1
|
Rahimi AA, Alihosseini F. Application of dye saturated clay adsorbent from dyeing wastewater as textile printing pigment. JOURNAL OF CHEMICAL TECHNOLOGY & BIOTECHNOLOGY 2022; 97:3152-3162. [DOI: 10.1002/jctb.7183] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2022] [Accepted: 07/05/2022] [Indexed: 09/02/2023]
Abstract
AbstractBackgroundAdsorption by cheap materials (like clay and activated carbon) is one of the most effective methods for treating dye wastewaters, especially for cationic dyes. Although activated carbon has a black residue, the unique nanostructure of clay adsorbs dye molecules between its layers and produces a colored sludge. Dye intercalated clays were also introduced as possible coloring pigments. This work tries to combine the wastewater treatment and hybrid pigment production processes so that the remaining sludge of the process can be used as a printing pigment.ResultsBentonite clay was examined for treating real dye wastewater from the textile industry containing four cationic dyes. The adsorption mechanism of all dyes was studied individually, and the results show that bentonite has a minimum adsorption capacity of 467 mg/g for Basic Red 46 dye based on the Langmuir model. The adsorption process decreased the turbidity by about 86% and reduced the total dissolved solids (TDS) and chemical oxygen demand (COD) of wastewater. The produced hybrid showed a nano‐layer structure according to the field emission scanning electron microscopy (FESEM). Differential thermal analysis (DTA) shows that the thermal stability of the pigment improved by about 30 °C compared to the pristine dye. Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) showed that the dye: bentonite ratio should be adjusted at a medium level to control the hydrophilicity of the hybrid and improve its miscibility in binders.ConclusionThe produced pigment was printed on cotton fabric with a desirable visual color appearance and showed acceptable rubbing and light fastnesses. The result indicates that wastewater sludge from this adsorption process could be applicable as an industrial pigment. © 2022 Society of Chemical Industry (SCI).
Collapse
Affiliation(s)
- Abd Allah Rahimi
- Department of Textile Engineering Isfahan University of Technology Isfahan Iran
| | | |
Collapse
|
2
|
Auramine O UV Photocatalytic Degradation on TiO2 Nanoparticles in a Heterogeneous Aqueous Solution. Catalysts 2022. [DOI: 10.3390/catal12090975] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023] Open
Abstract
Amongst the environmental issues throughout the world, organic synthetic dyes continue to be one of the most important subjects in wastewater remediation. In this paper, the photocatalytic degradation of the dimethylmethane fluorescent dye, Auramine O (AO), was investigated in a heterogeneous aqueous solution with 100 nm anatase TiO2 nanoparticles (NPs) under 365 nm light irradiation. The effect of irradiation time was systematically studied, and photolysis and adsorption of AO on TiO2 NPs were also evaluated using the same experimental conditions. The kinetics of AO photocatalytic degradation were pseudo-first order, according to the Langmuir–Hinshelwood model, with a rate constant of 0.048 ± 0.002 min−1. A maximum photocatalytic efficiency, as high as 96.2 ± 0.9%, was achieved from a colloidal mixture of 20 mL (17.78 μmol L−3) AO solution in the presence of 5 mg of TiO2 NPs. The efficiency of AO photocatalysis decreased nonlinearly with the initial concentration and catalyst dosage. Based on the effect of temperature, the activation energy of AO photocatalytic degradation was estimated to be 4.63 kJ mol−1. The effect of pH, additional scavengers, and H2O2 on the photocatalytic degradation of AO was assessed. No photocatalytic degradation products of AO were observed using UV–visible and Fourier transform infrared spectroscopy, confirming that the final products are volatile small molecules.
Collapse
|
3
|
Seyfikar S, Asgharnejad-laskoukalayeha M, Hassan Jafari S, Goodarzi V, Hadi Salehi M, Zamanlui S. Introducing a New Approach to Preparing Bionanocomposite Sponges Based on Poly (glycerol sebacate urethane) (PGSU) with Great Interconnectivity and High Hydrophilicity Properties for Application in Tissue Engineering. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2022.111239] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
|
4
|
Adsorption Features of Various Inorganic Materials for the Drug Removal from Water and Synthetic Urine Medium: A Multi-Technique Time-Resolved In Situ Investigation. MATERIALS 2021; 14:ma14206196. [PMID: 34683794 PMCID: PMC8540798 DOI: 10.3390/ma14206196] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/20/2021] [Revised: 10/11/2021] [Accepted: 10/14/2021] [Indexed: 01/17/2023]
Abstract
Pharmaceutical active compounds, including hundreds of different substances, are counted among the emerging contaminants in waterbodies, whose presence raises a growing concern for the ecosystem. Drugs are metabolized and excreted mainly through urine as an unchanged active ingredient or in the form of metabolites. These emerging contaminants are not effectively removed with the technologies currently in use, making them a relevant environmental problem. This study proposes the treatment of urine and water at the source that can allow an easier removal of dissolved drugs and metabolites. The treatment of synthetic urine, with dissolved ibuprofen as a model compound, by adsorption, using various classes of inorganic materials, such as clays, hierarchical zeolites and ordered mesoporous silica (MCM-41), is presented. A multi-technique approach involving X-ray powder diffraction, solid-state NMR, UV-Vis and Raman spectroscopies was employed to investigate the adsorption process in inorganic adsorbents. Moreover, the uptake, the ensuing competition, the efficiency and selectivity as well as the packing of the model compound in ordered mesoporous silica during the incipient wetness impregnation process were all thoroughly monitored by a novel approach, involving combined complementary time-resolved in situ 1H and 13C MAS NMR spectroscopy as well as X-ray powder diffraction.
Collapse
|
5
|
Valandro SR, Poli AL, Correia TFA, Lombardo PC, Schmitt CC. Photophysical Behavior of Isocyanine/Clay Hybrids in the Solid State †. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2017; 33:891-899. [PMID: 28064495 DOI: 10.1021/acs.langmuir.6b03898] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
In the present study, we have attempted to investigate, for the first time, the photophysical behavior of 1,1'-diethyl-2,4'-cyanine (ICY)/clay mineral hybrids in the solid state. The effects promoted by ICY loading and clay type on the spectroscopic properties were studied by UV-vis diffuse reflectance spectroscopy (DR) and different fluorescence techniques. The hybrids were characterized by X-ray diffraction (XRD) and thermogravimetric analysis (TGA). UV-vis-DR revealed the formation of ICY H-aggregates in Wyoming montmorillonite (SWy-1) and Laponite (Lap); however, J-aggregates were predominant for ICY on Arizona (SAz-1) and Barasym (SYn-1) montmorillonites. The formation of J-aggregates was favored on clays with a high layer charge density (SAz-1 and SYn-1). Increasing ICY loading leads to an increase in H-aggregates, which become predominant in all of the samples. The fluorescence spectra of ICY-Lap and ICY-SYn-1 hybrids showed two emissive bands, and they were assigned to the monomeric and J-aggregate species. The fluorescence lifetime showed consistent and distinct values for the two species. The longer fluorescence lifetime can be assigned to the ICY monomers, while the second component has a short lifetime value and may be attributed to J-aggregate emission species. Moreover, confocal fluorescence micrographs showed two different fluorescent domains; monomers (greenish domain) and J-aggregates (orange domain) can be clearly distinguished. For ICY adsorbed on SWy-1 and SAz-1, the intensities of the fluorescence spectra were very low, and it was not possible to measure the fluorescence lifetimes due to high iron content in these clays, which acts as an efficient quencher of the excited singlet state of the dye molecules. XRD and TGA curves showed that the intercalation of ICY into the interlayer regions of SWy-1, SAz-1, and SYn-1 occurred for high dye concentration only. In the case of Laponite, ICY adsorbs on the external surface of the layer. Our studies indicate that the ICY-clays, in particular, ICY-SYn-1 and ICY-Lap, are promising hybrid materials with interesting optical and photophysical properties.
Collapse
Affiliation(s)
- Silvano R Valandro
- Instituto de Química de São Carlos, Universidade de São Paulo , Caixa Postal 780,13560-970 São Carlos SP, Brasil
| | - Alessandra L Poli
- Instituto de Química de São Carlos, Universidade de São Paulo , Caixa Postal 780,13560-970 São Carlos SP, Brasil
| | - Thaís F A Correia
- Instituto de Química de São Carlos, Universidade de São Paulo , Caixa Postal 780,13560-970 São Carlos SP, Brasil
| | - Patricia C Lombardo
- Instituto de Química de São Carlos, Universidade de São Paulo , Caixa Postal 780,13560-970 São Carlos SP, Brasil
| | - Carla C Schmitt
- Instituto de Química de São Carlos, Universidade de São Paulo , Caixa Postal 780,13560-970 São Carlos SP, Brasil
| |
Collapse
|
6
|
Mallakpour S, Behnamfar MT, Dinari M, Hadadzadeh H. Preparation of new fluorophore lanthanide complexes-Cloisite nanohybrids using the tricationic Pr(III), Gd(III) and Dy(III) complexes with 9,10-phenanthrenequinone. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2015; 137:1206-1212. [PMID: 25305612 DOI: 10.1016/j.saa.2014.08.136] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/25/2014] [Accepted: 08/31/2014] [Indexed: 06/04/2023]
Abstract
New fluorophore lanthanide complexes-Cloisite (LCs-C) nanohybrids have been prepared by the intercalation reaction of Cloisite Na(+) with the tricationic lanthanide complexes (1-3), [M(PQ)3(DMF)2(H2O)2](3+) (M=Pr(III) (1), Gd(III) (2), and Dy(III) (3); PQ=9,10-phenanthrenequinone), in aqueous solutions. The X-ray diffraction analysis of the modified clays (LCs-C) showed an increase in the interlayer distance (d) as compared to the pure Cloisite Na(+). Field-emission scanning electron microscopy (FE-SEM) was used to study the morphology of the modified clays and the results were demonstrated a homogeneous morphology for the nanohybrids. The thermal behavior of the LCs-C nanohybrids was investigated using thermogravimetric analysis. Solid-state fluorescence properties of the LCs-C nanohybrids were also investigated. The results show that all tricationic complexes have a significant fluorescence at room temperature when the complexes are adsorbed onto Cloisite.
Collapse
Affiliation(s)
- Shadpour Mallakpour
- Organic Polymer Chemistry Research Laboratory, Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111, Iran; Nanotechnology and Advanced Materials Institute, Isfahan University of Technology, Isfahan 84156-83111, Iran; Center of Excellence in Sensors and Green Chemistry, Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111, IR, Iran.
| | | | - Mohammad Dinari
- Organic Polymer Chemistry Research Laboratory, Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111, Iran; Nanotechnology and Advanced Materials Institute, Isfahan University of Technology, Isfahan 84156-83111, Iran
| | - Hassan Hadadzadeh
- Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111, Iran
| |
Collapse
|
7
|
Mallakpour S, Dinari M, Hadadzadeh H, Daryanavard M, Roudi F. Preparation, Characterization and Solid-State Emission of Metal Complex-Cloisite Nanohybrids (MC-C, M = Ru (II) and Cu (II)). J Fluoresc 2014; 24:1841-8. [DOI: 10.1007/s10895-014-1472-2] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2014] [Accepted: 09/29/2014] [Indexed: 10/24/2022]
|
8
|
Kianfar AH, Mahmood WAK, Dinari M, Azarian MH, Khafri FZ. Novel nanohybrids of cobalt(III) Schiff base complexes and clay: synthesis and structural determinations. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2014; 127:422-8. [PMID: 24637279 DOI: 10.1016/j.saa.2014.02.089] [Citation(s) in RCA: 28] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/01/2013] [Revised: 02/01/2014] [Accepted: 02/19/2014] [Indexed: 05/25/2023]
Abstract
The [Co(Me(2)Salen)(PBu(3))(OH(2))]BF4 and [Co(Me(2)Salen)(PPh(3))(Solv)]BF(4), complexes were synthesized and characterized by FT-IR, UV-Vis, (1)H NMR spectroscopy and elemental analysis techniques. The coordination geometry of [Co(Me(2)Salen)(PPh(3))(H(2)O)]BF(4) was determined by X-ray crystallography. It has been found that the complex is containing [Co(Me(2)Salen)(PPh(3))(H(2)O)]BF(4) and [Co(Me(2)Salen)(PPh(3))(EtOH)]BF(4) hexacoordinate species in the solid state. Cobalt atom exhibits a distorted octahedral geometry and the Me(2)Salen ligand has the N2O2 coordinated environment in the equatorial plane. The [Co(Me(2)Salen)(PPh(3))(H(2)O)]BF(4) complex shows a dimeric structure via hydrogen bonding between the phenolate oxygen and hydrogens of coordinated H2O molecule. These complexes were incorporated into Montmorillonite-K10 nanoclay. The modified clays were identified by FT-IR, XRD, EDX, TGA/DTA, SEM and TEM techniques. According to the XRD results of the new nanohybrid materials, the Schiff base complexes are intercalated in the interlayer spaces of the clay. SEM and TEM micrographs show that the resulting hybrid nanomaterials have layer structures. Also, TGA/DTG results show that the intercalation reaction was taken place successfully.
Collapse
Affiliation(s)
- Ali Hossein Kianfar
- Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111, Iran.
| | | | - Mohammad Dinari
- Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111, Iran
| | | | - Fatemeh Zare Khafri
- Department of Chemistry, College of Sciences Yasouj University, Yasouj, Iran
| |
Collapse
|