Spectrofluorimetric Determination of Topiramate and Levetiracetam as Single Components in Tablet Formulations and in Human Plasma and Simultaneous Fourth Derivative Synchronous Fluorescence Determination of their Co-Adminstered Mixture in Human Plasma

A Greener Stability-Indicating High-Performance Thin-Layer Chromatography Approach for the Estimation of Topiramate

Despite various reported analytical methods for topiramate (TPM) analysis, greener analytical approaches are scarce in literature. As a consequence, the objective of the current research is to design a normal-phase stability-indicating high-performance thin-layer chromatography (SI-HPTLC) methodology for TPM analysis in marketed tablet dosage forms that is rapid, sensitive, and greener. TPM was derivatized densitometrically and analyzed at 423 nm in visible mode with anisaldehyde-sulfuric acid as the derivatizing agent. The greener SI-HPTLC technique was linear in the 30-1200 ng band-1 range. In addition, the suggested SI-HPTLC methodology for TPM analysis was simple, rapid, cheaper, precise, robust, sensitive, and environmentally friendly. The greener SI-HPTLC method was able to detect TPM along with its degradation products under acid, base, and oxidative degradation conditions. However, no TPM degradation was recorded under thermal and photolytic stress conditions. TPM contents in commercial tablet dosage forms were recorded as 99.14%. Using 12 different principles of green analytical chemistry, the overall analytical GREEnness (AGREE) score for the greener SI-HPTLC method was calculated to be 0.76, confirming the proposed normal-phase SI-HPTLC method's good greener nature. Overall, these results demonstrated that the suggested SI-HPTLC technique for TPM measurement in pharmaceutical products was reliable and selective.

Eco-friendly analytical methods for the determination of compounds with disparate spectral overlapping: application to antiviral formulation of sofosbuvir and velpatasvir

Green analytical chemistry is one of the newest trends in analytical chemistry nowadays targeting the concept of green laboratory practices on chemists and environment. In this text, green practices are proposed in this work for the determination of sofosbuvir (SF) and velpatasvir (VP) in their pharmaceutical formulation. The analysis of SF in a binary mixture with VP represents an analytical challenge due to the complete overlapping of the UV spectrum of SF by that of VP. Therefore, the direct absorbance and derivative measurements cannot resolve such interference and failed to determine SF. In this paper, three direct and simple methods were developed for the analysis of SF without any interference from VP without sample pre-treatment. The proposed methods include measuring the second derivative amplitude of the ratio spectrum of the mixture using VP as a divisor, measuring the absorbance difference of the mixture in NaOH solution against its HCl solution, and using the derivative compensation technique. On the other hand, VP was determined specifically in presence of SF by two methods. Firstly, by its reaction with 4-chloro-7-nitrobenzofurazan (NBD-Cl) where the reaction product was measured spectrophotometrically and spectrofluorometrically and secondly through the reaction of VP with 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH). The calibration curves showed good correlation coefficient (r2 > 0.999). The developed methods were highly precise with RSD% values less than 2%. The method greenness profile was compared with other published methods by applying the eco-scale protocol. Assessment results proved that our analytical procedure is greener than other reported methods. Moreover, upon comparison with other methods, the proposed methods showed better or comparable sensitivity in addition to being inexpensive and ecofriendly. Accordingly, these methods could be readily applied for quality control purposes as an eco-friendly, simple and efficient analytical tool.

New Methods Used in Pharmacokinetics and Therapeutic Monitoring of the First and Newer Generations of Antiepileptic Drugs (AEDs)

The review presents data from the last few years on bioanalytical methods used in therapeutic drug monitoring (TDM) of the 1st-3rd generation and the newest antiepileptic drug (AEDs) cenobamate in patients with various forms of seizures. Chemical classification, structure, mechanism of action, pharmacokinetic data and therapeutic ranges for total and free fractions and interactions were collected. The primary data on bioanalytical methods for AEDs determination included biological matrices, sample preparation, dried blood spot (DBS) analysis, column resolution, detection method, validation parameters, and clinical utility. In conclusion, the most frequently described method used in AED analysis is the LC-based technique (HPLC, UHPLC, USLC) combined with highly sensitive mass detection or fluorescence detection. However, less sensitive UV is also used. Capillary electrophoresis and gas chromatography have been rarely applied. Besides the precipitation of proteins or LLE, an automatic SPE is often a sample preparation method. Derivatization was also indicated to improve sensitivity and automate the analysis. The usefulness of the methods for TDM was also highlighted.

Dual sensing and synchronous fluorescence spectroscopic monitoring of Cr3+and Al3+ using a luminescent Schiff base: Extraction and DFT studies

A well designed, new pyrene based small molecule (L) was synthesized from 1:1 condensation reaction of 1-aminopyrene and 6-(1,3-benzodioxal-5-yl)-2-pyridine carboxaldehyde which was characterized by absorption, emission spectrometry, FTIR, NMR and mass studies. Interestingly the UV-vis and fluorescence spectroscopic studies revealed that the ligand (L) works as a dual turn-on luminescent chemosensor for chromium(III) (Cr³⁺) and aluminium(III) (Al³⁺) in aqueous environment which were further supported by DFT and TDDFT studies. L shows a significant colour change from pale yellow to reddish yellow with a detection limit of ~10^-9 M in the presence of Cr³⁺ and Al³⁺ whereas there were no noteworthy changes in the presence of other monovalent and divalent metal ions. The molecular signaling in the presence of Cr³⁺, Al³⁺, Fe³⁺ and EDTA was compared with advanced level combinational INHIBIT gate based on 4 input logic gates. Herein, first derivative constant wavelength synchronous fluorescence spectroscopy (1^st DCWSFS) was applied for the determination of Cr³⁺, Al³⁺ ion concentrations in a mixture via increment of spectral resolution of the respective overlapping peaks. 1^st DCWSFS is reported to be used in pharmaceuticals but very few works have been done for determination of metal ion concentration in environmental sample without prior separation. The individual Cr³⁺and Al³⁺ ion concentrations in a mixture were determined through liquid-liquid extraction process and the efficiencies were compared with 1^st derivative SFS method. It was observed that 1^st derivative SFS process is more efficient than conventional liquid-liquid extraction process. Therefore, 1^st DCWSFS method using sensor L might be useful as a diagnostic tool for detection of individual metal ion concentrations (Cr³⁺ and Al³⁺) from a mixture which will be cost-effective, time saving and more precise.

Highly sensitive UHPLC-DAD method for simultaneous determination of two synergistically acting antiepileptic drugs; levetiracetam and lacosamide: Application to pharmaceutical tablets and human urine

A simple and highly sensitive ultra-high-performance liquid chromatographic-diode array (UHPLC-DAD) detection method was developed and validated for the simultaneous estimation of levetiracetam (LEV) and lacosamide (LAC). It was clinically proven that the combination of LEV and LAC exhibits a synergistic effect against refractory seizures in mice, which was the motivation for the analysis of this binary mixture both in bulk and in human urine samples. The binary mixture was resolved on a Hypersil BDS C₁₈ analytical column, utilizing a mobile phase of 0.050 mol L^-1 phosphate buffer (pH 5.60), methanol and acetonitrile in the ratio (80:10:10 v/v/v) using catechol as an internal standard. The mobile phase was pumped at a flow rate of 1.2 mL min^-1 with diode array detection at 205 nm for both drugs and 270 nm for IS. Calibration curves were linear with correlation coefficient >0.9990 over the studied concentration range of 0.1-70.0 μg mL^-1 for both drugs. The developed method was reproducible with low relative standard deviation values for intra- and inter-day precision (<2.0%). Both drugs were determined in bulk, pharmaceutical formulations and human urine samples without any interference from complex matrices.

Simultaneous evaluation of losartan and amlodipine besylate using second-derivative synchronous spectrofluorimetric technique and liquid chromatography with time-programmed fluorimetric detection

This study is concerned with two sensitive, fast and reproducible approaches; namely, second-derivative synchronous fluorimetry (method I) and reversed phase high-performance liquid chromatography with fluorimetric detection (method II) for synchronized evaluation of losartan (LOS) and amlodipine besylate (AML). Method I is based on measuring second-derivative synchronous fluorescence spectra of LOS and AML at Δλ = 80 nm in water. The experimental factors influencing the synchronous fluorescence of the considered compounds were sensibly adjusted. The chromatographic analysis was executed on a Nucleodur MN-C18 column of dimensions; 250 × 4.6 mm i.d. and 5 µm particle size). The fluorimetric detection was time-programmed at λem = 440 nm for AML (0.0-7.5 min) and at λem = 400 nm for LOS (7.5-10 min) after excitation at λex = 245 nm. The mobile phase is a blend of acetonitrile with 0.02 M phosphate buffer in a proportion of 45 : 55, pH 4.0, pumped using a flow rate of 1 ml min-1. The calibration plots were established to be 0.1-4.0 µg ml-1 for both drugs in method I and 0.05-4.0 µg ml-1 for both drugs in method II. The study was extended to the evaluation of the two drugs in their co-formulated tablets.

Levetiracetam

A comprehensive profile of levetiracetam is presented in this chapter which includes its description, formula, elemental analysis, appearance, uses and applications. Different earlier studies included for example methods of synthesis are described with its typical structural schemes. The profile also listed the drug's physical characteristics indicating its solubility, X-ray powder diffraction pattern, thermal methods of analysis as well as its spectroscopic characteristics. Different methods of analysis which includes compendial method of analysis, as well as reported method of analysis which include spectrophotometry, spectrofluorometry, electrochemical method, chromatographic method, and immunoassay method of analysis. The study was include drug stability, clinical pharmacology, e.g., mechanism of action, pharmacokinetic study. Around 70 references are recorded as a proof of this chapter.

Topiramate: Comprehensive profile

Topiramate, 2,3:4,5-di-O-isopropylidene-β-d-fructopyranose sulfamate, is a potent antiepileptic drug with a broad spectrum of activity. It is effective in both partial and generalized seizures. Topiramate was also found to have significant efficacy in migraine prevention with considerable reductions in the frequency of migraine headaches. The most common adverse events, which may accompany the use of topiramate, are paresthesia, fatigue, decreased appetite, nausea, diarrhea, weight decrease and taste perversion. The weight loss observed with the use of topiramate in obese, epileptic patients, afforded the approval of this drug as an anti-obesity medication. This action is thought to be based on the selective inhibition of mitochondrial carbonic anhydrase isoforms. This profile is prepared to discuss and explain physical characteristics, proprietary and nonproprietary names of topiramate. It also includes methods of preparation, thermal and spectral behavior and methods of analysis. Pharmacokinetics, metabolism, excretion and pharmacology together with its uses and applications are also discussed.

Sensitive inexpensive spectrophotometric and spectrofluorimetric analysis of ezogabine, levetiracetam and topiramate in tablet formulations using Hantzsch condensation reaction

Two highly sensitive, simple and selective spectrophotometric and spectrofluorimetric assays have been investigated for the analysis of ezogabine, levetiracetam and topiramate in their pure and in pharmaceutical dosage forms. The suggested methods depend on the condensation of the primary amino-groups in the three drugs with acetylacetone and formaldehyde according to Hantzsch reaction yielding highly fluorescent yellow colored dihydropyridine derivatives. The reaction products of ezogabine, levetiracetam and topiramate were measured spectrophotometrically at 418, 390 and 380nm or spectrofluorimetrically at λ_em/ex of 495/425nm, 490/415nm and 488/410nm, respectively. Various experimental conditions have been carefully studied to maximize the reaction yield. At the optimum reaction conditions, the calibration curves were rectilinear over the concentration ranges of 8-25, 60-180 and 80-200μg/mL spectrophotometrically and 0.02-0.2, 0.2-1.2 and 0.2-1.5μg/mL spectrofluorimetrically for ezogabine, levetiracetam and topiramate, respectively with good correlation coefficients. The suggested methods were applied successfully for the analysis of ezogabine, levetiracetam and topiramate in their commercial tablets with high percentage recoveries and negligible interference from various excipients in pharmaceutical dosage forms. The results were statistically analyzed and showed the absence of any significant difference between both developed and published methods. The procedures were validated and evaluated by the ICH guidelines revealing good reproducibility and accuracy. Therefore, the two proposed methods may be considered of high interest for practical and reliable analysis of ezogabine, levetiracetam and topiramate in pharmaceutical dosage forms.

Chromatographic determination of zonisamide, topiramate and sulpiride in plasma by a fluorescent 'turn-on' chemosensor

AIM

Antiepileptics (AEDs) and antipsychotics are often coprescribed. Interactions between these drugs may affect both efficacy and toxicity. Therefore, drug monitoring is necessary for appropriate dosage adjustments.

MATERIALS & METHODS

Specific 'turn-on' chemosensor, 4-chloro-7-nitrobenzofurazan is used for selective and sensitive determination of two AEDs: zonisamide (ZON) and topiramate (TOP) with the antipsychotic sulpiride (SUL) in epileptic patients' plasma followed by reversed-phase-HPLC separation without any interference.

RESULTS

Linear behavior was observed in the range of 0.1-3 μg/ml and 0.01-0.5 μg/ml for the AEDs and SUL, respectively, with LOD of 33, 46 and 4 ng/ml and LOQ of 86, 93 and 9 ng/ml for ZON, TOP and SUL, respectively. The proposed method was successfully applied for determination of different pharmacokinetic parameters of ZON and TOP, and for clinical monitoring of the three drugs in healthy volunteers following oral administration.

CONCLUSION

The developed method is suitable for the routine therapeutic drug monitoring of these drugs.

A simple and cost-effective HPLC-UV method for the detection of levetiracetam in plasma/serum of patients with epilepsy

A simple, fast and cost-effective method was developed and validated for the determination of levetiracetam (LEV) in plasma/serum of patients using high performance liquid chromatography (HPLC) with ultraviolet detection. The stability of LEV plasma/serum samples over time and in different blood collection tubes was evaluated. Serum/plasma samples were deproteinized by methanol spiked with the internal standard, gabapentin. HPLC was carried out on a Venusil XBP C₁₈ , 250 × 4.6 mm, 5 μm column, at a flow rate of 1.0 mL/min and with mobile phase consisting of 50 mm potassium dihydrogen phosphate-acetonitrile at a pH of 5.5. The UV detector was set at 205 nm and 10 μL was injected. Total runtime was 15 min. Calibration curves were linear (correlation coefficient = 0.999) over a concentration range of 1-60 μg/mL. Relative standard deviation values for both the inter-day and intra-day precision and accuracy were <5% for the concentration range. The influence of different collection tubes and the effect of time on the stability of LEV was investigated. These factors may cause inaccuracies owing to drug-protein binding and interference in the matrix. This method is simple, fast, cost-effective, reliable and accurate with minimal sample preparation for daily routine use in therapeutic drug monitoring.