Study on physicochemical properties and in vitro bioactivity of tricalcium silicate-calcium carbonate composite bone cement

Root canal irrigants effect on the compressive strength and calcium ion release of Biodentine

Compressive strength and calcium ion release are integral properties of Biodentine for its enhanced efficiency. The present study evaluated the effects of Dual Rinse HEDP (DR HEDP), ethylenediaminetetraacetic acid (EDTA) and sodium hypochlorite (NaOCl) on the calcium ion release and compressive strength of Biodentine. Eighty Biodentine specimens were moulded and randomly divided into four groups (n = 20). Samples in group 1 were treated with 17 % EDTA; group 2 with DR HEDP; group 3 with 2.5 % NaOCl; and group 4 with distilled water. Samples were immersed in 10 mL of the test solutions for 1 min. The mean concentration of the calcium ion released was measured using atomic absorption spectrophotometry. The remaining 40 samples were tested for their compressive strength. Significant differences were determined among all the irrigants tested for calcium ion release and compressive strength. Samples treated with NaOCl had the lowest calcium ion release, while samples treated with 17 % EDTA had the largest calcium ions. No significant differences were measured between DR HEDP or distilled water. For compressive strength, samples treated with 2.5 % NaOCl had the lowest strength, while the highest values were obtained with distilled water. There was a significant difference between DR HEDP and EDTA, in which EDTA reduced the compressive strength significantly more than DR HEDP. DR HEDP had less detrimental effect on the calcium ion release and compressive strength of Biodentine.

Bioactive ceramic-based materials: beneficial properties and potential applications in dental repair and regeneration

Bioactive ceramics, primarily consisting of bioactive glasses, glass-ceramics, calcium orthophosphate ceramics, calcium silicate ceramics and calcium carbonate ceramics, have received great attention in the past decades given their biocompatible nature and excellent bioactivity in stimulating cell proliferation, differentiation and tissue regeneration. Recent studies have tried to combine bioactive ceramics with bioactive ions, polymers, bioactive proteins and other chemicals to improve their mechanical and biological properties, thus rendering them more valid in tissue engineering scaffolds. This review presents the beneficial properties and potential applications of bioactive ceramic-based materials in dentistry, particularly in the repair and regeneration of dental hard tissue, pulp-dentin complex, periodontal tissue and bone tissue. Moreover, greater insights into the mechanisms of bioactive ceramics and the development of ceramic-based materials are provided.

Ball Milling Medium May Tune the Self-Curing Property and Root Canal Microleakage of β-Dicalcium Silicate-Based Cement

It is still a challenge to overcome the extended setting process of pure Ca-silicate as root canal fillers. We investigated the effects of attapulgite (a basic hydrous silicate of magnesium and aluminum) and ball-milling liquid medium on the self-curing properties of conventional β-dicalcium silicate (C2Si)-based cements. It was shown that a minor amount of attapulgite nanofibers (1–4%) had only a slight influence on setting time but caused a large increase in compressive resistance and structural stability. In particular, the ball milling media with different acetone/water ratios (3:0, 2:1, 1:2, 0:3) could directly influence the particle size distribution of C2Si powders, and the co-existence of liquid media (2:1 or 1:2) may be beneficial for shortening the setting time, enhancing early-stage compressive strength, and significantly improving the anti-microleakage ability of cement. Moreover, the composite cements also exhibited appreciable antibacterial efficacy in vitro. These findings demonstrated that the physicochemical properties of the Ca-silicate powders could be tuned by adding a minor amount of inorganic silicate nanofibers and a simple ball milling condition, and such a facile strategy is favorable for developing novel (pre-mixed) Ca silicate-based cements as root canal sealers.

Acid neutralizing and remineralizing orthodontic adhesive containing hydrated calcium silicate

OBJECTIVES

The objective of this study was to evaluate an orthodontic adhesive containing hydrated calcium silicate (hCS) in terms of its bond strength with the enamel surface and its acid-neutralization and apatite-forming abilities.

METHODS

The experimental orthodontic adhesives were composed of 30 wt.% resin matrix and 70 wt.% filler, which itself was a mixture of silanized glass filler and hCS in weight ratios of 100% glass filler (hCS 0), 17.5% hCS (hCS 17.5), 35% hCS (hCS 35.0), and 52.5% hCS (hCS 52.5). The degree of conversion (DC) and shear bond strength (SBS) of bovine enamel surfaces were tested. pH measurements were performed immediately upon submersion of the specimens in a lactic acid solution. The surface precipitates that formed on specimens immersed in phosphate-buffered saline (PBS) were analyzed by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) and Raman spectroscopy after 15, 30, and 90 days.

RESULTS

The experimental groups exhibited no significant differences in DC and had clinically acceptable SBS values. The hCS-containing groups showed increasing pH values as more hCS was added. hCS 52.5 produced Ca- and P-containing surface precipitates after PBS immersion, and hydroxyapatite deposition was detected after 15, 30, and 90 days.

CONCLUSIONS

These results suggest that orthodontic adhesives containing hCS are effective for acid neutralization. Furthermore, hCS has an apatite-forming ability for enamel remineralization.

CLINICAL SIGNIFICANCE

The novel orthodontic adhesive containing hCS exhibits a potential clinical benefit against demineralization and enhanced remineralization of the enamel surface around or beneath the orthodontic brackets.

The in vivo dissolution of tricalcium silicate bone cement

This study aimed to investigate the in vivo dissolution of tricalcium silicate (Ca₃ SiO₅ , C₃ S) bone cement in the rabbit femoral defect. Results indicated that C₃ S paste directly integrated with the bone tissue without the protection of the bone-like apatite. Calcium silicate hydrate gel (C-S-H gel) and Ca(OH)₂ were the main components of C₃ S paste. The dissolution model of C₃ S paste was a mass loss rather than a decrease in volume. The initial dissolution of C₃ S paste (0 ~ 6 weeks) was greatly attributed to the release of Ca(OH)₂ , and the later dissolution (>6 weeks) was attributed to the decalcification of C-S-H gel. Although the mass of C₃ S paste could decrease by more than 19 wt % after 6 weeks of implantation, the created pores (<1 μm) were not large enough for the bone tissue to migrate into C₃ S paste. The loss of Ca ions also resulted in the transformation of SiO₄ tetrahedrons from Q¹ and Q² to Q⁰ , Q³ , and Q⁴ in C-S-H gel. Because only isolated SiO₄ tetrahedrons (Q⁰ ) and Ca ions could be absorbed by the bone tissue, C₃ S paste gradually transformed into a silica-rich gel. The fundamental reason for no decrease in volume of C₃ S paste was that the SiO₄ tetrahedron network still maintained the frame structure of C₃ S paste during the implantation.

Piezoelectric hybrid scaffolds mineralized with calcium carbonate for tissue engineering: Analysis of local enzyme and small-molecule drug delivery, cell response and antibacterial performance

As the next generation of materials for bone reconstruction, we propose a multifunctional bioactive platform based on biodegradable piezoelectric polyhydroxybutyrate (PHB) fibrous scaffolds for tissue engineering with drug delivery capabilities. To use the entire surface area for local drug delivery, the scaffold surface was uniformly biomineralized with biocompatible calcium carbonate (CaCO₃) microparticles in a vaterite-calcite polymorph mixture. CaCO₃-coated PHB scaffolds demonstrated a similar elastic modulus compared to that of pristine one. However, reduced tensile strength and failure strain of 31% and 67% were observed, respectively. The biomimetic immobilization of enzyme alkaline phosphatase (ALP) and glycopeptide antibiotic vancomycin (VCM) preserved the CaCO₃-mineralized PHB scaffold morphology and resulted in partial recrystallization of vaterite to calcite. In comparison to pristine scaffolds, the loading efficiency of CaCO₃-mineralized PHB scaffolds was 4.6 and 3.5 times higher for VCM and ALP, respectively. Despite the increased number of cells incubated with ALP-immobilized scaffolds (up to 61% for non-mineralized and up to 36% for mineralized), the CaCO₃-mineralized PHB scaffolds showed cell adhesion; those containing both VCM and ALP molecules had the highest cell density. Importantly, no toxicity for pre-osteoblastic cells was detected, even in the VCM-immobilized scaffolds. In contrast with antibiotic-free scaffolds, the VCM-immobilized ones had a pronounced antibacterial effect against gram-positive bacteria Staphylococcus aureus. Thus, piezoelectric hybrid PHB scaffolds modified with CaCO₃ layers and immobilized VCM/ALP are promising materials in bone tissue engineering.

Physico-mechanical characteristics of tri-calcium silicate pastes as dentin substitute and interface analysis in class II cavities: effect of CaCl2 and SBF solutions

The influence of using simulated body fluid (SBF) as a curing medium on some characteristics of pure single tri-calcium silicate (C₃S) bio-cement was investigated. CaCl₂ salt solution was used as an accelerating liquid for setting and hardening of C₃S pastes in comparison with distilled water (DW). Solid state reaction was applied to synthesis C₃S phase at elevated temperature followed by rapid cooling. The results showed that 10 wt.% CaCl₂ solution was the optimum concentration that showed the lowest setting time (106 min). C₃S pastes prepared with CaCl₂ solution have better physical and mechanical properties than those mixed with DW even after curing under SBF solution for the different curing ages. However, SBF solution has an adverse effect on the hydrated compound C-S-H that results in a little decrease in strength and hardness values. The elemental analysis emphasized the presence of apatite layer on the surface of the hardened C₃S paste. Scanning electron microscopy (SEM) photomicrographs and elemental analysis revealed reliable adaptation of the experimentally prepared C₃S paste to the tooth structure, in addition to its bioactivity makes it a consistent material to be used as dentin substitute.

Calcium silicate-based cements and functional impacts of various constituents

Calcium silicate-based cements have superior sealing ability, bioactivity, and marginal adaptation, which make them suitable for different dental treatment applications. However, they exhibit some drawbacks such as long setting time and poor handling characteristics. To overcome these limitations calcium silicates are engineered with various constituents to improve specific characteristics of the base material, and are the focus of this review. An electronic search of the PubMed, MEDLINE, and EMBASE via OVID databases using appropriate terms and keywords related to the use, application, and properties of calcium silicate-based cements was conducted. Two independent reviewers obtained and analyzed the full texts of the selected articles. Although the effects of various constituents and additives to the base Portland cement-like materials have been investigated, there is no one particular ingredient that stands out as being most important. Applying nanotechnology and new synthesis methods for powders most positively affected the cement properties.

Novel tricalcium silicate/magnesium phosphate composite bone cement having high compressive strength, in vitro bioactivity and cytocompatibility

Although inorganic bone cements such as calcium phosphate cements have been widely applied in orthopaedic and dental fields because of their self-setting ability, development of high-strength bone cement with bioactivity and biodegradability remains a major challenge. Therefore, the purpose of this study is to prepare a tricalcium silicate/magnesium phosphate (C3S/MPC) composite bone cement, which is intended to combine the excellent bioactivity of C3S with remarkable self-setting properties and mechanical strength of MPC. The self-setting and mechanical properties, in vitro induction of apatite formation and degradation behaviour, and cytocompatibility of the composite cements were investigated. Our results showed that the C3S/MPC composite cement with an optimal composition had compressive strength up to 87 MPa, which was significantly higher than C3S (25 MPa) and MPC (64 MPa). The setting time could be adjusted between 3 min and 29 min with the variation of compositions. The hydraulic reaction products of the C3S/MPC composite cement were composed of calcium silicate hydrate (CSH) derived from the hydration of C3S and gel-like amorphous substance. The C3S/MPC composite cements could induce apatite mineralization on its surface in SBF solution and degraded gradually in Tris-HCl solution. Besides, the composite cements showed good cytocompatibility and stimulatory effect on the proliferation of MC3T3-E1 osteoblast cells. Our results indicated that the C3S/MPC composite bone cement might be a new promising high-strength inorganic bioactive material which may hold the potential for bone repair in load-bearing site.

The effects of a SiO2 coating on the corrosion parameters cpTi and Ti-6Al-7Nb alloy

The aim of this paper was to evaluate the usefulness of the sol-gel method application, to modificate the surface of the Ti6Al7Nb alloy and the cpTi titanium (Grade 4) with SiO₂ oxide, applied on the vascular implants to improve their hemocompatibility. Mechanical treatment was followed by film deposition on surface of the titanium samples. An appropriate selection of the process parameters was verified in the studies of corrosion, using potentiodynamic and impedance method. A test was conducted in the solution simulating blood vessels environment, in simulated body fluid at t = 37.0 ± 1 °C and pH = 7.0 ± 0.2. Results showed varied electrochemical properties of the SiO₂ film, depending on its deposition parameters. Correlations between corrosion resistance and layer adhesion to the substrate were observed, depending on annealing temperature.

Cytotoxicity and physical properties of tricalcium silicate-based endodontic materials

Objectives

The aim of this study was to evaluate the cytotoxicity, setting time and compressive strength of MTA and two novel tricalcium silicate-based endodontic materials, Bioaggregate (BA) and Biodentine (BD).

Materials and Methods

Cytotoxicity was evaluated by using a 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-((phenylamino)carbonyl)-2H-tetrazolium hydroxide (XTT) assay. Measurements of 9 heavy metals (arsenic, cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc) were performed by inductively coupled plasma-mass spectrometry (ICP-MS) of leachates obtained by soaking the materials in distilled water. Setting time and compressive strength tests were performed following ISO requirements.

Results

BA had comparable cell viability to MTA, whereas the cell viability of BD was significantly lower than that of MTA. The ICP-MS analysis revealed that BD released significantly higher amount of 5 heavy metals (arsenic, copper, iron, manganese, and zinc) than MTA and BA. The setting time of BD was significantly shorter than that of MTA and BA, and the compressive strength of BA was significantly lower than that of MTA and BD.

Conclusions

BA and BD were biocompatible, and they did not show any cytotoxic effects on human periodontal ligament fibroblasts. BA showed comparable cytotoxicity to MTA but inferior physical properties. BD had somewhat higher cytotoxicity but superior physical properties than MTA.

The effect of curing conditions on the physical properties of tricalcium silicate cement for use as a dental biomaterial

AIM

To investigate the physical properties of tricalcium silicate (TCS) with and without the addition of a radiopacifier and compare them with that of Portland cement (PC) and radiopaque PC in an mineral trioxide aggregate-like system.

METHODOLOGY

Tricalcium silicate, PC and radiopacified variants containing 20% bismuth oxide were tested for radiopacity, compressive strength, setting time and dimensional stability. All the testing was performed at 37 °C and under different environmental conditions namely at 100% humidity or immersed in either water or Hank's balanced salt solution (HBSS). Testing was performed after both 1 and 28 days.

RESULTS

The cements exhibited radiopacity values equivalent to <3 mm. Addition of 20% bismuth oxide resulted in adequate radiopacity. The strength of TCS was independent of the curing conditions. The cements without radiopacifier had improved strength characteristics when immersed in HBSS, whilst the radiopacified cements exhibited higher strengths when soaked in water. Tricalcium silicate demonstrated the shortest setting time. Addition of bismuth oxide increased the setting time of the cements while HBSS inhibited the setting of bismuth oxide-replaced cements. The PC-based materials exhibited a net contraction higher than that recorded for TCS-based cements in all curing conditions. The dimensional change exhibited by the specimens was generally greater in the first few hours of setting, but then stabilized with time.

CONCLUSIONS

Tricalcium silicate cement required the addition of a radiopacifying agent to make it suitable for use as a dental material. Tricalcium silicate exhibited adequate physical properties and thus was shown to be a suitable replacement for the PC component in MTA. Bismuth oxide drastically increased the setting time of the test cements in phosphate-containing solutions. Alternative radiopacifiers that do not retard the setting time need to be investigated.

Fabrication and characterization of novel hybrid organic/inorganic microparticles to apply in bone regeneration

The aim of this study was to fabricate and characterize the novel hybrid organic/inorganic microparticles (MPs) to apply in bone regeneration. These hybrid MPs were fabricated using a scale-up method we have developed to increase the yield of chitosan (CS) MPs. The MPs were based on the CS and consist of inorganic components such as dibasic calcium phosphate (CaHPO(4)) or calcium carbonate (CaCO(3)). Tripolyphosphate (TPP) has been used as a cross-linking agent to form cross-links between the amine groups in CS and phosphate groups in TPP. Four types of hybrid MPs were fabricated: CS; CS-10%CaHPO(4); CS-20%CaHPO(4); CS-10% CaCO(3). SEM images revealed that all types of MPs were approximately spherical in shape and most of them were with a diameter range of 30-60 microm. XRD reveals the evidence of having CaHPO(4) or CaCO(3) in the CS-10%CaHPO(4), CS-20%CaHPO(4), or CS-10%CaCO(3) MPs, respectively. All types of MPs have shown the existence of cross-links according to FTIR. We have studied the mesenchymal stem cell (MSC) attachment on the surfaces of all types of MPs compared to control wells at 4, 8, 25, and 48 h. The attached MSCs on all types of MPs were increased more than two-fold at 48 h compared with that of 4 h. These hybrid MPs have a great potential to apply as a bone-void filler or bone tissue engineering scaffold to treat the bone defects.

Anti-washout carboxymethyl chitosan modified tricalcium silicate bone cement: preparation, mechanical properties and in vitro bioactivity

Anti-washout CaF(2) stabilized C(3)S (F-C(3)S) bone cement was prepared by adding water-soluble carboxymethyl chitosan (CMCS) to the hydration liquid. The setting time, compressive strength and in vitro bioactivity of the CMCS modified F-C(3)S (CMCS-C(3)S) pastes were evaluated. The results indicate that CMCS-C(3)S pastes could be stable in the shaking simulated body fluid (SBF) after immediately mixed. The addition of CMCS significantly enhances the cohesion of particles, at the same time restrains the penetration of liquid, and thus endows the anti-washout ability. The setting times of the pastes increase with the increase of CMCS concentrations in the hydration liquid. Besides, the compressive strengths of CMCS-C(3)S pastes after setting for 1-28 days are lower than that of the pure F-C(3)S paste, but the sufficient strengths would be suitable for the clinical applications. The crystalline apatite deposited on the paste surface is retarded from 1 to 2 days for the addition of CMCS, but the quantities of deposited apatite are same after soaking in SBF for 3 days. As the result that pure C(3)S paste has shorter setting times than pure F-C(3)S paste, CMCS modified pure C(3)S pastes would have better anti-washout ability. Our study provides a convenient way to use C(3)S bone cement with excellent anti-washout ability when the pastes are exposed to biological fluids. The novel anti-washout CMCS-C(3)S bone cement with suitable setting times, sufficient strengths and in vitro bioactivity would have good prospects for medical application.