CD41 Western blotting: a new method to detect platelet adhesion to artificial surfaces used in extracorporeal circulation procedures

Human Blood Platelets Adsorption on Polymeric Materials for Liquid Biopsy

Platelets are emerging as a promising source of blood biomarkers for several pathologies, including cancer. New automated techniques for easier manipulation of platelets in the context of lab-on-a-chips could be of great support for liquid biopsy. Here, several polymeric materials were investigated for their behavior in terms of adhesion and activation of human platelets. Polymeric materials were selected among the most used in microfabrication (PDMS, PMMA and COC) and commercial and home-made resins for 3D printing technology with the aim to identify the most suitable for the realization of microdevices for human platelets isolation and analysis. To visualize adherent platelets and their activation state scanning, electron microscopy was used, while confocal microscopy was used for evaluating platelets’ features. In addition, atomic force microscopy was employed to further study platelets adherent to the polymeric materials. Polymers were divided in two main groups: the most prone to platelet adhesion and materials that cause few or no platelets to adhere. Therefore, different polymeric materials could be identified as suitable for the realization of microdevices aimed at capturing human platelets, while other materials could be employed for the fabrication of microdevices or parts of microdevices for the processing of platelets, without loss on surfaces during the process.

In vitro investigation of chemical properties and biocompatibility of neurovascular braided implants

Braiding of Nitinol micro wires is an established technology for the manufacturing of fine-meshed neurovascular implants for tortuous vessel geometries. Electropolishing of wires before the braiding process has the potential to improve the in vitro behaviour in terms of thrombogenicity and endothelial cell proliferation. In this study, we present the first in vitro investigation of braided electropolished/blue oxide Nitinol samples in a blood flow loop, showing a significantly lower activation of the coagulation pathway (represented by the TAT III marker) and a tendency towards reduced platelet adhesion. Furthermore, we applied the same surface treatment on flat disks and measured protein adhesion as well as endothelial cell proliferation. We compared our results to non-electropolished samples with a native oxide surface. While platelet deposition was reduced on electropolished/blue oxide surface, a significant increase of endothelial cell seeding was observed. Investigation of inflammatory marker expression in endothelial cells provided divergent results depending on the marker tested, demanding closer investigation. Surface analysis using Auger electron spectroscopy revealed a thin layer mainly consisting of titanium oxynitride or titanium oxide + titanium nitride as a potential cause of the improved biological performance. Translated to the clinical field of intracranial aneurysm treatment, the improved biocompatibility has the potential to increase both safety (low thrombogenicity) and effectiveness (aneurysm neck reconstruction).

Predicting Transfusion Requirements During Extracorporeal Membrane Oxygenation

OBJECTIVE

Patients requiring extracorporeal membrane oxygenation (ECMO) have a well-known bleeding risk and the potential for experiencing possibly fatal thromboembolic complications. Risk factors and predictors of transfusion requirements during ECMO support remain uncertain. The authors hypothesized that compromised organ function immediately before ECMO support will influence transfusion requirements.

DESIGN

A prospective observational study.

SETTING

A tertiary, single-institutional university hospital.

PARTICIPANTS

The study included 40 adult patients requiring ECMO for intractable cardiac and respiratory failure between July 2010 and December 2012. Blood samples were taken before initiation of ECMO (baseline), after 24 and 48 hours on ECMO, and 24 hours after termination of ECMO.

INTERVENTIONS

None.

MEASUREMENTS AND MAIN RESULTS

Independent of veno-arterial or veno-venous support, 26% of patients required≥2 packed red blood cells per day (PRBC/d) and 74% of patients required<2 PRBC/d during ECMO. Requirements of≥2 PRBC/d during ECMO support were associated with higher creatinine levels and lower prothrombin times (PT, %) at baseline and with impaired platelet function after 24 hours on ECMO. Platelet function, activated by thrombin receptor-activating peptide stimulation, decreased by 30% to 40% over time on ECMO. Receiver operating characteristic curve analysis showed cut-off values for creatinine of 1.49 mg/dL (sensitivity 70%, specificity 70%; area under the curve [AUC] 0.76, 95% confidence interval [CI] 0.58-0.94), for PT of 48% (sensitivity 80%, specificity 59%; AUC 0.69, 95% CI 0.50-0.87), and for thrombin receptor-activating peptide (TRAP) 32 U (sensitivity 90%, specificity 68%; AUC 0.76, 95% CI 0.59-0.93).

CONCLUSIONS

The results of this study demonstrated that increased creatinine levels and lower PT before ECMO and secondary impaired platelet function significantly increased transfusion requirement.

Free hemoglobin increases von Willebrand factor-mediated platelet adhesion in vitro: implications for circulatory devices

Intravascular hemolysis occurs in patients on extracorporeal membrane oxygenation. High levels of free acellular adult hemoglobin (free HbA) are associated with clotting in this mechanical device that can result in thrombotic complications. Adsorption of fibrinogen onto the surface of biomaterial correlates with platelet adhesion, which is mediated by von Willebrand factor (VWF). Because free Hb interacts with VWF, we studied the effect of hemoglobin (Hb) on platelet adhesion to fibrin(ogen) under conditions of different hydrodynamic forces. This effect was investigated using purified human HbA and fibrinogen, extracellular matrix, collagen, or purified plasma VWF as surface-coated substrates to examine flow-dependent platelet adhesion. Antibodies and VWF-deficient plasma were also used. Free Hb (≥50 mg/dL) effectively augmented platelet adhesion, and microthrombi formation on fibrin(ogen), extracellular matrix, and collagen at high shear stress. The effect of free Hb was effectively blocked by anti-glycoprotein Ibα (GPIbα) antibodies or depletion of VWF. Unexpectedly, free Hb also promoted firm platelet adhesion and stable microthrombi on VWF. Lastly, we determined that Hb interacts directly with the A1 domain. This study is the first to demonstrate that extracellular Hb directly affects the GPIbα-VWF interaction in thrombosis, and describes another mechanism by which hemolysis is connected to thrombotic events.

NCO-sP(EO-stat-PO) coatings on gold sensors--a QCM study of hemocompatibility

The reliability of implantable blood sensors is often hampered by unspecific adsorption of plasma proteins and blood cells. This not only leads to a loss of sensor signal over time, but can also result in undesired host vs. graft reactions. Within this study we evaluated the hemocompatibility of isocyanate conjugated star shaped polytheylene oxide-polypropylene oxide co-polymers NCO-sP(EO-stat-PO) when applied to gold surfaces as an auspicious coating material for gold sputtered blood contacting sensors. Quartz crystal microbalance (QCM) sensors were coated with ultrathin NCO-sP(EO-stat-PO) films and compared with uncoated gold sensors. Protein resistance was assessed by QCM measurements with fibrinogen solution and platelet poor plasma (PPP), followed by quantification of fibrinogen adsorption. Hemocompatibility was tested by incubation with human platelet rich plasma (PRP). Thrombin antithrombin-III complex (TAT), β-thromboglobulin (β-TG) and platelet factor 4 (PF4) were used as coagulation activation markers. Furthermore, scanning electron microscopy (SEM) was used to visualize platelet adhesion to the sensor surfaces. Compared to uncoated gold sensors, NCO-sP(EO-stat-PO) coated sensors revealed significant better resistance against protein adsorption, lower TAT generation and a lower amount of adherent platelets. Moreover, coating with ultrathin NCO-sP(EO-stat-PO) films creates a cell resistant hemocompatible surface on gold that increases the chance of prolonged sensor functionality and can easily be modified with specific receptor molecules.