Calculating distribution coefficients based on multi-scale free energy simulations: an evaluation of MM and QM/MM explicit solvent simulations of water-cyclohexane transfer in the SAMPL5 challenge

Molecular partition coefficient from machine learning with polarization and entropy embedded atom-centered symmetry functions

Efficient prediction of the partition coefficient (log P) between polar and non-polar phases could shorten the cycle of drug and materials design. In this work, a descriptor, named 〈q - ACSFs〉_conf, is proposed to take the explicit polarization effects in the polar phase and the conformation ensemble of energetic and entropic significance in the non-polar phase into consideration. The polarization effects are involved by embedding the partial charge directly derived from force fields or quantum chemistry calculations into the atom-centered symmetry functions (ACSFs), together with the entropy effects, which are averaged according to the Boltzmann distribution of different conformations taken from the similarity matrix. The model was trained with high-dimensional neural networks (HDNNs) on a public dataset PhysProp (with 41 039 samples). Satisfactory log P prediction performance was achieved on three other datasets, namely, Martel (707 molecules), Star & Non-Star (266) and Huuskonen (1870). The present 〈q - ACSFs〉_conf model was also applicable to n-carboxylic acids with the number of carbons ranging from 2 to 14 and 54 kinds of organic solvent. It is easy to apply the present method to arbitrary sized systems and give a transferable atom-based partition coefficient.

Advancing Rare-Earth Separation by Machine Learning

Constituting the bulk of rare-earth elements, lanthanides need to be separated to fully realize their potential as critical materials in many important technologies. The discovery of new ligands for improving rare-earth separations by solvent extraction, the most practical rare-earth separation process, is still largely based on trial and error, a low-throughput and inefficient approach. A predictive model that allows high-throughput screening of ligands is needed to identify suitable ligands to achieve enhanced separation performance. Here, we show that deep neural networks, trained on the available experimental data, can be used to predict accurate distribution coefficients for solvent extraction of lanthanide ions, thereby opening the door to high-throughput screening of ligands for rare-earth separations. One innovative approach that we employed is a combined representation of ligands with both molecular physicochemical descriptors and atomic extended-connectivity fingerprints, which greatly boosts the accuracy of the trained model. More importantly, we synthesized four new ligands and found that the predicted distribution coefficients from our trained machine-learning model match well with the measured values. Therefore, our machine-learning approach paves the way for accelerating the discovery of new ligands for rare-earth separations.

Fragmentation Method for Computing Quantum Mechanics and Molecular Mechanics Gradients for Force Matching: Validation with Hydration Free Energy Predictions Using Adaptive Force Matching

A fragmentation approach referred to as a simple overlapping region method for force matching (SORForM) is presented. SORForM is designed to enable efficient computation of quantum mechanical (QM) forces for large molecules and is validated in the framework of adaptive force matching (AFM) to develop solute models in water. The SORForM method divides a molecule into overlapping QM regions with each region containing a gradient zone and a buffer zone. The buffer zone ensures that the atoms in the gradient zone have their surroundings unchanged with fragmentation. The performance of the method is validated with mefenamic acid and linalyl acetate by comparing the hydration free energies of AFM models developed with and without SORForM. The AFM hydration free energies are also compared with that of the experiments. The models developed with B3LYP-D3(BJ) and def2-TZVP are in excellent agreement with experiments. Our work shows that PBE-D3(BJ) provides less satisfactory results when compared to B3LYP-D3(BJ). The def2-TZVP basis set is found to greatly improve the agreement with experiments when compared to a double-zeta quality basis set.

Rational prioritization strategy allows the design of macrolide derivatives that overcome antibiotic resistance

Due to the development of resistance against commonly used antibiotics, new derivatives that avoid resistance mechanisms need to be developed. To address this problem, a rational prioritization strategy is outlined for macrolide antibiotics. Candidates are screened based on their solubility, membrane permeability, and binding affinity using a tiered optimization approach of free energy simulations and quantum mechanics/molecular mechanics calculations. After prioritization by computational methods, the best candidates are evaluated experimentally. The strategy creates a targeted substance library that is highly enriched in compounds with antibacterial activity. This allows for faster iterations in the development of new antibiotic derivatives.

Antibiotic resistance is a major threat to global health; this problem can be addressed by the development of new antibacterial agents to keep pace with the evolutionary adaptation of pathogens. Computational approaches are essential tools to this end since their application enables fast and early strategical decisions in the drug development process. We present a rational design approach, in which acylide antibiotics were screened based on computational predictions of solubility, membrane permeability, and binding affinity toward the ribosome. To assess our design strategy, we tested all candidates for in vitro inhibitory activity and then evaluated them in vivo with several antibiotic-resistant strains to determine minimal inhibitory concentrations. The predicted best candidate is synthetically more accessible, exhibits higher solubility and binding affinity to the ribosome, and is up to 56 times more active against resistant pathogens than telithromycin. Notably, the best compounds designed by us show activity, especially when combined with the membrane-weakening drug colistin, against Acinetobacter baumanii, Pseudomonas aeruginosa, and Escherichia coli, which are the three most critical targets from the priority list of pathogens of the World Health Organization.

Performing Molecular Dynamics Simulations and Computing Hydration Free Energies on the B3LYP-D3(BJ) Potential Energy Surface with Adaptive Force Matching: A Benchmark Study with Seven Alcohols and One Amine

The potential energy surfaces at the B3LYP-D3(BJ) level for eight solutes in dilute aqueous solutions were mapped into simple pairwise additive force field expressions using the adaptive force matching (AFM) method. The quality of the fits was validated by computing the hydration free energy (HFE), enthalpy of hydration, and diffusion constant for each solute. By force matching B3LYP-D3(BJ), the predictions from the models agree with the closest experimental HFE and enthalpy of hydration within chemical accuracy. The diffusion constants from the models are also in good agreement with experimental references. The good agreement provides confidence on the quality of B3LYP-D3(BJ) in producing potential energy surfaces for thermodynamic property calculations through AFM for the molecules studied. Accurate computational predictions could potentially provide validations to experimental measurements in cases where experimental measurements from different sources do not agree.

Criteria for Engineering Cutinases: Bioinformatics Analysis of Catalophores

Cutinases are bacterial and fungal enzymes that catalyze the hydrolysis of natural cutin, a three-dimensional inter-esterified polyester with epoxy-hydroxy fatty acids with chain lengths between 16 and 18 carbon atoms. Due to their ability to accept long chain substrates, cutinases are also effective in catalyzing in vitro both the degradation and synthesis of several synthetic polyesters and polyamides. Here, we present a bioinformatics study that intends to correlate the structural features of cutinases with their catalytic properties to provide rational basis for their effective exploitation, particularly in polymer synthesis and biodegradation. The bioinformatics study used the BioGPS method (Global Positioning System in Biological Space) that computed molecular descriptors based on Molecular Interaction Fields (MIFs) described in the GRID force field. The information was used to generate catalophores, spatial representations of the ability of each enzymatic active site to establish hydrophobic and electrostatic interactions. These tools were exploited for comparing cutinases to other serine-hydrolases enzymes, namely lipases, esterases, amidases and proteases, and for highlighting differences and similarities that might guide rational engineering strategies. Structural features of cutinases with their catalytic properties were correlated. The “catalophore” of cutinases indicate shared features with lipases and esterases.

SAMPL7 blind challenge: quantum-mechanical prediction of partition coefficients and acid dissociation constants for small drug-like molecules

The physicochemical properties of a drug molecule determine the therapeutic effectiveness of the drug. Thus, the development of fast and accurate theoretical approaches for the prediction of such properties is inevitable. The participation to the SAMPL7 challenge is based on the estimation of logP coefficients and pK_a values of small drug-like sulfonamide derivatives. Thereby, quantum mechanical calculations were carried out in order to calculate the free energy of solvation and the transfer energy of 22 drug-like compounds in different environments (water and n-octanol) by employing the SMD solvation model. For logP calculations, we studied eleven different methodologies to calculate the transfer free energies, the lowest RMSE value was obtained for the M06L/def2-TZVP//M06L/def2-SVP level of theory. On the other hand, we employed an isodesmic reaction scheme within the macro pK_a framework; this was based on selecting reference molecules similar to the SAMPL7 challenge molecules. Consequently, highly well correlated pK_a values were obtained with the M062X/6-311+G(2df,2p)//M052X/6-31+G(d,p) level of theory.

On the faithfulness of molecular mechanics representations of proteins towards quantum-mechanical energy surfaces

Force fields based on molecular mechanics (MM) are the main computational tool to study the relationship between protein structure and function at the molecular level. To validate the quality of such force fields, high-level quantum-mechanical (QM) data are employed to test their capability to reproduce the features of all major conformational substates of a series of blocked amino acids. The phase-space overlap between MM and QM is quantified in terms of the average structural reorganization energies over all energy minima. Here, the structural reorganization energy is the MM potential-energy difference between the structure of the respective QM energy minimum and the structure of the closest MM energy minimum. Thus, it serves as a measure for the relative probability of visiting the QM minimum during an MM simulation. We evaluate variants of the AMBER, CHARMM, GROMOS and OPLS biomolecular force fields. In addition, the two blocked amino acids alanine and serine are used to demonstrate the dependence of the measured agreement on the QM method, the phase, and the conformational preferences. Blocked serine serves as an example to discuss possible improvements of the force fields, such as including polarization with Drude particles, or using tailored force fields. The results show that none of the evaluated force fields satisfactorily reproduces all energy minima. By decomposing the average structural reorganization energies in terms of individual energy terms, we can further assess the individual weaknesses of the parametrization strategies of each force field. The dominant problem for most force fields appears to be the van der Waals parameters, followed to a lesser degree by dihedral and bonded terms. Our results show that performing a simple QM energy optimization from an MM-optimized structure can be a first test of the validity of a force field for a particular target molecule.

A deep learning approach for the blind logP prediction in SAMPL6 challenge

Water octanol partition coefficient serves as a measure for the lipophilicity of a molecule and is important in the field of drug discovery. A novel method for computational prediction of logarithm of partition coefficient (logP) has been developed using molecular fingerprints and a deep neural network. The machine learning model was trained on a dataset of 12,000 molecules and tested on 2000 molecules. In this article, we present our results for the blind prediction of logP for the SAMPL6 challenge. While the best submission achieved a RMSE of 0.41 logP units, our submission had a RMSE of 0.61 logP units. Overall, we ranked in the top quarter out of the 92 submissions that were made. Our results show that the deep learning model can be used as a fast, accurate and robust method for high throughput prediction of logP of small molecules.

Quantum chemical predictions of water-octanol partition coefficients applied to the SAMPL6 logP blind challenge

Theoretical approaches for predicting physicochemical properties are valuable tools for accelerating the drug discovery process. In this work, quantum chemical methods are used to predict water-octanol partition coefficients as a part of the SAMPL6 blind challenge. The SMD continuum solvent model was employed with MP2 and eight DFT functionals in conjunction with correlation consistent basis sets to determine the water-octanol transfer free energy. Several tactics towards improving the predictions of the partition coefficient were examined, including increasing the quality of basis sets, considering tautomerization, and accounting for inhomogeneities in the water and n-octanol phases. Evaluation of these various schemes highlights the impact of modeling approaches across different methods. With the inclusion of tautomers and adjustments to the permittivity constants, the best predictions were obtained with smaller basis sets and the O3LYP functional, which yielded an RMSE of 0.79 logP units. The results presented correspond to the SAMPL6 logP submission IDs: DYXBT, O7DJK, and AHMTF.

Predicting partition coefficients of drug-like molecules in the SAMPL6 challenge with Drude polarizable force fields

The water-octanol partition coefficient is an important physicochemical property for small molecule drug design. Here, we report our participation in the SAMPL6 logP prediction challenge with free energy perturbation (FEP) calculations in the water phase and in the 1-octanol phase using Drude polarizable force fields. Root mean square error (RMSE) and mean absolute error (MAE) of our prediction are equal to 1.85 and 1.25 logP units. The errors are not evenly distributed. Out of eleven SAMPL6 solutes, FEP/Drude performed very badly on three molecules (deviations all larger than 2 logP units) but good on the remaining eight (deviations all less than 1 logP unit). We find while FEP converges well within one nanosecond in water, simulations in 1-octanol need much longer simulation time and possibly more independent runs for sampling. We also find out that 1-octanol, albeit being a non-polar solvent, still polarizes solute molecules and forms stable hydrogen bonds with them. At the end, we attempt to reweight FEP trajectories with QM/Drude calculations and discuss possible caveats in our simulation setup.

Use of Interaction Energies in QM/MM Free Energy Simulations

The use of the most accurate (i.e., QM or QM/MM) levels of theory for free energy simulations (FES) is typically not possible. Primarily, this is because the computational cost associated with the extensive configurational sampling needed for converging FES is prohibitive. To ensure the feasibility of QM-based FES, the "indirect" approach is generally taken, necessitating a free energy calculation between the MM and QM/MM potential energy surfaces. Ideally, this step is performed with standard free energy perturbation (Zwanzig's equation) as it only requires simulations be carried out at the low level of theory; however, work from several groups over the past few years has conclusively shown that Zwanzig's equation is ill-suited to this task. As such, many approximations have arisen to mitigate difficulties with Zwanzig's equation. One particularly popular notion is that the convergence of Zwanzig's equation can be improved by using interaction energy differences instead of total energy differences. Although problematic numerical fluctuations (a major problem when using Zwanzig's equation) are indeed reduced, our results and analysis demonstrate that this "interaction energy approximation" (IEA) is theoretically incorrect, and the implicit approximation invoked is spurious at best. Herein, we demonstrate this via solvation free energy calculations using IEA from two different low levels of theory to the same target high level. Results from this proof-of-concept consistently yield the wrong results, deviating by ∼1.5 kcal/mol from the rigorously obtained value.

Molecular Dynamics Simulations of Membrane Permeability

This Review illustrates the evaluation of permeability of lipid membranes from molecular dynamics (MD) simulation primarily using water and oxygen as examples. Membrane entrance, translocation, and exit of these simple permeants (one hydrophilic and one hydrophobic) can be simulated by conventional MD, and permeabilities can be evaluated directly by Fick's First Law, transition rates, and a global Bayesian analysis of the inhomogeneous solubility-diffusion model. The assorted results, many of which are applicable to simulations of nonbiological membranes, highlight the limitations of the homogeneous solubility diffusion model; support the utility of inhomogeneous solubility diffusion and compartmental models; underscore the need for comparison with experiment for both simple solvent systems (such as water/hexadecane) and well-characterized membranes; and demonstrate the need for microsecond simulations for even simple permeants like water and oxygen. Undulations, subdiffusion, fractional viscosity dependence, periodic boundary conditions, and recent developments in the field are also discussed. Last, while enhanced sampling methods and increasingly sophisticated treatments of diffusion add substantially to the repertoire of simulation-based approaches, they do not address directly the critical need for force fields with polarizability and multipoles, and constant pH methods.

A Comparison of QM/MM Simulations with and without the Drude Oscillator Model Based on Hydration Free Energies of Simple Solutes

Maintaining a proper balance between specific intermolecular interactions and non-specific solvent interactions is of critical importance in molecular simulations, especially when predicting binding affinities or reaction rates in the condensed phase. The most rigorous metric for characterizing solvent affinity are solvation free energies, which correspond to a transfer from the gas phase into solution. Due to the drastic change of the electrostatic environment during this process, it is also a stringent test of polarization response in the model. Here, we employ both the CHARMM fixed charge and polarizable force fields to predict hydration free energies of twelve simple solutes. The resulting classical ensembles are then reweighted to obtain QM/MM hydration free energies using a variety of QM methods, including MP2, Hartree⁻Fock, density functional methods (BLYP, B3LYP, M06-2X) and semi-empirical methods (OM2 and AM1 ). Our simulations test the compatibility of quantum-mechanical methods with molecular-mechanical water models and solute Lennard⁻Jones parameters. In all cases, the resulting QM/MM hydration free energies were inferior to purely classical results, with the QM/MM Drude force field predictions being only marginally better than the QM/MM fixed charge results. In addition, the QM/MM results for different quantum methods are highly divergent, with almost inverted trends for polarizable and fixed charge water models. While this does not necessarily imply deficiencies in the QM models themselves, it underscores the need to develop consistent and balanced QM/MM interactions. Both the QM and the MM component of a QM/MM simulation have to match, in order to avoid artifacts due to biased solute⁻solvent interactions. Finally, we discuss strategies to improve the convergence and efficiency of multi-scale free energy simulations by automatically adapting the molecular-mechanics force field to the target quantum method.

1-Butanol as a Solvent for Efficient Extraction of Polar Compounds from Aqueous Medium: Theoretical and Practical Aspects

The extraction of polar molecules from aqueous solution is a challenging task in organic synthesis. 1-Butanol has been used sporadically as an eluent for polar molecules, but it is unclear which molecular features drive its efficiency. Here, we employ free energy simulations to study the partitioning of 15 solutes between water and 1-butanol. The simulations demonstrate that the high affinity of polar molecules to the wet 1-butanol phase is associated with its nanostructure. Small inverse micelles of water are able to accommodate polar solutes and locally mimic an aqueous environment. We verify the simulations based on partition coefficients between water and 1-octanol, and include a blind prediction of the water/1-butanol partition coefficient of cyclohexane-1,2-diol. The calculations are in excellent agreement with experiment, reaching root-mean-square deviations below 0.7 kcal/mol. Actual extractions of cyclohexane-1,2-diol from buffer solutions that mimic cell lysates and suspensions in biocatalytic reactions further exemplify our findings. The yields highlight that extractions with 1-butanol can be significantly more efficient than the conventional protocol based on ethyl acetate.

On the convergence of multi-scale free energy simulations

In this work we employ simple model systems to evaluate the relative performance of two of the most important free energy methods: The Zwanzig equation (also known as "Free energy perturbation") and Bennett's acceptance ratio method (BAR). Although our examples should be transferable to other kinds of free energy simulations, we focus on applications of multi-scale free energy simulations. Such calculations are especially complex, since they connect two different levels of theory with very different requirements in terms of speed, accuracy, sampling and parallelizability. We try to reconcile all those different factors by developing some simple criteria to guide the early stages of the development of a free energy protocol. This is accomplished by quantifying how many λ intermediate steps and how many potential energy evaluations are necessary in order to reach a certain level of convergence.

Quantum mechanical force fields for condensed phase molecular simulations

Molecular simulations are powerful tools for providing atomic-level details into complex chemical and physical processes that occur in the condensed phase. For strongly interacting systems where quantum many-body effects are known to play an important role, density-functional methods are often used to provide the model with the potential energy used to drive dynamics. These methods, however, suffer from two major drawbacks. First, they are often too computationally intensive to practically apply to large systems over long time scales, limiting their scope of application. Second, there remain challenges for these models to obtain the necessary level of accuracy for weak non-bonded interactions to obtain quantitative accuracy for a wide range of condensed phase properties. Quantum mechanical force fields (QMFFs) provide a potential solution to both of these limitations. In this review, we address recent advances in the development of QMFFs for condensed phase simulations. In particular, we examine the development of QMFF models using both approximate and ab initio density-functional models, the treatment of short-ranged non-bonded and long-ranged electrostatic interactions, and stability issues in molecular dynamics calculations. Example calculations are provided for crystalline systems, liquid water, and ionic liquids. We conclude with a perspective for emerging challenges and future research directions.

Blind prediction of cyclohexane-water distribution coefficients from the SAMPL5 challenge

In the recent SAMPL5 challenge, participants submitted predictions for cyclohexane/water distribution coefficients for a set of 53 small molecules. Distribution coefficients (log D) replace the hydration free energies that were a central part of the past five SAMPL challenges. A wide variety of computational methods were represented by the 76 submissions from 18 participating groups. Here, we analyze submissions by a variety of error metrics and provide details for a number of reference calculations we performed. As in the SAMPL4 challenge, we assessed the ability of participants to evaluate not just their statistical uncertainty, but their model uncertainty-how well they can predict the magnitude of their model or force field error for specific predictions. Unfortunately, this remains an area where prediction and analysis need improvement. In SAMPL4 the top performing submissions achieved a root-mean-squared error (RMSE) around 1.5 kcal/mol. If we anticipate accuracy in log D predictions to be similar to the hydration free energy predictions in SAMPL4, the expected error here would be around 1.54 log units. Only a few submissions had an RMSE below 2.5 log units in their predicted log D values. However, distribution coefficients introduced complexities not present in past SAMPL challenges, including tautomer enumeration, that are likely to be important in predicting biomolecular properties of interest to drug discovery, therefore some decrease in accuracy would be expected. Overall, the SAMPL5 distribution coefficient challenge provided great insight into the importance of modeling a variety of physical effects. We believe these types of measurements will be a promising source of data for future blind challenges, especially in view of the relatively straightforward nature of the experiments and the level of insight provided.

Blind prediction of distribution in the SAMPL5 challenge with QM based protomer and pK a corrections

The computation of distribution coefficients between polar and apolar phases requires both an accurate characterization of transfer free energies between phases and proper accounting of ionization and protomerization. We present a protocol for accurately predicting partition coefficients between two immiscible phases, and then apply it to 53 drug-like molecules in the SAMPL5 blind prediction challenge. Our results combine implicit solvent QM calculations with classical MD simulations using the non-Boltzmann Bennett free energy estimator. The OLYP/DZP/SMD method yields predictions that have a small deviation from experiment (RMSD = 2.3 [Formula: see text] D units), relative to other participants in the challenge. Our free energy corrections based on QM protomer and [Formula: see text] calculations increase the correlation between predicted and experimental distribution coefficients, for all methods used. Unfortunately, these corrections are overly hydrophilic, and fail to account for additional effects such as aggregation, water dragging and the presence of polar impurities in the apolar phase. We show that, although expensive, QM-NBB free energy calculations offer an accurate and robust method that is superior to standard MM and QM techniques alone.