Tautomerism in large databases

Tautomeric Conflicts in Forty Small-Molecule Databases

We have analyzed 40 different databases ranging in size from a few thousand to nearly 100 million molecules, comprising a total of over 210 million structures, for their tautomeric conflicts. A tautomeric conflict is defined as an occurrence of two or more structures within a data set identified by the tautomeric rules applied as being tautomers of each other. We tested a total of 119 detailed tautomeric transform rules expressed as SMIRKS, out of which 79 yielded at least one conflict. These transformations include three types of tautomerism: prototropic, ring-chain, and valence tautomerism. The databases analyzed spanned a wide variety of types including large aggregating databases, drug collections, and structure collections based on experimental data. All databases analyzed showed intra-database tautomeric conflicts. The conflict rates as percentage of the database were typically in the few tenths of a percent range, which for the largest databases amounts to >100,000 cases per database.

Software Infrastructure for Next-Generation QM/MM-ΔMLP Force Fields

We present software infrastructure for the design and testing of new quantum mechanical/molecular mechanical and machine-learning potential (QM/MM-ΔMLP) force fields for a wide range of applications. The software integrates Amber's molecular dynamics simulation capabilities with fast, approximate quantum models in the xtb package and machine-learning potential corrections in DeePMD-kit. The xtb package implements the recently developed density-functional tight-binding QM models with multipolar electrostatics and density-dependent dispersion (GFN2-xTB), and the interface with Amber enables their use in periodic boundary QM/MM simulations with linear-scaling QM/MM particle-mesh Ewald electrostatics. The accuracy of the semiempirical models is enhanced by including machine-learning correction potentials (ΔMLPs) enabled through an interface with the DeePMD-kit software. The goal of this paper is to present and validate the implementation of this software infrastructure in molecular dynamics and free energy simulations. The utility of the new infrastructure is demonstrated in proof-of-concept example applications. The software elements presented here are open source and freely available. Their interface provides a powerful enabling technology for the design of new QM/MM-ΔMLP models for studying a wide range of problems, including biomolecular reactivity and protein-ligand binding.

Free and open-source QSAR-ready workflow for automated standardization of chemical structures in support of QSAR modeling

The rapid increase of publicly available chemical structures and associated experimental data presents a valuable opportunity to build robust QSAR models for applications in different fields. However, the common concern is the quality of both the chemical structure information and associated experimental data. This is especially true when those data are collected from multiple sources as chemical substance mappings can contain many duplicate structures and molecular inconsistencies. Such issues can impact the resulting molecular descriptors and their mappings to experimental data and, subsequently, the quality of the derived models in terms of accuracy, repeatability, and reliability. Herein we describe the development of an automated workflow to standardize chemical structures according to a set of standard rules and generate two and/or three-dimensional "QSAR-ready" forms prior to the calculation of molecular descriptors. The workflow was designed in the KNIME workflow environment and consists of three high-level steps. First, a structure encoding is read, and then the resulting in-memory representation is cross-referenced with any existing identifiers for consistency. Finally, the structure is standardized using a series of operations including desalting, stripping of stereochemistry (for two-dimensional structures), standardization of tautomers and nitro groups, valence correction, neutralization when possible, and then removal of duplicates. This workflow was initially developed to support collaborative modeling QSAR projects to ensure consistency of the results from the different participants. It was then updated and generalized for other modeling applications. This included modification of the "QSAR-ready" workflow to generate "MS-ready structures" to support the generation of substance mappings and searches for software applications related to non-targeted analysis mass spectrometry. Both QSAR and MS-ready workflows are freely available in KNIME, via standalone versions on GitHub, and as docker container resources for the scientific community. Scientific contribution: This work pioneers an automated workflow in KNIME, systematically standardizing chemical structures to ensure their readiness for QSAR modeling and broader scientific applications. By addressing data quality concerns through desalting, stereochemistry stripping, and normalization, it optimizes molecular descriptors' accuracy and reliability. The freely available resources in KNIME, GitHub, and docker containers democratize access, benefiting collaborative research and advancing diverse modeling endeavors in chemistry and mass spectrometry.

MolTaut: A Tool for the Rapid Generation of Favorable Tautomer in Aqueous Solution

Fast and proper treatment of the tautomeric states for drug-like molecules is critical in computer-aided drug discovery since the major tautomer of a molecule determines its pharmacophore features and physical properties. We present MolTaut, a tool for the rapid generation of favorable states of drug-like molecules in water. MolTaut works by enumerating possible tautomeric states with tautomeric transformation rules, ranking tautomers with their relative internal energies and solvation energies calculated by AI-based models, and generating preferred ionization states according to predicted microscopic pK_a. Our test shows that the ranking ability of the AI-based tautomer scoring approach is comparable to the DFT method (wB97X/6-31G*//M062X/6-31G*/SMD) from which the AI models try to learn. We find that the substitution effect on tautomeric equilibrium is well predicted by MolTaut, which is helpful in computer-aided ligand design. The source code of MolTaut is freely available to researchers and can be accessed at https://github.com/xundrug/moltaut. To facilitate the usage of MolTaut by medicinal chemists, we made a free web server, which is available at http://moltaut.xundrug.cn. MolTaut is a handy tool for investigating the tautomerization issue in drug discovery.

John PC. Multi-objective goal-directed optimization of de novo stable organic radicals for aqueous redox flow batteries

Advances in the field of goal-directed molecular optimization offer the promise of finding feasible candidates for even the most challenging molecular design applications. One example of a fundamental design challenge is the search for novel stable radical scaffolds for an aqueous redox flow battery that simultaneously satisfy redox requirements at the anode and cathode, as relatively few stable organic radicals are known to exist. To meet this challenge, we develop a new open-source molecular optimization framework based on AlphaZero coupled with a fast, machine-learning-derived surrogate objective trained with nearly 100,000 quantum chemistry simulations. The objective function comprises two graph neural networks: one that predicts adiabatic oxidation and reduction potentials and a second that predicts electron density and local three-dimensional environment, previously shown to be correlated with radical persistence and stability. With no hard-coded knowledge of organic chemistry, the reinforcement learning agent finds molecule candidates that satisfy a precise combination of redox, stability and synthesizability requirements defined at the quantum chemistry level, many of which have reasonable predicted retrosynthetic pathways. The optimized molecules show that alternative stable radical scaffolds may offer a unique profile of stability and redox potentials to enable low-cost symmetric aqueous redox flow batteries.

iRaPCA and SOMoC: Development and Validation of Web Applications for New Approaches for the Clustering of Small Molecules

The clustering of small molecules implies the organization of a group of chemical structures into smaller subgroups with similar features. Clustering has important applications to sample chemical datasets or libraries in a representative manner (e.g., to choose, from a virtual screening hit list, a chemically diverse subset of compounds to be submitted to experimental confirmation, or to split datasets into representative training and validation sets when implementing machine learning models). Most strategies for clustering molecules are based on molecular fingerprints and hierarchical clustering algorithms. Here, two open-source in-house methodologies for clustering of small molecules are presented: iterative Random subspace Principal Component Analysis clustering (iRaPCA), an iterative approach based on feature bagging, dimensionality reduction, and K-means optimization; and Silhouette Optimized Molecular Clustering (SOMoC), which combines molecular fingerprints with the Uniform Manifold Approximation and Projection (UMAP) and Gaussian Mixture Model algorithm (GMM). In a benchmarking exercise, the performance of both clustering methods has been examined across 29 datasets containing between 100 and 5000 small molecules, comparing these results with those given by two other well-known clustering methods, Ward and Butina. iRaPCA and SOMoC consistently showed the best performance across these 29 datasets, both in terms of within-cluster and between-cluster distances. Both iRaPCA and SOMoC have been implemented as free Web Apps and standalone applications, to allow their use to a wide audience within the scientific community.

canSAR chemistry registration and standardization pipeline

Background

Integration of medicinal chemistry data from numerous public resources is an increasingly important part of academic drug discovery and translational research because it can bring a wealth of important knowledge related to compounds in one place. However, different data sources can report the same or related compounds in various forms (e.g., tautomers, racemates, etc.), thus highlighting the need of organising related compounds in hierarchies that alert the user on important bioactivity data that may be relevant. To generate these compound hierarchies, we have developed and implemented canSARchem, a new compound registration and standardization pipeline as part of the canSAR public knowledgebase. canSARchem builds on previously developed ChEMBL and PubChem pipelines and is developed using KNIME. We describe the pipeline which we make publicly available, and we provide examples on the strengths and limitations of the use of hierarchies for bioactivity data exploration. Finally, we identify canonicalization enrichment in FDA-approved drugs, illustrating the benefits of our approach.

Results

We created a chemical registration and standardization pipeline in KNIME and made it freely available to the research community. The pipeline consists of five steps to register the compounds and create the compounds’ hierarchy: 1. Structure checker, 2. Standardization, 3. Generation of canonical tautomers and representative structures, 4. Salt strip, and 5. Generation of abstract structure to generate the compound hierarchy. Unlike ChEMBL’s RDKit pipeline, we carry out compound canonicalization ahead of getting the parent structure, similar to PubChem’s OpenEye pipeline. canSARchem has a lower rejection rate compared to both PubChem and ChEMBL. We use our pipeline to assess the impact of grouping the compounds in hierarchies for bioactivity data exploration. We find that FDA-approved drugs show statistically significant sensitivity to canonicalization compared to the majority of bioactive compounds which demonstrates the importance of this step.

Conclusions

We use canSARchem to standardize all the compounds uploaded in canSAR (> 3 million) enabling efficient data integration and the rapid identification of alternative compound forms with useful bioactivity data. Comparison with PubChem and ChEMBL pipelines evidenced comparable performances in compound standardization, but only PubChem and canSAR canonicalize tautomers and canSAR has a slightly lower rejection rate. Our results highlight the importance of compound hierarchies for bioactivity data exploration. We make canSARchem available under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0) at https://gitlab.icr.ac.uk/cansar-public/compound-registration-pipeline.

Tautomerization and Isomerization in Quantitative NMR: A Case Study with 4-Deoxynivalenol (DON)

The regulated mycotoxin 4-deoxynivalenol (DON) has a heterocyclic structure that is readily amenable to tautomerization and conformational isomerization in solution. An analysis of DON in solution by NMR revealed the presence of hemiacetal tautomer(s) and putative conformational isomers, which maintain the intact enone functional group. The extent and type of tautomerization/isomerization vary according to the NMR solvent used and produce different signal patterns in the NMR spectra. Thus, the same proton produces multiple signals depending on which isomer/tautomer it belongs to. To maintain the accuracy of quantitative NMR (qNMR) measurements, it was essential to conclusively identify all signals belonging to the same proton to avoid underestimating its integral value. A strategy to overcome the complications of DON tautomerization and isomerization in solution during qNMR is reported. Of all proton atoms on the DON carbo-skeleton, H-10 produced clearly defined signals centered at 6.6 ppm for suspected conformational isomers and at 5.5 ppm for hemiacetal tautomers. To determine the purity of DON by quantitative proton NMR, the collective integrals of all isomeric and tautomeric signals belonging to H-10 provided the most accurate value. The purity of DON obtained with this protocol is highly accurate and suitable for the value assignment of certified reference materials (CRMs).

Machine Learning Applied to the Modeling of Pharmacological and ADMET Endpoints

The well-known concept of quantitative structure-activity relationships (QSAR) has been gaining significant interest in the recent years. Data, descriptors, and algorithms are the main pillars to build useful models that support more efficient drug discovery processes with in silico methods. Significant advances in all three areas are the reason for the regained interest in these models. In this book chapter we review various machine learning (ML) approaches that make use of measured in vitro/in vivo data of many compounds. We put these in context with other digital drug discovery methods and present some application examples.

Automated Exploration of Prebiotic Chemical Reaction Space: Progress and Perspectives

Prebiotic chemistry often involves the study of complex systems of chemical reactions that form large networks with a large number of diverse species. Such complex systems may have given rise to emergent phenomena that ultimately led to the origin of life on Earth. The environmental conditions and processes involved in this emergence may not be fully recapitulable, making it difficult for experimentalists to study prebiotic systems in laboratory simulations. Computational chemistry offers efficient ways to study such chemical systems and identify the ones most likely to display complex properties associated with life. Here, we review tools and techniques for modelling prebiotic chemical reaction networks and outline possible ways to identify self-replicating features that are central to many origin-of-life models.

Fitting quantum machine learning potentials to experimental free energy data: predicting tautomer ratios in solution

The computation of tautomer ratios of druglike molecules is enormously important in computer-aided drug discovery, as over a quarter of all approved drugs can populate multiple tautomeric species in solution. Unfortunately, accurate calculations of aqueous tautomer ratios—the degree to which these species must be penalized in order to correctly account for tautomers in modeling binding for computer-aided drug discovery—is surprisingly difficult. While quantum chemical approaches to computing aqueous tautomer ratios using continuum solvent models and rigid-rotor harmonic-oscillator thermochemistry are currently state of the art, these methods are still surprisingly inaccurate despite their enormous computational expense. Here, we show that a major source of this inaccuracy lies in the breakdown of the standard approach to accounting for quantum chemical thermochemistry using rigid rotor harmonic oscillator (RRHO) approximations, which are frustrated by the complex conformational landscape introduced by the migration of double bonds, creation of stereocenters, and introduction of multiple conformations separated by low energetic barriers induced by migration of a single proton. Using quantum machine learning (QML) methods that allow us to compute potential energies with quantum chemical accuracy at a fraction of the cost, we show how rigorous relative alchemical free energy calculations can be used to compute tautomer ratios in vacuum free from the limitations introduced by RRHO approximations. Furthermore, since the parameters of QML methods are tunable, we show how we can train these models to correct limitations in the underlying learned quantum chemical potential energy surface using free energies, enabling these methods to learn to generalize tautomer free energies across a broader range of predictions.

We show how alchemical free energies can be calculated with QML potentials to identify deficiencies in RRHO approximations for computing tautomeric free energies, and how these potentials can be learned from experiment to improve prediction accuracy.

Impact of the Characteristics of Quantum Chemical Databases on Machine Learning Prediction of Tautomerization Energies

An essential aspect for adequate predictions of chemical properties by machine learning models is the database used for training them. However, studies that analyze how the content and structure of the databases used for training impact the prediction quality are scarce. In this work, we analyze and quantify the relationships learned by a machine learning model (Neural Network) trained on five different reference databases (QM9, PC9, ANI-1E, ANI-1, and ANI-1x) to predict tautomerization energies from molecules in Tautobase. For this, characteristics such as the number of heavy atoms in a molecule, number of atoms of a given element, bond composition, or initial geometry on the quality of the predictions are considered. The results indicate that training on a chemically diverse database is crucial for obtaining good results and also that conformational sampling can partly compensate for limited coverage of chemical diversity. The overall best-performing reference database (ANI-1x) performs on average by 1 kcal/mol better than PC9, which, however, contains about 2 orders of magnitude fewer reference structures. On the other hand, PC9 is chemically more diverse by a factor of ∼5 as quantified by the number of atom-in-molecule-based fragments (amons) it contains compared with the ANI family of databases. A quantitative measure for deficiencies is the Kullback-Leibler divergence between reference and target distributions. It is explicitly demonstrated that when certain types of bonds need to be covered in the target database (Tautobase) but are undersampled in the reference databases, the resulting predictions are poor. Examples of this include the poor performance of all databases analyzed to predict C(sp²)-C(sp²) double bonds close to heteroatoms and azoles containing N-N and N-O bonds. Analysis of the results with a Tree MAP algorithm provides deeper understanding of specific deficiencies in predicting tautomerization energies by the reference datasets due to inadequate coverage of chemical space. Capitalizing on this information can be used to either improve existing databases or generate new databases of sufficient diversity for a range of machine learning (ML) applications in chemistry.

VSPrep: A KNIME Workflow for the Preparation of Molecular Databases for Virtual Screening

Drug discovery is a challenging and expensive field. Hence, novel in silico tools have been developed in early discovery stage to identify and prioritize novel molecules with suitable physicochemical properties. In many in silico drug design projects, molecular databases are screened by virtual screening tools to search for potential bioactive molecules. The preparation of the molecules is therefore a key step in the success of well-established techniques such as docking, similarity or pharmacophore searching. We review here the lists of several toolkits used in different steps during the cleaning of molecular databases, integrated within a KNIME workflow. During the first step of the automatic workflow, salts are removed, and mixtures are split to get one compound per entry. Then compounds with unwanted features are filtered. Duplicated entries are then deleted while considering stereochemistry. As a compromise between exhaustiveness and computational time, most distributed tautomers at physiological pH are computed. Additionally, various flags are applied to molecules by using either classical molecular descriptors, similarity search to known libraries or substructure search rules. Moreover, stereoisomers are enumerated depending on the unassigned chiral centers. Then, three-dimensional coordinates, and optionally conformers, are generated. This workflow has been already applied to several drug design projects and can be used for molecular database preparation upon request.

An open source chemical structure curation pipeline using RDKit

BACKGROUND

The ChEMBL database is one of a number of public databases that contain bioactivity data on small molecule compounds curated from diverse sources. Incoming compounds are typically not standardised according to consistent rules. In order to maintain the quality of the final database and to easily compare and integrate data on the same compound from different sources it is necessary for the chemical structures in the database to be appropriately standardised.

RESULTS

A chemical curation pipeline has been developed using the open source toolkit RDKit. It comprises three components: a Checker to test the validity of chemical structures and flag any serious errors; a Standardizer which formats compounds according to defined rules and conventions and a GetParent component that removes any salts and solvents from the compound to create its parent. This pipeline has been applied to the latest version of the ChEMBL database as well as uncurated datasets from other sources to test the robustness of the process and to identify common issues in database molecular structures.

CONCLUSION

All the components of the structure pipeline have been made freely available for other researchers to use and adapt for their own use. The code is available in a GitHub repository and it can also be accessed via the ChEMBL Beaker webservices. It has been used successfully to standardise the nearly 2 million compounds in the ChEMBL database and the compound validity checker has been used to identify compounds with the most serious issues so that they can be prioritised for manual curation.

Tautomer Standardization in Chemical Databases: Deriving Business Rules from Quantum Chemistry

Databases of small, potentially bioactive molecules are ubiquitous across the industry and academia. Designed such that each unique compound should appear only once, the multiplicity of ways in which many compounds can be represented means that these databases require methods for standardizing the representation of chemistry. This is commonly achieved through the use of "Chemistry Business Rules", sets of predefined rules that describe the "house style" of the database in question. At Syngenta, the historical approach to the design of chemistry business rules has been to focus on consistency of representation, with chemical relevance given secondary consideration. In this work, we overturn that convention. Through the use of quantum chemistry calculations, we define a set of chemistry business rules for tautomer standardization that reproduces gas-phase energetic preferences. We go on to show that, compared to our historic approach, this method yields tautomers that are in better agreement with those observed experimentally in condensed phases and that are better suited for use in predictive models.

Toward a Comprehensive Treatment of Tautomerism in Chemoinformatics Including in InChI V2

We have collected 86 different transforms of tautomeric interconversions. Out of those, 54 are for prototropic (non-ring-chain) tautomerism, 21 for ring-chain tautomerism, and 11 for valence tautomerism. The majority of these rules have been extracted from experimental literature. Twenty rules, covering the most well-known types of tautomerism such as keto-enol tautomerism, were taken from the default handling of tautomerism by the chemoinformatics toolkit CACTVS. The rules were analyzed against nine differerent databases totaling over 400 million (non-unique) structures as to their occurrence rates, mutual overlap in coverage, and recapitulation of the rules' enumerated tautomer sets by InChI V.1.05, both in InChI's Standard and a Nonstandard version with the increased tautomer-handling options 15T and KET turned on. These results and the background of this study are discussed in the context of the IUPAC InChI Project tasked with the redesign of handling of tautomerism for an InChI version 2. Applying the rules presented in this paper would approximately triple the number of compounds in typical small-molecule databases that would be affected by tautomeric interconversion by InChI V2. A web tool has been created to test these rules at https://cactus.nci.nih.gov/tautomerizer.

Automated exploration of the low-energy chemical space with fast quantum chemical methods

We propose and discuss an efficient scheme for the in silico sampling for parts of the molecular chemical space by semiempirical tight-binding methods combined with a meta-dynamics driven search algorithm. The focus of this work is set on the generation of proper thermodynamic ensembles at a quantum chemical level for conformers, but similar procedures for protonation states, tautomerism and non-covalent complex geometries are also discussed. The conformational ensembles consisting of all significantly populated minimum energy structures normally form the basis of further, mostly DFT computational work, such as the calculation of spectra or macroscopic properties. By using basic quantum chemical methods, electronic effects or possible bond breaking/formation are accounted for and a very reasonable initial energetic ranking of the candidate structures is obtained. Due to the huge computational speedup gained by the fast low-cost quantum chemical methods, overall short computation times even for systems with hundreds of atoms (typically drug-sized molecules) are achieved. Furthermore, specialized applications, such as sampling with implicit solvation models or constrained conformational sampling for transition-states, metal-, surface-, or noncovalently bound complexes are discussed, opening many possible applications in modern computational chemistry and drug discovery. The procedures have been implemented in a freely available computer code called CREST, that makes use of the fast and reliable GFNn-xTB methods.

A review on machine learning methods for in silico toxicity prediction

In silico toxicity prediction plays an important role in the regulatory decision making and selection of leads in drug design as in vitro/vivo methods are often limited by ethics, time, budget, and other resources. Many computational methods have been employed in predicting the toxicity profile of chemicals. This review provides a detailed end-to-end overview of the application of machine learning algorithms to Structure-Activity Relationship (SAR)-based predictive toxicology. From raw data to model validation, the importance of data quality is stressed as it greatly affects the predictive power of derived models. Commonly overlooked challenges such as data imbalance, activity cliff, model evaluation, and definition of applicability domain are highlighted, and plausible solutions for alleviating these challenges are discussed.

"MS-Ready" structures for non-targeted high-resolution mass spectrometry screening studies

Chemical database searching has become a fixture in many non-targeted identification workflows based on high-resolution mass spectrometry (HRMS). However, the form of a chemical structure observed in HRMS does not always match the form stored in a database (e.g., the neutral form versus a salt; one component of a mixture rather than the mixture form used in a consumer product). Linking the form of a structure observed via HRMS to its related form(s) within a database will enable the return of all relevant variants of a structure, as well as the related metadata, in a single query. A Konstanz Information Miner (KNIME) workflow has been developed to produce structural representations observed using HRMS ("MS-Ready structures") and links them to those stored in a database. These MS-Ready structures, and associated mappings to the full chemical representations, are surfaced via the US EPA's Chemistry Dashboard ( https://comptox.epa.gov/dashboard/ ). This article describes the workflow for the generation and linking of ~ 700,000 MS-Ready structures (derived from ~ 760,000 original structures) as well as download, search and export capabilities to serve structure identification using HRMS. The importance of this form of structural representation for HRMS is demonstrated with several examples, including integration with the in silico fragmentation software application MetFrag. The structures, search, download and export functionality are all available through the CompTox Chemistry Dashboard, while the MetFrag implementation can be viewed at https://msbi.ipb-halle.de/MetFragBeta/ .

PubChem chemical structure standardization

BACKGROUND

PubChem is a chemical information repository, consisting of three primary databases: Substance, Compound, and BioAssay. When individual data contributors submit chemical substance descriptions to Substance, the unique chemical structures are extracted and stored into Compound through an automated process called structure standardization. The present study describes the PubChem standardization approaches and analyzes them for their success rates, reasons that cause structures to be rejected, and modifications applied to structures during the standardization process. Furthermore, the PubChem standardization is compared to the structure normalization of the IUPAC International Chemical Identifier (InChI) software, as manifested by conversion of the InChI back into a chemical structure.

RESULTS

The observed rejection rate for substances processed by PubChem standardization was 0.36%, which is predominantly attributed to structures with invalid atom valences that cannot be readily corrected without additional information from contributors. Of all structures that pass standardization, 44% are modified in the process, reducing the count of unique structures from 53,574,724 in substance to 45,808,881 in compound as identified by de-aromatized canonical isomeric SMILES. Even though the processing time is very low on average (only 0.4% of structures have individual standardization time above 0.1 s), total standardization time is completely dominated by edge cases: 90% of the time to standardize all structures in PubChem substance is spent on the 2.05% of structures with the highest individual standardization time. It is worth noting that 60% of the structures obtained from PubChem structure standardization are not identical to the chemical structure resulting from the InChI (primarily due to preferences for a different tautomeric form).

CONCLUSIONS

Standardization of chemical structures is complicated by the diversity of chemical information and their representations approaches. The PubChem standardization is an effective and efficient tool to account for molecular diversity and to eliminate invalid/incomplete structures. Further development will concentrate on improved tautomer consideration and an expanded stereocenter definition. Modifications are difficult to thoroughly validate, with slight changes often affecting many thousands of structures and various edge cases. The PubChem structure standardization service is accessible as a public resource ( https://pubchem.ncbi.nlm.nih.gov/standardize ), and via programmatic interfaces.

Sachem: a chemical cartridge for high-performance substructure search

BACKGROUND

Structure search is one of the valuable capabilities of small-molecule databases. Fingerprint-based screening methods are usually employed to enhance the search performance by reducing the number of calls to the verification procedure. In substructure search, fingerprints are designed to capture important structural aspects of the molecule to aid the decision about whether the molecule contains a given substructure. Currently available cartridges typically provide acceptable search performance for processing user queries, but do not scale satisfactorily with dataset size.

RESULTS

We present Sachem, a new open-source chemical cartridge that implements two substructure search methods: The first is a performance-oriented reimplementation of substructure indexing based on the OrChem fingerprint, and the second is a novel method that employs newly designed fingerprints stored in inverted indices. We assessed the performance of both methods on small, medium, and large datasets containing 1, 10, and 94 million compounds, respectively. Comparison of Sachem with other freely available cartridges revealed improvements in overall performance, scaling potential and screen-out efficiency.

CONCLUSIONS

The Sachem cartridge allows efficient substructure searches in databases of all sizes. The sublinear performance scaling of the second method and the ability to efficiently query large amounts of pre-extracted information may together open the door to new applications for substructure searches.

VSPrep: A General KNIME Workflow for the Preparation of Molecules for Virtual Screening

Over the past decades, virtual screening has proved itself to be a valuable asset to identify new bioactive compounds. The vast majority of commonly used techniques can be described in three steps: pre-processing the dataset i. e. small (ligands) and eventually larger (receptors) molecules, execute the method and finally analyse the results. Hence, the preparation of ligands is a critical step for success of commonly used virtual screening approaches such as protein-ligand docking, similarity or pharmacophore search. We present here a new workflow, VSPrep, for the pre-processing of small molecules; it is based on freely accessible tools for academics and is integrated within the KNIME platform. It can be used to perform several chemoinformatics tasks such as molecular database cleaning, tautomer and stereoisomer enumeration, focused library design and conformer generation. Additionally, graphical reports of the results are provided to the user as a convenient analysis tool.

Information Retrieval and Text Mining Technologies for Chemistry

Efficient access to chemical information contained in scientific literature, patents, technical reports, or the web is a pressing need shared by researchers and patent attorneys from different chemical disciplines. Retrieval of important chemical information in most cases starts with finding relevant documents for a particular chemical compound or family. Targeted retrieval of chemical documents is closely connected to the automatic recognition of chemical entities in the text, which commonly involves the extraction of the entire list of chemicals mentioned in a document, including any associated information. In this Review, we provide a comprehensive and in-depth description of fundamental concepts, technical implementations, and current technologies for meeting these information demands. A strong focus is placed on community challenges addressing systems performance, more particularly CHEMDNER and CHEMDNER patents tasks of BioCreative IV and V, respectively. Considering the growing interest in the construction of automatically annotated chemical knowledge bases that integrate chemical information and biological data, cheminformatics approaches for mapping the extracted chemical names into chemical structures and their subsequent annotation together with text mining applications for linking chemistry with biological information are also presented. Finally, future trends and current challenges are highlighted as a roadmap proposal for research in this emerging field.

Experimental and Chemoinformatics Study of Tautomerism in a Database of Commercially Available Screening Samples

We investigated how many cases of the same chemical sold as different products (at possibly different prices) occurred in a prototypical large aggregated database and simultaneously tested the tautomerism definitions in the chemoinformatics toolkit CACTVS. We applied the standard CACTVS tautomeric transforms plus a set of recently developed ring-chain transforms to the Aldrich Market Select (AMS) database of 6 million screening samples and building blocks. In 30 000 cases, two or more AMS products were found to be just different tautomeric forms of the same compound. We purchased and analyzed 166 such tautomer pairs and triplets by 1H and 13C NMR to determine whether the CACTVS transforms accurately predicted what is the same "stuff in the bottle". Essentially all prototropic transforms with examples in the AMS were confirmed. Some of the ring-chain transforms were found to be too "aggressive", i.e. to equate structures with one another that were different compounds.

Trust, but Verify II: A Practical Guide to Chemogenomics Data Curation

There is a growing public concern about the lack of reproducibility of experimental data published in peer-reviewed scientific literature. Herein, we review the most recent alerts regarding experimental data quality and discuss initiatives taken thus far to address this problem, especially in the area of chemical genomics. Going beyond just acknowledging the issue, we propose a chemical and biological data curation workflow that relies on existing cheminformatics approaches to flag, and when appropriate, correct possibly erroneous entries in large chemogenomics data sets. We posit that the adherence to the best practices for data curation is important for both experimental scientists who generate primary data and deposit them in chemical genomics databases and computational researchers who rely on these data for model development.

CERAPP: Collaborative Estrogen Receptor Activity Prediction Project

BACKGROUND

Humans are exposed to thousands of man-made chemicals in the environment. Some chemicals mimic natural endocrine hormones and, thus, have the potential to be endocrine disruptors. Most of these chemicals have never been tested for their ability to interact with the estrogen receptor (ER). Risk assessors need tools to prioritize chemicals for evaluation in costly in vivo tests, for instance, within the U.S. EPA Endocrine Disruptor Screening Program.

OBJECTIVES

We describe a large-scale modeling project called CERAPP (Collaborative Estrogen Receptor Activity Prediction Project) and demonstrate the efficacy of using predictive computational models trained on high-throughput screening data to evaluate thousands of chemicals for ER-related activity and prioritize them for further testing.

METHODS

CERAPP combined multiple models developed in collaboration with 17 groups in the United States and Europe to predict ER activity of a common set of 32,464 chemical structures. Quantitative structure-activity relationship models and docking approaches were employed, mostly using a common training set of 1,677 chemical structures provided by the U.S. EPA, to build a total of 40 categorical and 8 continuous models for binding, agonist, and antagonist ER activity. All predictions were evaluated on a set of 7,522 chemicals curated from the literature. To overcome the limitations of single models, a consensus was built by weighting models on scores based on their evaluated accuracies.

RESULTS

Individual model scores ranged from 0.69 to 0.85, showing high prediction reliabilities. Out of the 32,464 chemicals, the consensus model predicted 4,001 chemicals (12.3%) as high priority actives and 6,742 potential actives (20.8%) to be considered for further testing.

CONCLUSION

This project demonstrated the possibility to screen large libraries of chemicals using a consensus of different in silico approaches. This concept will be applied in future projects related to other end points.

CITATION

Mansouri K, Abdelaziz A, Rybacka A, Roncaglioni A, Tropsha A, Varnek A, Zakharov A, Worth A, Richard AM, Grulke CM, Trisciuzzi D, Fourches D, Horvath D, Benfenati E, Muratov E, Wedebye EB, Grisoni F, Mangiatordi GF, Incisivo GM, Hong H, Ng HW, Tetko IV, Balabin I, Kancherla J, Shen J, Burton J, Nicklaus M, Cassotti M, Nikolov NG, Nicolotti O, Andersson PL, Zang Q, Politi R, Beger RD, Todeschini R, Huang R, Farag S, Rosenberg SA, Slavov S, Hu X, Judson RS. 2016.

CERAPP

Collaborative Estrogen Receptor Activity Prediction Project. Environ Health Perspect 124:1023-1033; http://dx.doi.org/10.1289/ehp.1510267.

Tautomerism of Warfarin: Combined Chemoinformatics, Quantum Chemical, and NMR Investigation

Warfarin, an important anticoagulant drug, can exist in solution in 40 distinct tautomeric forms through both prototropic tautomerism and ring-chain tautomerism. We have investigated all warfarin tautomers with computational and NMR approaches. Relative energies calculated at the B3LYP/6-311G++(d,p) level of theory indicate that the 4-hydroxycoumarin cyclic hemiketal tautomer is the most stable tautomer in aqueous solution, followed by the 4-hydroxycoumarin open-chain tautomer. This is in agreement with our NMR experiments where the spectral assignments indicate that warfarin exists mainly as a mixture of cyclic hemiketal diastereomers, with an open-chain tautomer as a minor component. We present a diagram of the interconversion of warfarin created taking into account the calculated equilibrium constants (pK(T)) for all tautomeric reactions. These findings help with gaining further understanding of proton transfer and ring closure tautomerization processes. We also discuss the results in the context of chemoinformatics rules for handling tautomerism.

Charting a Path to Success in Virtual Screening

Docking is commonly applied to drug design efforts, especially high-throughput virtual screenings of small molecules, to identify new compounds that bind to a given target. Despite great advances and successful applications in recent years, a number of issues remain unsolved. Most of the challenges and problems faced when running docking experiments are independent of the specific software used, and can be ascribed to either improper input preparation or to the simplified approaches applied to achieve high-throughput speed. Being aware of approximations and limitations of such methods is essential to prevent errors, deal with misleading results, and increase the success rate of virtual screening campaigns. In this review, best practices and most common issues of docking and virtual screening will be discussed, covering the journey from the design of the virtual experiment to the hit identification.

Chemical databases: curation or integration by user-defined equivalence?

There is a wealth of valuable chemical information in publicly available databases for use by scientists undertaking drug discovery. However finite curation resource, limitations of chemical structure software and differences in individual database applications mean that exact chemical structure equivalence between databases is unlikely to ever be a reality. The ability to identify compound equivalence has been made significantly easier by the use of the International Chemical Identifier (InChI), a non-proprietary line-notation for describing a chemical structure. More importantly, advances in methods to identify compounds that are the same at various levels of similarity, such as those containing the same parent component or having the same connectivity, are now enabling related compounds to be linked between databases where the structure matches are not exact.

Principal bicorrelation analysis: Unraveling associations between three data sources

In this article, we propose a statistical explorative method for data integration. It is developed in the context of early drug development for which it enables the detection of chemical substructures and the identification of genes that mediate their association with the bioactivity (BA). The core of the method is a sparse singular value decomposition for the identification of the gene set and a permutation-based method for the control of the false discovery rate. The method is illustrated using a real dataset, and its properties are empirically evaluated by means of a simulation study. Quantitative Structure Transcriptional Activity Relationship (QSTAR, www.qstar-consortium.org ) is a new paradigm in early drug development that extends QSAR by not only considering data on the chemical structure of the compounds and on the compound-induced BA, but by simultaneously using transcriptomics data (gene expression). This approach enables, for example, the detection of chemical substructures that are associated with BA, while at the same time a gene set is correlated with both these substructures and the BA. Although causal associations cannot be formally concluded, these associations may suggest that the compounds act on the BA through a particular genomic pathway.

Azine or hydrazone? The dilemma in amidinohydrazones

Amidinohydrazone, an important class of biologically active molecules, is generally represented as a hydrazone. This moiety prefers to exist in its azine tautomeric state and hence, influences the physical, chemical and receptor binding properties.

Enumeration of ring-chain tautomers based on SMIRKS rules

A compound exhibits (prototropic) tautomerism if it can be represented by two or more structures that are related by a formal intramolecular movement of a hydrogen atom from one heavy atom position to another. When the movement of the proton is accompanied by the opening or closing of a ring it is called ring–chain tautomerism. This type of tautomerism is well observed in carbohydrates, but it also occurs in other molecules such as warfarin. In this work, we present an approach that allows for the generation of all ring–chain tautomers of a given chemical structure. Based on Baldwin’s Rules estimating the likelihood of ring closure reactions to occur, we have defined a set of transform rules covering the majority of ring–chain tautomerism cases. The rules automatically detect substructures in a given compound that can undergo a ring–chain tautomeric transformation. Each transformation is encoded in SMIRKS line notation. All work was implemented in the chemoinformatics toolkit CACTVS. We report on the application of our ring–chain tautomerism rules to a large database of commercially available screening samples in order to identify ring–chain tautomers.

UniChem: extension of InChI-based compound mapping to salt, connectivity and stereochemistry layers

UniChem is a low-maintenance, fast and freely available compound identifier mapping service, recently made available on the Internet. Until now, the criterion of molecular equivalence within UniChem has been on the basis of complete identity between Standard InChIs. However, a limitation of this approach is that stereoisomers, isotopes and salts of otherwise identical molecules are not considered as related. Here, we describe how we have exploited the layered structural representation of the Standard InChI to create new functionality within UniChem that integrates these related molecular forms. The service, called 'Connectivity Search' allows molecules to be first matched on the basis of complete identity between the connectivity layer of their corresponding Standard InChIs, and the remaining layers then compared to highlight stereochemical and isotopic differences. Parsing of Standard InChI sub-layers permits mixtures and salts to also be included in this integration process. Implementation of these enhancements required simple modifications to the schema, loader and web application, but none of which have changed the original UniChem functionality or services. The scope of queries may be varied using a variety of easily configurable options, and the output is annotated to assist the user to filter, sort and understand the difference between query and retrieved structures. A RESTful web service output may be easily processed programmatically to allow developers to present the data in whatever form they believe their users will require, or to define their own level of molecular equivalence for their resource, albeit within the constraint of identical connectivity.

On InChI and evaluating the quality of cross-reference links

BACKGROUND

There are many databases of small molecules focused on different aspects of research and its applications. Some tasks may require integration of information from various databases. However, determining which entries from different databases represent the same compound is not straightforward. Integration can be based, for example, on automatically generated cross-reference links between entries. Another approach is to use the manually curated links stored directly in databases. This study employs well-established InChI identifiers to measure the consistency and completeness of the manually curated links by comparing them with the automatically generated ones.

RESULTS

We used two different tools to generate InChI identifiers and observed some ambiguities in their outputs. In part, these ambiguities were caused by indistinctness in interpretation of the structural data used. InChI identifiers were used successfully to find duplicate entries in databases. We found that the InChI inconsistencies in the manually curated links are very high (28.85% in the worst case). Even using a weaker definition of consistency, the measured values were very high in general. The completeness of the manually curated links was also very poor (only 93.8% in the best case) compared with that of the automatically generated links.

CONCLUSIONS

We observed several problems with the InChI tools and the files used as their inputs. There are large gaps in the consistency and completeness of manually curated links if they are measured using InChI identifiers. However, inconsistency can be caused both by errors in manually curated links and the inherent limitations of the InChI method.

Phenol-quinone tautomerism in (arylazo)naphthols and the analogous Schiff bases: benchmark calculations

Tautomerization energies of a series of isomeric [(4-R-phenyl)azo]naphthols and the analogous Schiff bases (R = N(CH3)2, OCH3, H, CN, NO2) are calculated by LPNO-CEPA/1-CBS using the def2-TZVPP and def2-QZVPP basis sets for extrapolation. The performance of various density functionals (B3LYP, M06-2X, PW6B95, B2PLYP, mPW2PLYP, PWPB95) as well as MP2 and SCS-MP2 is evaluated against these results. M06-2X and SCS-MP2 yield results close to the LPNO-CEPA/1-CBS values. Solvent effects (CCl4, CHCl3, CH3CN, and CH3OH) are treated by a variety of bulk solvation models (SM8, IEFPCM, COSMO, PBF, and SMD) as well as explicit solvation (Monte Carlo free energy perturbation using the OPLSAA force field).

PDB ligand conformational energies calculated quantum-mechanically

We present here a greatly updated version of an earlier study on the conformational energies of protein-ligand complexes in the Protein Data Bank (PDB) [Nicklaus et al. Bioorg. Med. Chem. 1995, 3, 411-428], with the goal of improving on all possible aspects such as number and selection of ligand instances, energy calculations performed, and additional analyses conducted. Starting from about 357,000 ligand instances deposited in the 2008 version of the Ligand Expo database of the experimental 3D coordinates of all small-molecule instances in the PDB, we created a "high-quality" subset of ligand instances by various filtering steps including application of crystallographic quality criteria and structural unambiguousness. Submission of 640 Gaussian 03 jobs yielded a set of about 415 successfully concluded runs. We used a stepwise optimization of internal degrees of freedom at the DFT level of theory with the B3LYP/6-31G(d) basis set and a single-point energy calculation at B3LYP/6-311++G(3df,2p) after each round of (partial) optimization to separate energy changes due to bond length stretches vs bond angle changes vs torsion changes. Even for the most "conservative" choice of all the possible conformational energies-the energy difference between the conformation in which all internal degrees of freedom except torsions have been optimized and the fully optimized conformer-significant energy values were found. The range of 0 to ~25 kcal/mol was populated quite evenly and independently of the crystallographic resolution. A smaller number of "outliers" of yet higher energies were seen only at resolutions above 1.3 Å. The energies showed some correlation with molecular size and flexibility but not with crystallographic quality metrics such as the Cruickshank diffraction-component precision index (DPI) and R(free)-R, or with the ligand instance-specific metrics such as occupancy-weighted B-factor (OWAB), real-space R factor (RSR), and real-space correlation coefficient (RSCC). We repeated these calculations with the solvent model IEFPCM, which yielded energy differences that were generally somewhat lower than the corresponding vacuum results but did not produce a qualitatively different picture. Torsional sampling around the crystal conformation at the molecular mechanics level using the MMFF94s force field typically led to an increase in energy.

Making every SAR point count: the development of Chemistry Connect for the large-scale integration of structure and bioactivity data

The increase in drug research output from patent applications, together with the expansion of public data collections, such as ChEMBL and PubChem BioAssay, has made it essential for pharmaceutical companies to integrate both internal and external 'SAR estate'. The AstraZeneca response has been the development of an enterprise application, Chemistry Connect, containing 45 million unique chemical structures from 18 internal and external data sources. It includes merged compound-to-assay-to-result-to-target relationships extracted from patents, papers and internal data. Users can explore connections between these by searching using drug names or synonyms, chemical structures, patent numbers and target protein identifiers at a scale not previously available.

Software and resources for computational medicinal chemistry

Computer-aided drug design plays a vital role in drug discovery and development and has become an indispensable tool in the pharmaceutical industry. Computational medicinal chemists can take advantage of all kinds of software and resources in the computer-aided drug design field for the purposes of discovering and optimizing biologically active compounds. This article reviews software and other resources related to computer-aided drug design approaches, putting particular emphasis on structure-based drug design, ligand-based drug design, chemical databases and chemoinformatics tools.

pK(a) based protonation states and microspecies for protein-ligand docking

In this paper we present our reworked approach to generate ligand protonation states with our structure preparation tool SPORES (Structure PrOtonation and REcognition System). SPORES can be used for the preprocessing of proteins and protein-ligand complexes as e.g. taken from the Protein Data Bank as well as for the setup of 3D ligand databases. It automatically assigns atom and bond types, generates different protonation, tautomeric states as well as different stereoisomers. In the revised version, pKa calculations with the ChemAxon software MARVIN are used either to determine the likeliness of a combinatorial generated protonation state or to determine the titrable atoms used in the combinatorial approach. Additionally, the MARVIN software is used to predict microspecies distributions of ligand molecules. Docking studies were performed with our recently introduced program PLANTS (Protein-Ligand ANT System) on all protomers resulting from the three different selection methods for the well established CCDC/ASTEX clean data set demonstrating the usefulness of especially the latter approach.

Tautomerism in chemical information management systems

Tautomerism has an impact on many of the processes in chemical information management systems including novelty checking during registration into chemical structure databases; storage of structures; exact and substructure searching in chemical structure databases; and depiction of structures retrieved by a search. The approaches taken by 27 different software vendors and database producers are compared. It is hoped that this comparison will act as a discussion document that could ultimately improve databases and software for researchers in the future.