A comprehensive review on methods for promotion of mechanical features and biodegradation rate in amniotic membrane scaffolds

Multilayer amnion-PCL nanofibrous membrane loaded with celecoxib exerts a therapeutic effect against tendon adhesion by improving the inflammatory microenvironment

Tendon adhesion is a common complication after tendon surgery. The inflammatory phase of tendon healing is characterized by the release of a large number of inflammatory factors, whose mediated excessive inflammatory response is an important cause of tendon adhesion formation. Nonsteroidal anti-inflammatory drugs(NSAIDs) were used to prevent tendon adhesions by reducing the inflammatory response. However, recent studies have shown that the NSAIDs partially impairs tendon healing. Therefore, optimizing the anti-adhesive membrane loaded with NSAIDs to mitigate the effects on tendon healing requires further in-depth study. Amniotic membranes(AM) are natural polymeric semi-permeable membranes from living organisms that are rich in matrix, growth factors, and other active ingredients. In this study, we used electrostatic spinning technology to construct multifunctional nanofiber membranes of the PCL membrane loaded with celecoxib and AM. In vitro cellular assays revealed that celecoxib-loaded PCL membranes significantly inhibited the adhesion and proliferation of fibroblasts with increasing concentrations of celecoxib. In a rabbit tendon repair model, biomechanical tests further confirmed that the PCL membrane loaded with celecoxib had better anti-adhesion effects. Further experimental studies revealed that the PCL/AM membrane improved the inflammatory microenvironment by downregulating the expression of pro-inflammatory factors such as COX-2, IL-1β, and TNF-α proteins; and inhibiting the synthesis of COL I and COL Ⅲ. The PCL/AM membrane can continuously release celecoxib to reduce the inflammatory response and deliver growth factors to the damaged area to build a suitable microenvironment for tendon repair, which provides a new direction to improve the repair efficiency of tendon.

The Preparation and Clinical Efficacy of Amnion-Derived Membranes: A Review

Biological tissues from various anatomical sources have been utilized for tissue transplantation and have developed into an important source of extracellular scaffolding material for regenerative medicine applications. Tissue scaffolds ideally integrate with host tissue and provide a homeostatic environment for cellular infiltration, growth, differentiation, and tissue resolution. The human amniotic membrane is considered an important source of scaffolding material due to its 3D structural architecture and function and as a source of growth factors and cytokines. This tissue source has been widely studied and used in various areas of tissue repair including intraoral reconstruction, corneal repair, tendon repair, microvascular reconstruction, nerve procedures, burns, and chronic wound treatment. The production of amniotic membrane allografts has not been standardized, resulting in a wide array of amniotic membrane products, including single, dual, and tri-layered products, such as amnion, chorion, amnion-chorion, amnion-amnion, and amnion-chorion-amnion allografts. Since these allografts are not processed using the same methods, they do not necessarily produce the same clinical responses. The aim of this review is to highlight the properties of different human allograft membranes, present the different processing and preservation methods, and discuss their use in tissue engineering and regenerative applications.

Emerging Strategies for the Biofabrication of Multilayer Composite Amniotic Membranes for Biomedical Applications

The amniotic membrane (AM) is the innermost part of the fetal placenta, which surrounds and protects the fetus. Due to its structural components (stem cells, growth factors, and proteins), AMs display unique biological properties and are a widely available and cost-effective tissue. As a result, AMs have been used for a century as a natural biocompatible dressing for healing corneal and skin wounds. To further increase its properties and expand its applications, advanced hybrid materials based on AMs have recently been developed. One existing approach is to combine the AM with a secondary material to create composite membranes. This review highlights the increasing development of new multilayer composite-based AMs in recent years and focuses on the benefits of additive manufacturing technologies and electrospinning, the most commonly used strategy, in expanding their use for tissue engineering and clinical applications. The use of AMs and multilayer composite-based AMs in the context of nerve regeneration is particularly emphasized and other tissue engineering applications are also discussed. This review highlights that these electrospun multilayered composite membranes were mainly created using decellularized or de-epithelialized AMs, with both synthetic and natural polymers used as secondary materials. Finally, some suggestions are provided to further enhance the biological and mechanical properties of these composite membranes.

Biodegradability of Amniotic Membrane as Potential Scaffold for Periodontal Regeneration

Background In the periodontal regenerative procedure, the membrane used should possess good mechanical stability with suitable resorption time to allow restoration of the lost periodontium. Amniotic membrane (AM) has regenerative potential as a scaffold or barrier membrane due to its various beneficial properties. However, its degradation rate is not clearly reported. Methodology This study aimed to evaluate the resorption capacity of AM and its surface architecture after being subjected to hydrolytic degradation analysis in phosphate buffer solution (PBS). AM was cut into sizes of 10 × 10 mm2 for three replicates. The membranes were weighed before and at different time intervals (days 7, 14, 21, and 28) after immersion in PBS. The degradation rate was determined by the percentage of mean weight loss from the initial weight at different time intervals. The AM surface profile was observed under scanning electron microscopy (SEM) before and after 28 days of immersion. Results The result shows a 92% loss of weight over 28 days with the highest attained in the first seven days (67%), followed by 7%, 17%, and 1% after days 14, 21, and 28, respectively. SEM of the AM surface before the degradation test showed a polygonal shape forming a well-arranged mosaic pattern covered with microvilli. At day 28, the remaining AM appears as porous surface architecture, irregularly arranged fibers, and no microvilli seen. Conclusions This study demonstrated that over four weeks of degradation analysis, AM was not entirely degraded but had lost some of the microstructure. The biodegradability of AM should be further evaluated to elucidate its stability within adequate time parallel with the tissue healing process in periodontal tissue regeneration.

Mechanical reinforcement of amniotic membranes for vesicovaginal fistula repair

INTRODUCTION

Amniotic membranes (AM) have shown its great potential in reconstructive surgery due to their regenerative capacity. However, AM is regarded to be relatively weak when applied for load-bearing purposes. This study aims to produce an AM-based scaffold that can withstand the mechanical loads applied in vesicovaginal fistula repair. Different strategies are investigated to improve the mechanical characteristics of AM.

METHODS

Single and multilayered AM, and composite constructs of AM with electrospun poly-4-hydroxybutyrate (P4HB) or bovine pericardial tissue combined with the use of fibrin glue, were mechanically tested in this study. Suture retention strength and mechanical characteristics (tensile stress, elongation, tangent modulus and maximum load) were assessed by uniaxial testing. The effect of degradation of the composite constructs on the mechanical characteristics was determined by uniaxial testing after 4 and 8 weeks.

RESULTS

Single and multilayered AM could not provide the mechanical requirements needed for surgical implantation (>2N load). AM was combined successfully with electrospun P4HB and bovine pericardium with the use of fibrin glue and were able to exceed the 2N load.

CONCLUSION

The composite constructs with AM showed sufficient mechanical characteristics for surgical implantation. Electrospun P4HB combined with AM seemed the most promising candidate since the mechanical characteristics of P4HB can be further modified to meet the requirements of the application site and the degradation of the P4HB allows a gradual transfer of load. Eventhough the scaffold is intended for fistula repair, it can potentially be applied in surgical reconstruction of other hollow organs by modifying the mechanical characteristics.

Carbodiimide crosslinked decellularized lenticules as a drug carrier for sustained antibacterial eye treatments

In this study, the drug-loading and antibacterial activity of carbodiimide/N-hydroxysuccinimide (EDC/NHS) crosslinked decellularized lenticules (CDLs) were evaluated. Small incision lenticule extraction derived lenticules were decellularized and modified with crosslinking concentrations of 0.00 (E/L00, non-crosslinked), 0.01 (E/L01), 0.05 (E/L05) and 0.25 mmol (E/L25) EDC per mg lenticules at 5:1 EDC/NHS ratios with non-decellularized non-crosslinked lenticules (NDLs) as controls. NDLs and EDC/NHS CDLs had similar water contents. The light transmittance percentages (400-800 nm) were 91.55 ± 1.16%, 88.68 ± 1.19%, 80.86 ± 1.94%, 85.12 ± 2.42% and 85.62 ± 2.84% for NDLs, E/L00, E/L01, E/L05 and E/L25, respectively (P< 0.01). The EDC/NHS CDLs (diameter: 6.36 ± 0.18 mm; central thickness: 117.31 ± 3.46 μm) were soaked in 3% (wt./vol.) levofloxacin (LEV) solution for 3 h. The drug release concentrations of LEV-impregnated EDC/NHS CDLs were determined by high-performance liquid chromatography. Zone inhibition (ZOI) againstStaphylococcus aureusof E/L01, E/L05 and E/L25 were superior to E/L00 CDLs (P< 0.01) and among the different crosslinked groups, E/L05 lenticules produced the largest ZOIs and their drug concentration release over 21 d was the highest. EDC/NHS crosslinking can improve the drug-loading effect and antibacterial activity of decellularized lenticules. LEV-impregnated EDC/NHS CDLs are promising drug delivery carriers.