Relationship between the fibroblastic behaviour and surface properties of RGD-immobilized PCL membranes

Chitosan-based films grafted with citrus waste-derived antifungal agents: An innovative and sustainable approach to enhance post-harvest preservation of citrus fruit

This paper reports the synthesis, characterization, and properties of chitosan films (CHI) grafted with a natural antifungal agent with the aim of developing active films of natural origin to prevent post-harvest losses of citrus fruit. The antifungal agent was prepared by fermentation using lemon peel (AntiFun-LM), a citrus waste, and grafted on chitosan using different coupling agents (CHI/AntiFun-LM). Bioactive films were prepared by solvent casting. FTIR-ATR and ToF-SIMS analyses provided compelling evidence of the successful grafting process. TGA-DSC demonstrated that the films are stable after grafting. SEM studies showed the continuous and compact surface of the films. WCA measurements proved that CHI/AntiFun-LM films are more hydrophilic than CHI films. Moreover, the CHI/AntiFun-LM films showed stronger UV shielding effect when compared to CHI. The biological evaluation demonstrated that CHI/AntiFun-LM films gained considerable antifungal properties against most fungi responsible for post-harvest decay. Cytotoxicity tests showed that CHI/AntiFun-LM films did not cause any toxic effect against L929 fibroblasts. This study highlights the great potential of chemical grafting of antifungal agents produced from citrus waste to chitosan and preparation of natural-based films to act as a powerful alternative in post-harvest protection of citrus fruit in a perspective of circular economy.

Co-Immobilization of Ce6 Sono/Photosensitizer and Protonated Graphitic Carbon Nitride on PCL/Gelation Fibrous Scaffolds for Combined Sono-Photodynamic Cancer Therapy

Aiming at developing a moderate and efficient sono-photodynamic therapy for breast cancer, tissue engineering scaffolds may provide an easy and efficient strategy to eliminate serious side effects in conventional surgery or chemotherapy, and thus, they are highly desired. However, the development of ideal sono-photodynamic therapeutic scaffolds is always hindered by the poor stability and incompatibility between the different biomaterial components. Herein, the Food and Drug Administration (FDA)-approved sono/photosensitizer Chlorin e6 (Ce6) was successfully and tightly incorporated into electrospun polycaprolactone/gelatin (PG) scaffolds via positively charged protonated g-C₃N₄ nanosheets (pCN). The PG fibers were precoated with graphene oxide (GO) to enable the assembly of pCN on the surface through electrostatic interactions. The Ce6@pCN-GO-PG composite scaffolds exhibited good cytocompatibility and excellent sono-photodynamic activity, leading to distinctly boosted reactive oxygen species (ROS) generation and a 95.8% inactivation rate of breast cancer cells through a synergistic sono-photodynamic process triggered by an 808 nm laser and 1 MHz ultrasound (US) excitation, within the clinical therapeutic dose. The as-developed scaffolds with unique ultrasound cavitation therapeutic effects can be used not only for complete eradication of tumor cells after surgery but also as a cell behavior observation platform of sono-photodynamic cancer therapy.

Decoupling polymer properties to elucidate mechanisms governing cell behavior

Determining how a biomaterial interacts with cells ("structure-function relationship") reflects its eventual clinical applicability. Therefore, a fundamental understanding of how individual material properties modulate cell-biomaterial interactions is pivotal to improving the efficacy and safety of clinically translatable biomaterial systems. However, due to the coupled nature of material properties, their individual effects on cellular responses are difficult to understand. Structure-function relationships can be more clearly understood by the effective decoupling of each individual parameter. In this article, we discuss three basic decoupling strategies: (1) surface modification, (2) cross-linking, and (3) combinatorial approaches (i.e., copolymerization and polymer blending). Relevant examples of coupled material properties are briefly reviewed in each section to highlight the need for improved decoupling methods. This follows with examples of more effective decoupling techniques, mainly from the perspective of three primary classes of synthetic materials: polyesters, polyethylene glycol, and polyacrylamide. Recent strides in decoupling methodologies, especially surface-patterning and combinatorial techniques, offer much promise in further understanding the structure-function relationships that largely govern the success of future advancements in biomaterials, tissue engineering, and drug delivery.

Integrin α4 impacts on differential adhesion of preadipocytes and stem cells on synthetic polymers

Stem cells represent an ideal cell source for tissue engineering and regenerative medicine, because they can be readily isolated, expanded, differentiated and transplanted. For stem cell-based therapies, biomaterials are required to allow for a spatial distribution of the stem cells within a defined area in the body. In our recent studies, we analysed the interaction of a large panel of stem cell types with an array of biomaterials and demonstrated that a rational prediction of stem cell behaviour on a specific biomaterial is so far not possible. Interestingly, even ontogenetically related stem cell types, such as mesenchymal stem cells (MSCs), preadipocytes and dental pulp stem cells (DPSCs), exhibit distinct adhesion properties on the very same biomaterial surface. Therefore, we investigated integrin and extracellular matrix (ECM) protein expression of stem cells to relate gene expression to adhesion behaviour. MSCs, preadipocytes and DPSCs were cultured on selected synthetic polymers, such as Texin, a thermoplastic polyurethane, poly(dimethyl siloxane) (PDMS), poly-d,l-lactic acid (PDLLA) and l-lactic acid-trimehylene carbonate (Resomer® LT706). Integrins and ECM proteins were analysed by RT-PCR, real-time PCR and immunohistochemistry. Analysis of several adhesion molecules yielded that only one molecule, integrin α4, might play a significant role in differential adhesion on polymers for preadipocytes compared to DPSCs and MSCs. Thus, our studies on the molecular interactions of stem cells and polymers are expected to lead to a more profound understanding of the stem cell-biomaterial interactions to eventually allow for a rational biomaterial design.

Osteogenic activities of MC3T3-E1 cells on heparin-immobilized poly(caprolactone) membranes

The aim of this study was to investigate the effects of heparin on the activity of osteoblast-like cells seeded on poly(caprolactone) (PCL) membranes. The membranes were prepared by solvent-casting technique in ~150 µm thickness. Then they were treated with 1,6-hexanediamine solution and functionalized with covalently bound heparin. The morphology, proliferation, and differentiation of MC3T3-E1 preosteoblasts on these membranes were investigated in vitro. The heparin functionalized PCL membranes, compared to non-functionalized membranes, significantly stimulated osteoblast proliferation. The Scanning electron microscope images confirmed the stimulative effect of covalently bound heparin on the osteoblast-like cell proliferation. The alkaline phosphatase and osteocalcin levels for cells proliferated on heparin containing PCL membranes were higher than that of nonfunctionalized membranes.

Effect of functionalized polycaprolactone on the behaviour of murine preosteoblasts

The efficiency of biomaterials used in bone repair depends greatly on their ability to interact with bone cells. Hence, we have functionalized polycaprolactone (PCL) films by peptides derived from the bone sialoprotein containing RGD sequence (pRGD), to increase their ability to interact with murine MC3T3-E1 preosteoblasts, and favour cell response to recombinant human bone morphogenetic protein-2 (rhBMP-2). RGE peptides (pRGE) were used as negative controls. The PCL films were hydrolyzed with NaOH and then carboxylic acid groups were activated to allow chemisorption of the peptides. Alkaline treatment increased the hydrophilicity of PCL films without significantly change their roughness. Peptide immobilization on PCL was checked by X-ray photoelectron spectroscopy. Hydrolyzed PCL films (Hydro PCL), which adsorbed fibronectin and vitronectin from serum after 1 h incubation, prevented the spreading of MC3T3-E1 preosteoblasts, while films bearing pRGD or pRGE did not. In contrast, MC3T3-E1 preosteoblasts attached to pRGD and incubated for 1 h in serum-free medium spread better than cells on Hydro PCL or pRGE. Only cells on pRGD had organized cytoskeleton, phosphorylated focal adhesion kinase on Y(397) and responded to rhBMP-2 by activating Smad pathway. Thus, pRGD PCL may be used to favour bone cell cytoskeletal organization and response to rhBMP-2.