Highly Sensitive Fluorescence Optode Based on Polymer Inclusion Membranes for Determination of Al(III) Ions

A 3D origami paper-based analytical device combined with PVC membrane for colorimetric assay of heavy metal ions: Application to determination of Cu(II) in water samples

Microfluidic paper-based analytical devices (μPADs) as a potentially powerful analytical platform have recently gained significant attention for on-site monitoring of heavy metal ions, which are one of the most significant environmental concern because of non-degradability and high toxicity. The commonly applied μPADs suffers from some defects, such as heterogeneous deposition of reagent, resulting in poor detection limits and low sensitivity. So, in this work, a three-dimensional origami μPAD combined with PVC Membrane was developed, which can manage problems of movement of colored products or leaching out the dye and leading to color heterogeneity in the detection zones. Furthermore, a waste layer was added to μPAD for loading of more amounts of the analyte, which results in improvement of detection limit. As a proof of concept, the μPAD was used for the analysis of Cu²⁺ ion. For this purpose, pyrocatechol violet and chrome azurol S as colorimetric reagents were doped into PVC membrane and injected in the detection zone. The proposed μPAD was presented good linearity in the ranges of 5.0-1400.0 and 5.0-200.0 mg L^-1, and the limits of detections of 1.7 and 1.9 mg L^-1 in presence of chrome azurol S and pyrocatechol violet, respectively.

Design and optimization of a single-use optical sensor based on a polymer inclusion membrane for zinc determination in drinks, food supplement and foot health care products

A single-use optical sensor was designed for Zn(II) determination based on the immobilisation of the colorimetric reagent 2-acetylpyridine benzoylhydrazone (2-APBH) in a polymer inclusion membrane (PIM) adhered on the surface of an inert rectangular strip of polyester (Mylar). Different components for the membrane preparation were tested and those resulting in membrane with good appearance, proper physical and optical properties and ease of preparation were selected. Factorial design 23 with three replicates of the central point was applied for the optimisation of the membrane composition. The optimal composition consisted of 2.5 g of poly(vinyl chloride) (PVC), 4 mL of tributyl phosphate (TBP) and 0.04 g of 2-APBH. The optode showed a linear dynamic range from 0.03 (detection limit) to 1 mg L-1 of Zn(II) ions with a response time of 30 min in aqueous solution at pH 6 and a relative standard deviation of 3.90% for 0.4 mg L-1 of Zn(II). The sensor exhibited good selectivity to Zn(II) over other commonly ions. It was successfully applied to the determination of Zn(II) in a water certified reference material, spiked tap water, vitamin-mineral drink, food supplement and foot health care products, as contribution to the concern about this heavy metal due to its significant role in many biological and physiological processes although toxicant at high doses.

Polymer inclusion membranes (PIMs) in chemical analysis - A review

This review highlights the increasing interest in polymer inclusion membranes (PIMs) in analytical chemistry as they are adapted to new and novel applications. PIMs are polymer-based liquid membranes and were first introduced 50 years ago as the sensing membranes in ion-selective electrodes and optodes. More recently however, PIMs have been used for other applications in analytical chemistry such as for sample separation, sample pre-concentration, electro-driven extraction, and passive sampling, and have also been incorporated into on-line and automated analysis systems. The present review provides a general overview of the analytical chemistry applications of PIMs reported in the literature to date and illustrates their versatility for solving challenging chemical analysis problems.