A New Fluorescent “Turn-Off” Coumarin-Based Chemosensor: Synthesis, Structure and Cu-Selective Fluorescent Sensing in Water Samples

Coumarin Based Fluorescent Probe for Detecting Heavy Metal Ions

Heavy metals such as Iron, Copper, and Zinc are micro-essential trace metal and involve animportant biological role, but it quickly turns toxic at exceeding the permissible limit, causing gastrointestinal irritation, liver, bone, and kidney damage, as well as disorders including Wilson's, Parkinson's, and Alzheimer's. It is important to detect the metal ions as well as their concentration quickly and affordable cost using organic probes. Among the organic probes,the coumarin fluorescent probe shows a very prominent candidate with heavy metal ions. Therefore, in the present review, we reviewed the very recent literature the identify the heavy metals using modified coumarin fluorescent probes. Readers will get information quickly about the method of preparation of modified coumarin core and their use as fluorescent probes with heavy metals using absorption and emission spectroscopic methods along with the probable mechanistic pathway of detection.

Shedding Novel Photophysical Insights Toward Discriminative Detection of Three Toxic Heavy Metal Ions and a hazard class 1 nitro-explosive By Using a Simple AIEE Active Luminogen

In this work, we introduced a simple aggregation-induced emission enhancement (AIEE) sensor (PHCS) which can selectively detect and discriminate three environmentally and biologically imperative heavy metal ions (Cu2+, Co2+ and Hg2+) and a hazard class 1 categorized nitro-explosive picric acid (PA) in differential media. By virtue of its weak fluorescence attributes in pure organic medium owing to the synergistic operation of multiple photophysical quenching mechanisms, the molecular probe showcased highly selective 'TURN ON' fluorogenic response towards hazardous Hg2+ with a limit of detection (LOD) as low as 97 nM. Comprehensive investigation of binding mechanism throws light on the cumulative effect of probe-metal complexation induced chelation enhanced fluorescence (CHEF) effect and subsequent AIEE activation within the formed probe-metal adducts. Noteworthily, the probe (PHCS) can be readily used in real water samples for the quantitative determination of Hg2+ in a wide concentration range. In addition, the probe displayed modest colorimetric recognition performances to selectively detect and discriminate two essential heavy metal ions (Cu2+ and Co2+) with a LOD of 96 nM and 65 nM for Cu2+ and Co2+ respectively, in semi-aqueous medium. Intriguingly, based on high photoluminescence efficiency, the AIEE active nano-aggregated PHCS displayed a remarkable propensity to be used as a selective and ultra-sensitive 'TURN-OFF' fluorogenic chemosensor towards PA with LOD of 34.4 ppb in aqueous medium. Finally, we specifically shed light on the interaction of PHCS hydrosol towards PA using some unprecedented techniques, which helped uncover new photophysical insights of probe-explosive molecule interaction.

One-Pot, In-Situ Synthesis of 8-Armed Poly(Ethylene Glycol)-Coated Ag Nanoclusters as a Fluorescent Sensor for Selective Detection of Cu2

Fluorescent nanomaterials, such as quantum dots, have developed rapidly in recent years and have been significantly developed. Herein, we demonstrate a facile, one-pot, and in-situ synthesis strategy to obtain fluorescent silver nanoclusters (AgNCs) coated with eight-armed poly (ethylene glycol) polymers (8PEG-AgNCs) via a direct gel-mediated process. During the synthesis, ammonium (NH₃) served as the crosslinker for the gel formation via a amine-type Michael addition reaction. This hydrogel can be used as a template to synthesize AgNCs using its volume-limiting effect. The in-situ generation of AgNCs takes place inside the nanocages of the formed gels, which guarantees the homogenous distribution of AgNCs in the gel matrix, as well as the efficient coating of PEG on the nanoclusters. After the degradation of gels, the released 8PEG-AgNCs nanohybrids showed strong blue fluorescence and exhibited long-term stability in aqueous solution for nearly one year. Results showed that the fabricated sensor revealed excellent fluorescent sensitivity for the selective detection of Cu²⁺ with a detection limit of 50 nM and a wide linear detection range of 5–100 μM. It is proposed that the greater cross-linking density leads to smaller gel pores and allows the synthesis of AgNCs with fluorescent properties. These results indicate that this novel hydrogel with certain biodegradation has the potential to be applied as a fluorescent sensor for catalytic synthesis, fluorescence tracing in cells, and fluorescence detection fields. Meanwhile, the novel design principle has a certain versatility to accelerate the development and application of other kinds of metal nanoclusters and quantum dots.

Furo[3,2-c]coumarin-derived Fe3+ Selective Fluorescence Sensor: Synthesis, Fluorescence Study and Application to Water Analysis

Furocoumarin (furo[3,2-c]coumarin) derivatives have been synthesized from single step, high yielding (82-92%) chemistry involving a 4-hydroxycoumarin 4 + 1 cycloaddition reaction. They are characterized by FTIR, 1H-NMR, and, for the first time, a comprehensive UV-Vis and fluorescence spectroscopy study has been carried out to determine if these compounds can serve as useful sensors. Based on the fluorescence data, the most promising furocoumarin derivative (2-(cyclohexylamino)-3-phenyl-4H-furo[3,2-c]chromen-4-one, FH), exhibits strong fluorescence (ФF = 0.48) with long fluorescence lifetime (5.6 ns) and large Stokes' shift, suggesting FH could be used as a novel fluorescent chemosensor. FH exhibits a highly selective, sensitive and instant turn-off fluorescence response to Fe3+ over other metal ions which was attributed to a charge transfer mechanism. Selectivity was demonstrated against 13 other competing metal ions (Na+, K+, Mg2+, Ca2+, Mn2+, Fe2+, Al3+, Ni2+, Cu2+, Zn2+, Co2+, Pb2+ and Ru3+) and aqueous compatibility was demonstrated in 10% MeOH-H2O solution. The FH sensor coordinates Fe3+ in a 1:2 stoichiometry with a binding constant, Ka = 5.25 × 103 M-1. This novel sensor has a limit of detection of 1.93 µM, below that of the US environmental protection agency guidelines (5.37 µM), with a linear dynamic range of ~28 (~2-30 µM) and an R2 value of 0.9975. As an exemplar application we demonstrate the potential of this sensor for the rapid measurement of Fe3+ in mineral and tap water samples demonstrating the real-world application of FH as a "turn off" fluorescence sensor.

Biosynthesized Gold Nanoparticles: In Vivo Study of Near-Infrared Fluorescence (NIR)-Based Bio-imaging and Cell Labeling Applications

Near infrared (NIR) fluorescence imaging is a striking imaging modality for biomedical and clinical applications due to its deep tissue penetration and low phototoxicity. The major issue with NIR dyes is their non-specific distribution and requirement of tagging with biomolecules for specific tissue localization. Till now, there have been no imaging agents available that can distribute into a specific organ without the need for targeted ligands, which remains as an unmet clinical need. In the present study, we demonstrate that the Zinnia elegans plant extract (abbreviated as ZE) assisted synthesis of highly biocompatible gold nanoparticles (AuZE), leading to their non-invasive bio-imaging applications in the NIR region (red at 820 nm emission: NIR region). AuZE and ZE both exhibited green fluorescence at 350 nm excitation and red fluorescence in the NIR region (710 nm). We verified the source of this fluorescence, which originates from the fluorescent molecules present in the ZE extract. After intraperitoneal administration in C57BL6 mice, very interestingly, AuZE is distributed into the brain of C57BL6 mice without the need for any targeted ligand and exhibited bright red fluorescence in the NIR region (710 nm excitation, 820 nm emission) as evidenced by non-invasive imaging as well as ICPOES techniques. We further explored the activity of ZE and AuZE as cell labeling agents (B16F10 cells were pre-incubated with AuZE and implanted into mice, and the fluorescence was monitored), which could be applicable for graft transplantation biology. To the best of our knowledge, this is the first report that demonstrates the versatile applications of green synthesized gold nanoparticles using a ZE extract. Considering these exciting results and fruitful outcomes, the ZE and AuZE NPs would stand as an alternative imaging agent to commercially available NIR dyes and change the conventional fluorescence-based bio-imaging strategies. Therefore, the biosynthesized AuNPs open new directions for future research to explore these latest observations in the field of disease diagnosis and therapy.

Coumarin-Based Small-Molecule Fluorescent Chemosensors

Coumarins are a very large family of compounds containing the unique 2H-chromen-2-one motif, as it is known according to IUPAC nomenclature. Coumarin derivatives are widely found in nature, especially in plants and are constituents of several essential oils. Up to now, thousands of coumarin derivatives have been isolated from nature or produced by chemists. More recently, the coumarin platform has been widely adopted in the design of small-molecule fluorescent chemosensors because of its excellent biocompatibility, strong and stable fluorescence emission, and good structural flexibility. This scaffold has found wide applications in the development of fluorescent chemosensors in the fields of molecular recognition, molecular imaging, bioorganic chemistry, analytical chemistry, materials chemistry, as well as in the biology and medical science communities. This review focuses on the important progress of coumarin-based small-molecule fluorescent chemosensors during the period of 2012-2018. This comprehensive and critical review may facilitate the development of more powerful fluorescent chemosensors for broad and exciting applications in the future.

Fluorescent Sensors for the Detection of Heavy Metal Ions in Aqueous Media

Due to the risks that water contamination implies for human health and environmental protection, monitoring the quality of water is a major concern of the present era. Therefore, in recent years several efforts have been dedicated to the development of fast, sensitive, and selective sensors for the detection of heavy metal ions. In particular, fluorescent sensors have gained in popularity due to their interesting features, such as high specificity, sensitivity, and reversibility. Thus, this review is devoted to the recent advances in fluorescent sensors for the monitoring of these contaminants, and special focus is placed on those devices based on fluorescent aptasensors, quantum dots, and organic dyes.