Isoflavone aglycons-sulfobutyl ether-β-cyclodextrin inclusion complexes: in solution and solid state studies

Cyclodextrin Inclusion Complexes for Improved Drug Bioavailability and Activity: Synthetic and Analytical Aspects

Many active pharmaceutical ingredients show low oral bioavailability due to factors such as poor solubility and physical and chemical instability. The formation of inclusion complexes with cyclodextrins, as well as cyclodextrin-based polymers, nanosponges, and nanofibers, is a valuable tool to improve the oral bioavailability of many drugs. The microencapsulation process modifies key properties of the included drugs including volatility, dissolution rate, bioavailability, and bioactivity. In this context, we present relevant examples of the stabilization of labile drugs through the encapsulation in cyclodextrins. The formation of inclusion complexes with drugs belonging to class IV in the biopharmaceutical classification system as an effective solution to increase their bioavailability is also discussed. The stabilization and improvement in nutraceuticals used as food supplements, which often have low intestinal absorption due to their poor solubility, is also considered. Cyclodextrin-based nanofibers, which are polymer-free and can be generated using environmentally friendly technologies, lead to dramatic bioavailability enhancements. The synthesis of chemically modified cyclodextrins, polymers, and nanosponges based on cyclodextrins is discussed. Analytical techniques that allow the characterization and verification of the formation of true inclusion complexes are also considered, taking into account the differences in the procedures for the formation of inclusion complexes in solution and in the solid state.

Solvent-Free Formation of Cyclodextrin-Based Pseudopolyrotaxanes of Polyethylene Glycol: Kinetic and Structural Aspects

Pseudopolyrotaxanes (PPRs) are supramolecular structures consisting of macrocycles able to thread on a linear polymer chain in a reversible, non-covalent way, often referred to in the literature as “molecular necklaces”. While the synthesis and reaction mechanisms of these structures in solution have been widely described, their solvent-free production has received little attention, despite the advantages that this route may offer. We propose in this work a kinetic mechanism that describes the PPR formation in the solid phase as a process occurring in two consecutive stages. This mechanism has been used to investigate the spontaneous formation of a PPR that occurs when grinding α-Cyclodextrin (α-CD) with polyethylene glycol (PEG). In the threading stage, the inclusion of the polymer and subsequent release of the water molecules lodged in the cavity of the macrocycle cause vibrational changes that are reflected in the time-dependence of the FTIR-ATR spectra, while the further assembly of PPRs to form crystals produces characteristic reflections in the XRD patterns, due to the channel-like arrangement of CDs, that can be used to track the formation of the adduct in crystalline form. The effects that working variables have on the kinetics of the reaction, such as temperature, feed ratio, molar mass of the polymer and the introduction of an amorphous block in the polymer structure, have been investigated. The rate constants of the threading step increase with the temperature and the activation energy of the process increases at lower proportions of CD to PEG. This is attributed to the lower degree of covering of the polymer chain with CDs that reduces the hydrogen-bonding driven stabilization between adjacent macrocycles. The formation of crystalline PPR, which takes place slowly at room temperature, is markedly promoted at higher temperatures, with lower proportions of CD favoring both the formation and the growth of the crystals. The molar mass of the polymer does not modify the typical channel-like arrangement of packed PPRs but the conversion into crystalline PPR diminishes when using PEG1000 instead of PEG400. At a microscopic level, the crystals arrange into lamellar structures, in the order of hundreds of nm, embedded in an amorphous-like matrix. The introduction of a polypropylene oxide block in the structure of the polymer (Pluronic L62) renders poorer yields and a considerable loss of crystallinity of the product of the reaction. The methodology here proposed can be applied to the general case of inclusion complexes of CDs with drugs in the solid phase, or to multicomponent systems that contain polymers as excipients in pharmaceutical formulations along with CDs.

Temperature-Dependent Dynamical Evolution in Coum/SBE-β-CD Inclusion Complexes Revealed by Two-Dimensional FTIR Correlation Spectroscopy (2D-COS)

A combination of Fourier transform infrared spectroscopy in attenuated total reflectance geometry (FTIR-ATR) and 2D correlation analysis (2D-COS) was applied here for the first time in order to investigate the temperature-dependent dynamical evolution occurring in a particular type of inclusion complex, based on sulfobutylether-β-cyclodextrin (SBE-β-CD) as hosting agent and Coumestrol (7,12-dihydorxcoumestane, Coum), a poorly-soluble active compound known for its anti-viral and anti-oxidant activity. For this purpose, synchronous and asynchronous 2D spectra were calculated in three different wavenumber regions (960-1320 cm^-1, 1580-1760 cm^-1 and 2780-3750 cm^-1) and over a temperature range between 250 K and 340 K. The resolution enhancement provided by the 2D-COS offers the possibility to extract the sequential order of events tracked by specific functional groups of the system, and allows, at the same time, the overcoming of some of the limits associated with conventional 1D FTIR-ATR analysis. Acquired information could be used, in principle, for the definition of an optimized procedure capable to provide high-performance T-sensitive drug carrier systems for different applications.

Rutin-Loaded Solid Lipid Nanoparticles: Characterization and In Vitro Evaluation

This study was aimed at preparing and characterizing solid lipid nanoparticles loading rutin (RT-SLNs) for the treatment of oxidative stress-induced diseases. Phospholipon 80H® as a solid lipid and Polysorbate 80 as surfactant were used for the SLNs preparation, using the solvent emulsification/diffusion method. We obtained spherical RT-SLNs with low sizes, ranging from 40 to 60 nm (hydrodynamic radius) for the SLNs prepared starting from 2% and 5% (w/w) theoretical amount. All prepared formulations showed negative zeta-potential values. RT was efficiently encapsulated within SLNs, obtaining high encapsulation efficiency and drug content percentages, particularly for SLNs prepared with a 5% theoretical amount of RT. In vitro release profiles and analysis of the obtained data applying different kinetic models revealed Fickian diffusion as the main mechanism of RT release from the SLNs. The morphology of RT-SLNs was characterized by scanning electron microscopy (SEM), whereas the interactions between RT and the lipid matrix were investigated by Raman spectroscopy, evidencing spectral modifications of characteristic bands of RT due to the establishment of new interactions. Finally, antioxidant activity assay on human glioblastoma astrocytoma (U373) culture cells showed a dose-dependent activity for RT-SLNs, particularly at the highest assayed dose (50 μM), whereas the free drug showed the lesser activity.

Preparation and Characterization of a Modified-β-Cyclodextrin/β-Carotene Inclusion Complex and Its Application in Pickering Emulsions

β-Cyclodextrin (β-CD) was modified using octenyl succinic anhydride (OSA) to introduce amphiphilic groups (hydrophilic carboxyl and lipophilic octenyl chains) by esterification under alkaline conditions. The FT-IR results indicated that the OSA-modified β-CD (OCD) showed new absorption peaks of an ester bond and a carboxylate (RCOO^-) at 1724 and 1570 cm^-1, respectively, confirming the successful preparation of OCD. Then the embedding effects of β-CD and OCD on β-carotene and the emulsifying and antioxidant properties of their inclusion complexes were evaluated. The results of XRD showed that the β-CD (or OCD)/β-carotene inclusion complexes were converted from a cage-type structure to a channel-type structure. AFM and SEM showed that the crystal characteristics and surface morphologies of the inclusion complexes were different from those of the physical mixture. The emulsion stabilized by OCD exhibited smaller droplet sizes and larger zeta-potentials than that stabilized by β-CD. In addition, the inclusion complexes-prepared emulsion exhibited lower POV values and TBARS contents than did the physical mixture. OCD/β-carotene inclusion complexes can improve the physical and oxidative stability of the emulsion, which is of great significance to the food industry.

Physicochemical Characterization and Antioxidant Activity Evaluation of Idebenone/Hydroxypropyl-β-Cyclodextrin Inclusion Complex †

Idebenone (IDE) is an antioxidant drug active at the level of the central nervous system (CNS), whose poor water solubility limits its clinical application. An IDE/2-hydroxypropyl-β-cyclodextrin (IDE/HP-β-CD) inclusion complex was investigated by combining experimental methods and theoretical approaches. Furthermore, biological in vitro/ex vivo assays were performed. Phase solubility studies showed an A_L type diagram, suggesting the presence of a 1:1 complex with high solubility. Scanning electron microscopy (SEM) allowed us to detect the morphological changes upon complexation. The intermolecular interactions stabilizing the inclusion complex were experimentally characterized by exploring the complementarity of Fourier-transform infrared spectroscopy in attenuated total reflectance geometry (FTIR-ATR) with mid-infrared light, Fourier-transform near-infrared (FT-NIR) spectroscopy, and Raman spectroscopy. From the temperature evolution of the O–H stretching band of the complex, the average enthalpy ΔH_HB of the hydrogen bond scheme upon inclusion was obtained. Two-dimensional (2D) rotating frame Overhauser effect spectroscopy (ROESY) analysis and computational studies involving molecular modeling and molecular dynamics (MD) simulation demonstrated the inclusion of the quinone ring of IDE inside the CD ring. In vitro/ex vivo studies evidenced that complexation produces a protective effect of IDE against the H₂O₂-induced damage on human glioblastoma astrocytoma (U373) cells and increases IDE permeation through the excised bovine nasal mucosa.

Encapsulation of Vitamin E and Soy Isoflavone Using Spiral Dextrin: Comparative Structural Characterization, Release Kinetics, and Antioxidant Capacity during Simulated Gastrointestinal Tract

Spiral dextrin subfraction (SD-40) obtained through enzyme debranching and gradient ethanol precipitation could interact with vitamin E (VE) or soy isoflavone (SIO) to form V-type inclusion complexes. The formation of two inclusion complexes was confirmed by Fourier transform-infrared spectroscopy, atomic force microscopy, and differential scanning calorimetry. In this study, an in vitro gastrointestinal model was used to investigate the breakdown of inclusion complexes and release behavior of bioactive compounds. The results indicated that the two inclusion complexes exhibited a controlled and sustained release behavior during digestion. In addition, the SD-40/VE inclusion complex presented higher stability and stronger antioxidant capacity than the SD-40/SIO inclusion complex. Furthermore, the first and zero order models were applied to understand the release kinetics of VE and SIO from inclusion complexes in the stomach, whereas the first order model was chosen to describe the release of VE and SIO from inclusion complexes in the intestine.

Cyclodextrin encapsulation of daidzein and genistein by grinding: implication on the glycosaminoglycan accumulation in mucopolysaccharidosis type II and III fibroblasts

This work aimed to investigate the potential effect of cyclodextrin encapsulation on intrinsic ability of daidzein (DAD) and genistein (GEN) to inhibit the glycosaminoglycan (GAG) synthesis in fibroblasts originating from patients with mucopolysaccharidosis (MPS), type II and III. DAD or GEN encapsulation with either 2-hydroxypropyl-β-cyclodextrin or sulphobuthylether-β-cyclodextrin were achieved by neat grinding and were characterised by thermal analysis, X-ray powder diffraction, scanning electron microscopy and solubility testing which confirmed the complexes formation with increased solubility with respect to starting compounds. Both isoflavones, as well as their co-ground cyclodextrin complexes reduced GAG levels in the fibroblasts of MPS II and MPS III patients from 54.8-77.5%, in a dose dependent manner, without any significant cytotoxic effect. Cyclodextrin encapsulation did not change the intrinsically high effect of both DAD and GEN on the GAG level reduction in the treated cells, thus could be considered as a part of combination therapies of MPS.

Solute-Solvent Interactions in Aqueous Solutions of Sulfobutyl Ether-β-cyclodextrin As Probed by UV-Raman and FTIR-ATR Analysis

A vibrational study by means of UV-Raman and FTIR-ATR measurements has been performed on sulfobutyl ether β-cyclodextrin (SBE-β-CD)-water solutions, as a function of concentration and temperature, with the aim to provide a molecular-scale explanation of the enhanced performances as carrier agent exhibited by this modified macrocycle with respect to natural cyclodextrin. The attention has been mainly paid to the modifications induced on the vibrational band assigned to the O-H stretching intramolecular mode, in turn related to the dynamical rearrangement occurring in the hydrogen bonding (HB) network of water molecules. The results of our measurements clearly showed a characteristic "structure-breaker" effect on the tetrahedral HB arrangements induced on water molecules by increasing of both temperature and solute concentration, allowing us to also extract thermodynamic parameters. These results could be a key step for a clearer understanding of the connection between the dynamical properties of hydration water and the complexing ability of this cyclodextrin derivative.