91.7 % removal rate of SMX after ten consecutive runs. At least 12 degradation products and seven possible degradation routes of SMX were generated in the degradation process by the combined system. The eco-toxicity of degradation products of SMX was reduced after the proposed treatment. This study provided a theoretical basis for the safe, efficient, and low energy consumption removal of antibiotic wastewater.

Anode modification of sediment microbial fuel cells (SMFC) towards bioremediating mariculture wastewater

Remediation of mariculture wastewater is of great practical importance. In this study, sediment microbial fuel cells (SMFCs) were adopted and carbon felt anodes were modified to enhance COD and ammonia removal in mariculture system. The results showed that the SMFC anode with 5 % (w/w) graphene oxide (GO) coating performed best in pollutants removal and electricity generation. The maximum power density approached 132 mW/m², nearly 4.5 times higher than the unmodified anode. The removal efficiency of COD and ammonia reached 82.1 % and 95.8 % respectively, both improved compared with the control and chemical modification. The modified anode effectively enriched the electrogenic Sulfurovum and Lactobacillus and thus led to a significant improvement in the electrochemical performance of SMFC. This study demonstrates the successful application of SMFCs with GO modified anodes in the in-situ removing pollutants and SMFCs present obvious remediation potential on the contaminated mariculture inhabitant.

Preparation and Properties of Indium Ion Modified Graphite Felt Composite Electrode

Iron-chromium redox flow batteries (ICRFBs) have the advantages of high safety, long cycle life, flexible design, and low maintenance costs. Polyacrylonitrile-based graphite felt composite material has good temperature resistance, corrosion resistance, large surface area and excellent electrical conductivity, and is often used as the electrode material of ICRFB, but its chemical activity is poor. In order to improve the activity of the graphite felt electrode, In3+ was used for modification in this paper, and the modified graphite felt was used as the electrode material for iron-chromium batteries. The structure and surface morphology of the modified graphite felt were analyzed by the specific surface area analyzer and scanning electron microscope; the electrochemical impedance spectroscopy and cyclic voltammetry experiments were carried out on the electrochemical workstation to study the electro catalytic activity of In3+ modified graphite felt and its performance in ICRFBS. The results show that the graphite felt electrode modified with a concentration of 0.2 M In3+ was activated at 400°C for 2 h, and its surface showed a lot of grooves, and the specific surface area reached 3.889 m2/g, while the specific surface area of the untreated graphite felt was only 0.995 m2/g significantly improved. Electrochemical tests show that the electrochemical properties of graphite felt electrodes are improved after In3+ modification. Therefore, the In3+ modified graphite felt electrode can improve the performance of ICRFB battery, and also make it possible to realize the engineering application of ICRFB battery.

Carbon spheres decorated-graphene oxide framework as an excellent active material for redox flow battery and supercapacitors

Composite of dextrose-derived oxygen-rich carbon spheres and graphene oxide, synthesised using a cost-effective and easy hydrothermal process, was used as an active material in two of the trending and promising energy storage devices. The surface morphology and properties of the composite were studied using scanning electron microscope, X-ray diffractometer, energy dispersive X-ray analysis, elemental mapping and Raman spectra. To analyse the electrochemical behaviour of the material, several electrochemical techniques such as cyclic voltammetry (CV), chronopotentiometry, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarisation study were used. The reversibility of Fe²⁺/Fe³⁺ redox species and resistance offered by electrolyte towards the modified electrode were studied using CV, EIS and Tafel studies. Further evaluation of efficacy of the active material towards the iron redox flow battery (IRFB) of 132 cm² area was analysed by performing charge discharge studies at varied current densities. Substantial increase in the electrochemical performance of the IRFB with a coulombic efficiency (CE) 93% along with the good life cycle stability up to 25 cycles was observed. The composite was also used as a superior electrode material for supercapacitor application resulting in significant enhancement in the electrochemical performance with specific capacitance of 610 F g^-1 and CE of 83% with 93% retention up to 1600 cycles.