Triphenylamine-Based Fluorescent Styryl Dyes: DFT, TD-DFT and Non-Linear Optical Property Study

Bridged triphenylamine-based fluorescent probe for selective and direct detection of HSA in urine

Human serum albumin (HSA) serves as a crucial indicator for therapeutic monitoring and biomedical diagnosis. In this study, a near infrared (NIR) fluorescent probe, termed BTPA, characterized a donor-π-acceptor (D-π-A) structure based on bridged triphenylamine (TPA) was developed. BTPA exhibited outstanding sensitivity and selectivity towards HSA among various analysts, with a remarkable 50-fold fluorescence enhancement with a significant Stokes shift (∼190 nm) and a wide linear detection range of 0-20 μM of HSA. Especially, BTPA displayed selectivity for discrimination of HSA from BSA. Job's Plot analysis suggested a 1:1 stoichiometry for the formation of the BTPA-HSA complex. Displacement assays and molecular docking demonstrated that BTPA binds to subdomain IB of HSA which could effectively avoid interference from most drugs. Besides, BTPA have good biocompatibility and could detect of exogenous HSA with a relatively low fluorescence background. For practical applications, BTPA was tested for detecting HSA levels in human urine without any pretreatment, showing detection capability in the range of 0-10 μM with a fast response (<30 s), a limit of detection (LOD) of 0.12 μM and good recoveries (81.7-92.9 %), highlighting the high performance of bridged triphenylamine-based probe BTPA.

Exploring the Efficiency of C343 Coumarin Dye-Sensitized Solar Cells Using Substituents

Coumarin dyes are used in dye-sensitized solar cells due to their fluorescent nature and solar stability. However, coumarin dyes exhibit limited absorption of light in the visible region, making it essential to improve their performance in dye-sensitized water-splitting solar cells. The current study uses computational chemistry methods to investigate the light absorption capacity of a coumarin dye by altering the chromophoric system and applying an electric field. Eight novel dyes were considered from the reference coumarin C343 dye, and they were studied using DFT, TD-DFT, and a solar cell capacitance simulator. The absorption spectra of some of the substituted dyes show a redshift, indicating a decrease in the HOMO-LUMO gap, which is suitable for solar cell application. One of the derivatives was found to be most effective, with a band gap of 2.24 eV in the gas phase and 1.78 eV in water; a maximum absorption wavelength of 554 nm in the gas phase and 698 nm in water; a power conversion efficiency of 10.2% under standard AM 1.5 irradiation (100 mW cm-2).

Role of donors in triggering second order non-linear optical properties of non-fullerene FCO-2FR1 based derivatives: A theoretical perspective

The organic compounds are known as an emerging class in the field of nonlinear optical (NLO) materials. In this paper, D-π-A configured oxygen containing organic chromophores (FD2-FD6) were designed by incorporating various donors in the chemical structure of FCO-2FR1. This work is also inspired by the feasibility of FCO-2FR1 as an efficient solar cell. Theoretical approach involving DFT functional i.e., B3LYP/6-311G(d,p) was utilized to achieve useful information regarding their electronic, structural, chemical and photonic properties. The structural modifications revealed significant electronic contribution in designing HOMOs and LUMOs for the derivatives with lowered energy gaps. The lowest HOMO-LUMO band gap obtained was 1.223 eV for FD2 compound in comparison to the reference molecule (FCO-2FR1) i.e., 2.053 eV. Moreover, the DFT findings revealed that the end-capped substituents play a key role in enhancing the NLO response of these push-pull chromophores. The UV-Vis spectra of tailored molecules revealed larger λ _max values than the reference compound. Furthermore, strong intramolecular interactions showed the highest stabilization energy (28.40 kcal mol^-1) for FD2 in the natural bond orbitals (NBOs) transitions, combined with the least binding energy (-0.432 eV). Successfully, the NLO results were favorable for the same chromophore (FD2) which showed the highest value for dipole moment (μ _tot = 20.049 D) and first hyper-polarizability (β _tot = 11.22 × 10^-27 esu). Similarly, the largest value for linear polarizability ⟨α⟩ was obtained as 2.936 × 10^-22 esu for FD3 compound. Overall, the designed compounds were calculated with greater NLO values as compared to FCO-2FR1. The current study may provoke the researchers towards designing of highly efficient NLO materials via using the suitable organic linking species.

Influence of End-Capped Modifications in the Nonlinear Optical Amplitude of Nonfullerene-Based Chromophores with a D-π-A Architecture: A DFT/TDDFT Study

Nonlinear optical (NLO) materials have several uses in many fields such as solid physics, biology, medicine, nuclear physics, and material research. Therefore, a series of nonfullerene-based derivatives (CC10D1-CC10D8) with a D-π-A configuration was planned for the NLO investigation using CC10R as the reference molecule with structural alternations at acceptor moieties. Natural bonding orbital (NBO), UV-vis spectra, frontier molecular orbitals (FMOs), global reactivity parameters (GRPs), transition density matrix (TDM), and density of states (DOS) were analyzed using the M06/6-311G(d,p) functional in chloroform solvent to understand the NLO responses of CC10R and CC10D1-CC10D8. The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) band gaps of CC10D1-CC10D6 were illustrated to be lower than that of CC10R, with the larger bathochromic shift (726.408-782.674 nm) resulting in a significant NLO response. Along with the band gap, the FMO method also identified an efficient interfacial charge transfer from D to A moieties via a π-bridge, which was further supported by the DOS and TDM map. Moreover, NBO calculations demonstrated that extended hyperconjugation and strong internal molecular interactions were important in their stabilization. The dipole moment (μ), linear polarizability ⟨α⟩, hyperpolarizability (β_total), and second-order hyperpolarizability (γ_total.) were studied for CC10R and CC10D1-CC10D8. Among all of the derivatives, CC10D2 was proven to be the most appropriate candidate because of its suitable NLO behavior such as being well-supported by a reduced band gap (2.093 eV) and having a suitable maximum absorption wavelength (782.674 nm). Therefore, CC10D2 was reported to have a greater value of first hyperpolarizability (208 659.330 a.u.) compared with other derivatives and CC10R. For the second hyperpolarizability, a greater value was obtained for CC10R (5.855 × 10⁷ a.u.), and its derivatives showed results comparable to that of the parent chromophore for γ_total. This theoretical framework reveals that structural customization with different acceptor units plays a significant role in obtaining attractive NLO materials for optoelectronic applications.

Chlorine (Cl) - Substituted Carbazole Based A-π-D-π-a Push-Pull Chromophores as Aggregation Enhanced Emission (AEE) Active Viscosity Sensors: Synthesis, DFT and NLO Approach

Three new carbazole functionalized A-π-D-π-A extended chromophores 4a, 4b and 4c comprising of different chemical functional groups on C=C bond with the assistance of chlorovinylene group in π-conjugation are synthesized and investigated spectroscopically. We have investigated the effect of different electron acceptors - carboxycyanomethylene, dicyanomethylene and 2-(benzothiazol-2-yl) cyanomethylene, the effect of the insertion of chlorine in π-conjugation on photophysical properties and the effect of double acceptors. The chromophores 4a, 4b and 4c exhibited positive solvatochromism with large Stokes shifts and bright orange to red solid-state fluorescence. Amongst all the three compounds 4c exhibited maximum emission wavelength at 615 nm in DMSO. They presented characteristic twisted intramolecular charge transfer (TICT) emission. Observations exhibited that 4c containing long hexyl group in donor unit and 2-(benzothiazol-2-yl) cyanomethylene as an acceptor group formed an aggregate in the mixture of solvents and exhibited better aggregation enhanced emission (AEE) compared to the other two derivatives. Amongst the three styryls, 4c showed the highest emission intensity 299 a.u. at 90% water:DMF fraction (f_w). Chromophores 4a-4c also exhibited good fluorescence response towards viscosity. Among the three fluorescent molecular rotors (FMR), 4c exhibited excellent viscosity sensitivity with x value = 0.687. The Non-linear (NLO) characters are estimated with the help of solvatochromic and computational methods using the functionals, B3LYP and CAM-B3LYP. The dyes showed large "linear polarizability (α_CT)", "first order hyperpolarizability" (β) and "second order hyperpolarizability" (γ) values which show that synthesized styryls can be used as a "NLO" material. The α_CT, β and γ for 4c are found to be the maximum amongst the all three dyes which can be ascribed to the smaller band gap apparent from experimental as well as DFT method.

NLOphoric Triphenylamine Derived Donor-π-Acceptor-π-Donor Based Colorants: Synthesis, Spectroscopic, Density Functional Theory and Z-scan Studies

Three Donor-π-Acceptor-π-Donor type styryl dyes (5a-c) with different secondary donors are synthesized and characterized to study their nonlinear and linear optical properties. The structure-property relationships of the dyes are described in the light of systematic photophysical and theoretical investigations. The photophysical characteristics of 5a-c are influenced by the polarity of the medium, with an appreciable bathochromic shift in emission (5b = 81 nm) and large Stoke shifts (5b = 104-173 nm) in polar solvents. 5a-c showed intramolecular charge transfer characteristics recognized with the help of emission solvatochromism, solvent polarity graphs, natural bond orbital analysis and HOMO-LUMO energy difference. The optimized geometry and frontier molecular orbitals reveal that the electron donation takes place from secondary donors and not from a fixed donor (triphenylamine) which is more twisted. The nonlinear optical properties obtained using solvent induced spectral shift and computational methods are found within the limiting values. Z-scan results reveal saturable kind of behavior for 5a, 5b and 5c, whereas 5a and 5b show reverse saturable kind of behavior in acetone and ethanol and hence give optical limiting values. The two-photon absorption cross section described by two-level approximation is highest for 5b (251-300 GM).