Effect of surface modification by nitrogen ion implantation on the electrochemical and cellular behaviors of super-elastic NiTi shape memory alloy

Influence of Low Temperature Plasma Oxidizing on the Bioactivity of NiTi Shape Memory Alloy for Medical Applications

The present study elucidates the impact of glow discharge oxidation within a low-temperature plasma environment on the bioactivity characteristics of an NiTi shape memory alloy. The properties of the produced surface layers, such as structure (TEM observations), surface morphology (SEM observations), chemical and phase composition (EDS and XRD measurements), wettability (optical gonimeter), and the biological response of osteoblasts and platelets to the oxidized surface compared with the NiTi alloy without a surface layer are presented. The presented surface modification of the NiTi shape memory alloy, achieved through oxidizing in a low-temperature plasma environment, led to the creation of a continuous surface layer composed of nanocrystalline titanium oxide TiO2 (rutile). The findings obtained from this study provide evidence that the oxidized layer augments the bioactivity of the shape memory alloy. This augmentation was substantiated through the spontaneous biomimetic deposition of apatite from a simulated body fluid (SBF) solution. Furthermore, the modified surface exhibited improved osteoblast proliferation, and enhanced platelet adhesion and activation. This proposed surface modification strategy holds promise as a prospective solution to enhance the biocompatibility and bioactivity of NiTi shape memory alloy intended for prolonged use in bone implant applications.

Lactate released from human fibroblasts enhances Ni elution from Ni plate

Elution of Ni ions from medical devices induces inflammation and toxicity. We previously reported that elution of Ni ions from Ni wires induced COX-2 expression and increased lactate production, but whether lactate is involved in the further elution of Ni ions remains unclear. In this study, using KMST-6, a human fibroblast cell line, we examined the molecular mechanisms by which Ni ions increase lactate release and the role of lactate in enhancing the elution of Ni ions. When KMST-6 cells were incubated on a Ni plate or stimulated with NiCl₂ (1 mM), the expression of glucose transporter 1 (GLUT1), hexokinase 2 (HK2), and lactate dehydrogenase A (LDHA), and the release of lactate were enhanced. The NiCl₂ (1 mM)-induced expression of these genes was inhibited by a hypoxia-inducible factor-1α (HIF-1α) inhibitor, PX-478 (10-25 μM). Stimulation of cells with a prolyl hydroxylase domain (PHD) inhibitor, roxadustat, increased the expression of these genes, lactate release, and elution of Ni ions at 10 μM. A monocarboxylate transporter-4 (MCT4) inhibitor, syrosingopine, inhibited lactate release from roxadustat-treated cells and reduced the elution of Ni ions by the cells at 10 μM. Finally, syrosingopine (10 μM) reduced the elution of Ni ions by the cells from the Ni plate. These results suggest that elution of Ni ions from metals promotes the production of lactate via HIF-1α-mediated gene expression and causes further Ni elution. Thus, Ni ions show a positive feedback mechanism of Ni elution, and this step may be potentially targeted to protect against metal elution from metal devices.

Multi-scale characterization and biological evaluation of composite surface layers produced under glow discharge conditions on NiTi shape memory alloy for potential cardiological application

NiTi shape memory alloys are characterized by relatively good biocompatibility primarily thanks to their ability to self-passivate. However, before they can be used as medical implants for long term use, they need to undergo treatment aimed at producing layers on their surface that are superior to spontaneously formed oxide layers and that would increase their resistance to corrosion, limit nickel ion release from the surface (metallosis) and have the capability to shape their biological properties depending on the application. Furthermore, cardiac implants require addressing the issue of blood clotting on the surface. Treatment in glow-discharge low temperature plasma makes it possible to produce titanium layers with a structure and properties that are controlled via process parameters. In addition, antithrombogenic properties can be improved by depositing a carbon coating via the RFCVD process. The aim of the study was to investigate the structure, surface topography, adhesive properties, wettability, surface free energy and evaluate metallosis after producing TiO₂ and a-C:N:H + TiO₂ composite layers on NiTi alloy. The capabilities of AFM microscopes in studying the adhesive properties of a surface were also highlighted in the study. The study shows that the produced surface layers are capable of significantly reducing metallosis. Furthermore, in contrast to NiTi in its initial state, layers of nanocrystalline TiO₂ titanium oxide (rutile) with a homogeneous structure demonstrate greater adhesion strength and more developed surface in the microscale, which facilitates the formation of an a-C:N:H coating. Therefore the formation of a coating of a-C:N:H amorphous carbon on NiTi alloy that has previously been oxidised in low-temperature plasma may prove to be a favourable solution in terms of using NiTi alloy to produce cardiac implants.

Structure and properties of composite surface layers produced on NiTi shape memory alloy by a hybrid method

A hybrid process that combines oxidation under glow-discharge conditions with ion beam-assisted deposition (IBAD) has been applied to mechanically polished NiTi shape memory alloy in order to produce composite surface layers consisting of a TiO₂ layer and an external carbon coating with an addition of silver. The produced surface layers a-C(Ag) + TiO₂ type have shown increased surface roughness, improved corrosion resistance, altered wettability, and surface free energy, as well as reduced platelet adhesion, aggregation, and activation in comparison to NiTi alloy in initial state. Such characteristics can be of great benefit for cardiac applications.

Hybrid a-CNH+TiO2+TiN-type surface layers produced on NiTi shape memory alloy for cardiovascular applications

AIM

The goal was to improve the properties of NiTi shape memory alloy to make it suitable for cardiac applications. For this purpose, a hybrid a-CNH+TiO₂+TiN-type surface layer was produced on NiTi alloy and characterized.

MATERIALS & METHODS

The NiTi alloy subjected to hybrid process combining low-temperature oxynitriding under glow discharge conditions and radio frequency chemical vapor deposition process was examined for microstructure, surface topography, corrosion resistance, wettability and surface-free energy, Ni ion release and platelets adhesion, aggregation and activation.

RESULTS

The hybrid surface layers showed slightly increased surface roughness, better corrosion resistance, a more hydrophobic nature, decreased surface free energy, smaller release of nickel ions and reduced platelets activation.

CONCLUSION

The produced layers could expand the range of NiTi medical applications.

Metallic Biomaterials: Current Challenges and Opportunities

Metallic biomaterials are engineered systems designed to provide internal support to biological tissues and they are being used largely in joint replacements, dental implants, orthopaedic fixations and stents. Higher biomaterial usage is associated with an increased incidence of implant-related complications due to poor implant integration, inflammation, mechanical instability, necrosis and infections, and associated prolonged patient care, pain and loss of function. In this review, we will briefly explore major representatives of metallic biomaterials along with the key existing and emerging strategies for surface and bulk modification used to improve biointegration, mechanical strength and flexibility of biometals, and discuss their compatibility with the concept of 3D printing.

Biocompatibility and Inflammatory Potential of Titanium Alloys Cultivated with Human Osteoblasts, Fibroblasts and Macrophages

The biomaterials used to maintain or replace functions in the human body consist mainly of metals, ceramics or polymers. In orthopedic surgery, metallic materials, especially titanium and its alloys, are the most common, due to their excellent mechanical properties, corrosion resistance, and biocompatibility. Aside from the established Ti6Al4V alloy, shape memory materials such as nickel-titanium (NiTi) have risen in importance, but are also discussed because of the adverse effects of nickel ions. These might be reduced by specific surface modifications. In the present in vitro study, the osteoblastic cell line MG-63 as well as primary human osteoblasts, fibroblasts, and macrophages were cultured on titanium alloys (forged Ti6Al4V, additive manufactured Ti6Al4V, NiTi, and Diamond-Like-Carbon (DLC)-coated NiTi) to verify their specific biocompatibility and inflammatory potential. Additive manufactured Ti6Al4V and NiTi revealed the highest levels of metabolic cell activity. DLC-coated NiTi appeared as a suitable surface for cell growth, showing the highest collagen production. None of the implant materials caused a strong inflammatory response. In general, no distinct cell-specific response could be observed for the materials and surface coating used. In summary, all tested titanium alloys seem to be biologically appropriate for application in orthopedic surgery.

Effect of Tricalcium Magnesium Silicate Coating on the Electrochemical and Biological Behavior of Ti-6Al-4V Alloys

In the current study, a sol-gel-synthesized tricalcium magnesium silicate powder was coated on Ti-6Al-4V alloys using plasma spray method. Composition of feed powder was evaluated by X-ray diffraction technique before and after the coating process. Scanning electron microscopy and atomic force microscopy were used to study the morphology of coated substrates. The corrosion behaviors of bare and coated Ti-6Al-4V alloys were examined using potentiodynamic polarization test and electrochemical impedance spectroscopy in stimulated body fluids. Moreover, bare and coated Ti-6Al-4V alloys were characterized in vitro by culturing osteoblast and mesenchymal stem cells for several days. Results demonstrated a meaningful improvement in the corrosion resistance of Ti-6Al-4V alloys coated with tricalcium magnesium silicate compared with the bare counterparts, by showing a decrease in corrosion current density from 1.84 μA/cm² to 0.31 μA/cm². Furthermore, the coating substantially improved the bioactivity of Ti-6Al-4Valloys. Our study on corrosion behavior and biological response of Ti-6Al-4V alloy coated by tricalcium magnesium silicate proved that the coating has considerably enhanced safety and applicability of Ti-6Al-4V alloys, suggesting its potential use in permanent implants and artificial joints.

Reduction of bacterial adhesion on dental composite resins by silicon-oxygen thin film coatings

Adhesion of bacteria on dental materials can be reduced by modifying the physical and chemical characteristics of their surfaces, either through the application of specific surface treatments or by the deposition of thin film coatings. Since this approach does not rely on the use of drugs or antimicrobial agents embedded in the materials, its duration is not limited by their possible depletion. Moreover it avoids the risks related to possible cytotoxic effects elicited by antibacterial substances released from the surface and diffused in the surrounding tissues. In this work, the adhesion of Streptococcus mutans and Streptococcus mitis was studied on four composite resins, commonly used for manufacturing dental prostheses. The surfaces of dental materials were modified through the deposition of a-SiO(x) thin films by plasma enhanced chemical vapor deposition. The chemical bonding structure of the coatings was analyzed by Fourier-transform infrared spectroscopy. The morphology of the dental materials before and after the coating deposition was assessed by means of optical microscopy and high-resolution mechanical profilometry, while their wettability was investigated by contact angle measurements. The sample roughness was not altered after coating deposition, while a noticeable increase of wettability was detected for all the samples. Also, the adhesion of S. mitis decreased in a statistically significant way on the coated samples, when compared to the uncoated ones, which did not occur for S. mutans. Within the limitations of this study, a-SiO(x) coatings may affect the adhesion of bacteria such as S. mitis, possibly by changing the wettability of the composite resins investigated.