Physicochemical properties and cytotoxicities of Sr-containing biphasic calcium phosphate bone scaffolds

Influence of Ag and/or Sr Dopants on the Mechanical Properties and In Vitro Degradation of β-Tricalcium Phosphate-Based Ceramics

β-tricalcium phosphate has good biodegradability and biocompatibility; it is widely perceived as a good material for treating bone deficiency. In this research, different contents of strontium (Sr) and silver (Ag) ion-doped β-tricalcium phosphate powders were prepared using the sol-gel method. After obtaining the best ratio of pore-forming agent and binder, the as-synthesized powders were sintered in a muffle for 5 h at 1000 °C to obtain the samples. Then, these samples were degraded in vitro in simulated body fluids. The samples were tested using a series of characterization methods before and after degradation. Results showed that the amount of Sr and/or Ag doping had an effect on the crystallinity and structural parameters of the samples. After degradation, though the compressive strength of these samples decreased overall, the compressive strength of the undoped samples was higher than that of the doped samples. Notably, apatite-like materials were observed on the surface of the samples. All the results indicate that Sr and/or Ag β-TCP has good osteogenesis and proper mechanical properties; it will be applied as a prospective biomaterial in the area of bone repair.

Development of Sr-incorporated biphasic calcium phosphate bone cement

To follow the design strategy of traditional biphasic calcium phosphate (BCP) ceramic, in the present study, strontium-doped biphasic calcium phosphate bone cement (Sr-BCPC) composites comprising Sr-β-tricalcium phosphate (TCP)/Sr-hydroxyapatite (HAP) had been prepared for the first time using Sr _x -β-TCP/tetracalcium phosphate (TTCP) as a cement powder and diluted phosphoric acid as a cement liquid. The phase composition, setting time, compressive strength, washout resistance, in vitro degradation rate, microstructure evolutions, hydration dynamics and cytotoxicity of Sr-BCPC at various Sr contents were intensively investigated. It was found that the final cement product was composed of entangled Sr-HAP nano-needles and cobblestone-like Sr-β-TCP sub-micron particles, and the weight percentages in the final cement product after hydration in simulated body fluid for 24 h were in the ranges of 60 wt%-70 wt% Sr-HAP and 30 wt%-40 wt% Sr-β-TCP, respectively. Sr and the concentration of Sr exhibit significant effects on the phase compositions, compressive strength, setting time, in vitro degradation rate and cytotoxicity of the biphasic bone cement. In particular, the degradation rate increased considerably with the increase of the Sr-β-TCP phase. It is anticipated that the introduction of the 'biphasic' design into calcium phosphate bone cements is an effective strategy to improve their degradation properties.

Biphasic calcium phosphates bioceramics (HA/TCP): Concept, physicochemical properties and the impact of standardization of study protocols in biomaterials research

Biphasic calcium phosphates (BCP) bioceramics have become the materials of choice in various orthopedic and maxillofacial bone repair procedures. One of their main advantages is their biodegradation rate that can be modified by changing the proportional ratio of the composition phases. For enhanced bone tissue regeneration, the bioactivity of BCP should be increased by optimizing their physicochemical properties. To date, the ideal physicochemical properties of BCP for bone applications have not been defined. This is mostly related to lack of standard study protocols in biomaterial science especially with regards to their characterizations and clinical applications. In this paper we provided a review on BCP and their physicochemical properties relevant to clinical applications. In addition, we summarized the available literature on their use in animal models and evaluated the influences of different composition ratios on bone healing. Controversies in literature with regards to ideal composition ratio of BCP have also been discussed in detail. We illustrated the discrepancies in study protocols among researchers in animal studies and emphasized the need to develop and follow a set of generally accepted standardized guidelines. Finally; we provided general recommendations for future pre-clinical studies that allow better standardization of study protocols. This will allow better comparison and contrast of newly developed bone substitute biomaterials that help further progress in the field of biomaterial science.

Injectable biphasic calcium phosphate cements as a potential bone substitute

Apatitic calcium phosphate cements (CPCs) have been widely used as bone grafts due to their excellent osteoconductive properties, but the degradation properties are insufficient to stimulate bone healing in large bone defects. A novel approach to overcome the lack of degradability of apatitic CPC involves the development of biphasic CPCs (BCPC) based on tricalcium phosphate (TCP) in both α- and β-polymorphs. The aim of the current study was to prepare and analyze the physicochemical properties of BCPCs based on dual phase α/β-TCP as obtained by heat treatment of pure α-TCP. The handling and mechanical characteristics of the samples as well as the degradation behavior under in vitro condition were investigated and compared with a standard monophasic α-TCP-based CPC. The results showed that different heat treatments of commercially available α-TCP allowed the formation of biphasic calcium phosphate powder with a variety of α/β-TCP ratios. The use of biphasic powder particles as a reactant for CPCs resulted into increased setting and injectability times of the final BCPCs. During hardening of the cements, the amount of apatite formation decreased with increasing β-TCP content in the biphasic precursor powders. The morphology of the monophasic CPC consisted of plate-like crystals, whereas needle-like crystals were observed for BCPCs. In vitro degradation tests demonstrated that dissolution rate and corresponding calcium release from the set cements increased considerably with increasing β-TCP content, suggesting that apatitic CPCs can be rendered degradable by using biphasic α/β-TCP as powder precursor phase.

Biphasic, triphasic and multiphasic calcium orthophosphates

Biphasic, triphasic and multiphasic (polyphasic) calcium orthophosphates have been sought as biomaterials for reconstruction of bone defects in maxillofacial, dental and orthopedic applications. In general, this concept is determined by advantageous balances of more stable (frequently hydroxyapatite) and more resorbable (typically tricalcium orthophosphates) phases of calcium orthophosphates, while the optimum ratios depend on the particular applications. Therefore, all currently known biphasic, triphasic and multiphasic formulations of calcium orthophosphate bioceramics are sparingly soluble in water and, thus, after being implanted they are gradually resorbed inside the body, releasing calcium and orthophosphate ions into the biological medium and, hence, seeding new bone formation. The available formulations have already demonstrated proven biocompatibility, osteoconductivity, safety and predictability in vitro, in vivo, as well as in clinical models. More recently, in vitro and in vivo studies have shown that some of them might possess osteoinductive properties. Hence, in the field of tissue engineering biphasic, triphasic and multiphasic calcium orthophosphates represent promising biomaterials to construct various scaffolds capable of carrying and/or modulating the behavior of cells. Furthermore, such scaffolds are also suitable for drug delivery applications. This review summarizes the available information on biphasic, triphasic and multiphasic calcium orthophosphates, including their biomedical applications. New formulations are also proposed.