Carboxymethyl cellulose (CMC) based semi-IPNs as carriers for controlled release of ciprofloxacine: an in-vitro dynamic study

Pd@Na-CMC/g-C3N4: A nanostructured catalyst system based on sodium carboxymethyl cellulose/graphitic carbon nitride hydrogel beads and its performance in the treatment of organic and inorganic pollutants in water

The chemical reduction of organic or inorganic water contaminants is very important for both human health and pollution control. However, challenges still persist in preparing catalysts for chemical reduction, and there is a need for the development of inexpensive, easily synthesized, and effective catalyst systems. In this study, we have synthesized a new palladium nanocatalyst supported on the composite hydrogel beads composed of sodium carboxymethyl cellulose (Na-CMC) and graphitic carbon nitride (g-C3N4). The Pd@Na-CMC/g-C3N4 composite was fully characterized using FE-SEM, XRD, BET, EDS, TEM, and EDS mapping analysis, confirming its successful preparation at the nano-scale. Pd@Na-CMC/g-C3N4 was utilized to reduce various nitroaromatics such as 4-nitrophenol (4-NP), 2-nitrophenol (2-NA), 4-nitroaniline (4-NA), 4-nitro-o-phenylenediamine (4-NPDA), and organic dyes including methylene blue (MB), methyl orange (MO), Rhodamine B (RhB), as well as potassium hexacyanoferrate(III) (K3[Fe(CN)6]), which is the inorganic contaminant. While Pd@Na-CMC/g-C3N4 completely reduced nitroaromatics within 65-120 s at 1 × 10-4 M concentration, organic dyes within 0-60 s at 1 × 10-5 M concentration, and K3[Fe(CN)6] within 90 s at 0.002 M concentration in water at room temperature. Rate constant values (kapp) of 4-NP, 2-NA, 4-NA, 4-NPDA, MO, RhB, and K3[Fe(CN)6] were calculated to be 0.0085 s-1, 0.012 s-1, 0.016 s-1, 0.01 s-1, 0.013 s-1, 0.021 s-1, and 0.015 s-1, respectively. Additionally, the Pd@Na-CMC/g-C3N4 displayed high stability and even after four consecutive runs, it was able to reduce 4-NP and MO without any significant loss in its performance.

An efficient wastewater treatment through reduction of organic dyes using Ag nanoparticles supported on cellulose gum beads

This work reports silver nanoparticles (AgNPs) supported on biopolymer carboxymethyl cellulose beads (Ag-CMC) serves as an efficient catalyst in the reduction process of p-nitrophenol (p-NP) and methyl orange (MO). For Ag-CMC synthesis, first CMC beads were prepared by crosslinking the CMC solution in aluminium nitrate solution and then the CMC beads were introduced into AgNO3 solution to adsorb Ag ions. Field emission scanning electron microscopy (FE-SEM) analysis suggests the uniform distribution of Ag nanoparticles on the CMC beads. The X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis revealed the metallic and fcc planes of AgNPs, respectively, in the Ag-CMC catalyst. The Ag-CMC catalyst exhibits remarkable reduction activity for the p-NP and MO dyes with the highest rate constant (kapp) of a chemical reaction is 0.519 and 0.697 min-1, respectively. Comparative reduction studies of Ag-CMC with CMC, Fe-CMC and Co-CMC disclosed that Ag-CMC containing AgNPs is an important factore in reducing the organic pollutants like p-NP and MO dyes. During the recyclability tests, the Ag-CMC also maintained high reduction activity, which suggests that CMC protects the AgNPs from leaching during dye reduction reactions.

NANOCOMPOSITES BASED ON SINGLECOMPONENT AND MULTICOMPONENT POLYMER MATRICES FOR BIOMEDICAL APPLICATIONS

The review is devoted to analysis of the publications in the area of polymers of biomedical applications. Different types of the polymer matrices for drug delivery are analyzed, including polyurethanes, hydroxyacrylates, and multicomponent polymer matrices, which created by method of interpenetrating polymer networks. Particular attention is paid to description of synthesized and investigated nanocomposites based on polyurethane / poly (2-hydroxyethyl methacrylate) polymer matrix and nanooxides modified by biologically active compounds.

Fabrication of thermo-sensitive lignocellulose hydrogels with switchable hydrophilicity and hydrophobicity through an SIPN strategy

Herein, thermo-sensitive lignocellulose hydrogels with varying lignin contents were fabricated with N-isopropylacrylamide (NIPAAm) by a semi-interpenetrating polymer network (SIPN) strategy using a LiCl/DMSO solvent system. Soda lignin mixed with the lignocellulose/LiCl/DMSO solution was also used to prepare the composite hydrogels, and the influence of the existential state of lignin on the hydrogel properties was analyzed objectively. The SIPN hydrogels exhibited more favorable mechanical properties due to the physical entanglement of poly-NIPAAm and lignocellulose. The presence of externally added lignin in the composite hydrogels is beneficial for mechanical improvement. Both the mechanical properties and the morphologies of the SIPN hydrogels can be tuned by varying the existential state and content of lignin. Furthermore, the prepared SIPN hydrogels showed rapid conversion from being hydrophilic at 20 °C to being hydrophobic at 45 °C. All SIPN hydrogels exhibited obvious oil absorbency in an oil/water mixture at 45 °C. Moreover, the different lignin existential states in the hydrogels resulted in different lower critical solution temperatures (LCST). This study provides a feasible route to produce reinforced thermo-sensitive hydrogels and develops a method for tailoring the morphology and the absorption properties of hydrogels by controlling the existential state and content of lignin.

This study provides a feasible route to produce reinforced thermo-sensitive hydrogels and tailor their morphologies and absorption properties by controlling the state and content of lignin.

Magnetically mediated release of ciprofloxacin from polyvinyl alcohol based superparamagnetic nanocomposites

Polymer nanocomposites exhibiting superparamagnetic behavior have been recognized as a promising tool to achieve targeted drug delivery using external magnetic field for treating complex diseases like cancers and tumors. The present investigation attempts to design a superparamagnetic nanocomposite which could desirably deliver ciprofloxacin drug by application of varying magnetic field. In order to achieve the proposed objectives, a polymer matrix of polyvinyl alcohol-g-polymethyl methacrylate was prepared by free radical polymerization and iron oxide particles were impregnated by in situ precipitation method. The prepared nanocomposites were characterized by techniques like FTIR, electron microscopy (SEM and TEM) and XRD and magnetization studies were performed to ensure superparamagnetic behavior. The antibiotic drug ciprofloxacin was loaded onto the magnetic nanocomposites and the influence of various factors such as percent loading, chemical composition of the nanocomposite, applied magnetic field, pH of the release medium were investigated on the release profiles of the drug. The chemical integrity of the drug and its antibacterial potential were also studied. The dynamics of the release process was also examined mechanistically.