An Acid-Inert Fluorescent Probe for the Detection of Nitrite

Carbon quantum dots for fluorescent detection of nitrite: A review

NO₂^- is commonly found in foods and the environment, and excessive intake of NO₂^- poses serious hazards to human health. Thus, rapid and accurate assay of NO₂^- is of considerable significance. Traditional instrumental approaches for detection of NO₂^- faced with limitations of expensive instruments and complicated operations. Current gold standards for sensing NO₂^- are Griess assay and 2,3-diaminonaphthalene assay, which suffer from slow detection kinetics and bad water solubility. The newly emerged carbon quantum dots (CQDs) exhibit integrated merits including easy fabrication, low-cost, high quantum yield, excellent photostability, tunable emission behavior, good water solubility and low toxicity, which make CQDs be widely applied to fluorescent assay of NO₂^-. In this review, synthetic strategies of CQDs are briefly presented. Advances of CQDs for fluorescent detection of NO₂^- are systematically highlighted. Lastly, the challenges and perspectives in the field are discussed.

A novel ratiometric and colorimetric probe for rapid and ultrasensitive detection of nitrite in water based on an Acenaphtho[1,2-d] imidazole derivative

The concentration of nitrite (NO₂^-) ions above allowable limits in water resources and food stuffs is considered hazardous and has been proven to be of great threat to the environment and public health. In this work, an acenaphtho [1,2-d] imidazole derivative (1) as a ratiometric colorimetric probe is developed. UV-Vis experiments demonstrate that the probe 1 shows excellent selectivity toward NO₂^- in the presence of other potential interfering species, a rapid response (20 s) and a low detection limit (100 nM) by a distinct visual color change with a bathochromic shift of 120 nm from colorless to intense yellow. Besides, this probe is further used for the quantification of nitrite ions in environmental water resources such as tap water, underground water, and surface water samples. The high recoveries (96-99% with relative standard deviations (RSD) of <2.0%) make the probe 1 a promising candidate for practical applications in daily life in the detection of nitrite ions.

Highly sensitive colorimetric determination of nitrite based on the selective etching of concave gold nanocubes

Concave gold nanocubes are viable optical nanoprobes for the determination of nitrite ions. Herein, a novel approach was developed, based on the measurement of localized surface plasmon resonance absorption. The addition of nitrite ions selectively induced the etching of concave gold nanocubes, abrading the sharp vertices to spherical corners, which resulted in blue-shifted absorption accompanied by a color change from sapphire blue to light violet. The mechanism of selective etching of concave gold nanocube tips was elucidated by using X-ray photoelectron spectroscopy and atom probe tomography. The optimized detection of NO₂^- via the concave gold nanocube-based probe occurred at pH 3.0 and in 20 mM NaCl concentration at 40 °C. The absorption ratios (A_{550 nm}/A_{640 nm}) were proportional to the NO₂^- concentrations in the range 0.0-30 μM, with a detection limit of 38 nM (limit of quantitation of 0.12 μM and precision of 2.7%) in tap water. The highly selective and sensitive colorimetric assay has been successfully applied to monitor the nitrite ion concentrations in spiked tap water, pond water, commercial ham, and sausage samples.

A facile dual-function fluorescent probe for detection of phosgene and nitrite and its applications in portable chemosensor analysis and food analysis

Due to the potential threats of phosgene and nitrite to public health and safety, in this work, we first proposed the application of a facile dual-function fluorescent probe 2-(1H-Benzimidazol-2-yl)Aniline (BMA) for the detection of phosgene and nitrite in different solvent environments. BMA had fast response (1 min), high selectivity and sensitivity (the limit of detection was 1.27 nM) to phosgene in CH₃CN solution (containing 10% DMSO), which manifested as a ratiometric fluorescent mode from 416 nm to 480 nm. The response of BMA to nitrite in HCl solution (pH = 1, containing 10% CH₃CN) was also highly selective and sensitive (the limit of detection was 60.63 nM), which shown as a turn-off fluorescent mode at 485 nm. In addition, two portable chemosensors (BMA-loaded TLC plates and test strips) had also been successfully manufactured for the detection of phosgene in the gas phase and nitrite in solution, which displayed good responses. Most importantly, BMA had also been successfully used for detection of nitrite in food samples, and a good recovery (88.5%-107.2%) was obtained by adding standard sodium nitrite.

A novel near-infrared fluorescent sensor for zero background nitrite detection via the "covalent-assembly" principle

Different chemical states of nitrogen are present in many freshwater and marine ecosystems, and nitrite ions are one of the most toxic water-soluble nitrogen species. Developing an effective and convenient sensing method to constantly detect the concentration of nitrite has become a wide concern. Here, a novel near-infrared fluorescent probe (AAC) was designed and synthesized via the "covalent assembly" principle, showing excellent selectivity and high sensitivity for nitrite. A new nitrite-quantitative method was established with the help of AAC, and the detection limit of nitrite using the new method was as low as 6.7 nM. AAC was successfully applied for the quantitative detection of nitrite in real-world environmental and food samples (including river water and Chinese sauerkraut), and the detection results were essentially identical to the results obtained from the traditional Griess assay. Moreover, AAC was successfully applied for tracking nitrite in Escherichia coli by fluorescence imaging. Since nitrite can have devastating effects, the method established with AAC allowed us to "see" effectively about the water quality, food quality, etc.

Intrinsically ESIPT-exhibiting and enhanced emission in polymer nanoparticles as signaling for sensing nitrite

A straightforward approach to the fabrication of intrinsically excited-state intramolecular proton transfer (ESIPT)-fluorescent polymer nanoparticles (e-PNPs) was developed. The e-PNPs were obtained by self-assembly of the homopolymers derived from 4-aminosalicylic acid in aqueous solution. By incorporating ESIPT modules into polymer nanoparticles, the ESIPT reaction can be endowed with moderate hydrophobic micro-environment by nanoparticle scaffolds, eliciting enhanced ESIPT emission. The newly developed e-PNPs exhibit strong tautomeric fluorescence(e-FL), good photostability, low-toxicity and favourable biocompatibility in aqueous solution. Upon the addition of NO₂^-, the e-FL can be significantly quenched owing to the reaction of NO₂^- with the amide groups on e-PNPs. From this basis, the fluorescence detection of NO₂^- was implemented, which showed a linear relationship between 0 nM and 110 nM with a detection limit of 2.3 nM. Furthermore, e-PNPs were used as nanoprobes to monitor the NO₂^- levels in HeLa cells by fluorescence imaging, demonstrating the ability of discrimination from different concentrations of NO₂^-. The proposed method can be applied to a wide range of other ESIPT modules to integrate into polymer nanoparticles and offer highly sensitive nanosensing platform for bioanalysis and molecular imaging.

Orange-emitting N-doped carbon dots as fluorescent and colorimetric dual-mode probes for nitrite detection and cellular imaging

Novel orange-emitting N-doped carbon dots (N-CDs) were prepared as fluorescent and colorimetric dual-mode probes for sensing nitrite (NO₂⁻).

A colorimetric fluorescent probe for rapid and specific detection of nitrite

The method of fluorescent probes has been an important technique for detection of nitrite (NO₂ ^- ). As an important inorganic salt, excessive nitrite would threaten humans and the environment. In this paper, a colorimetric fluorescent probe P-N (1,2-diaminoanthraquinone) with rapid response and high selectivity, which could detect NO₂ ^- by visual colour changes and fluorescence spectroscopy is presented. The probe P-N solution (pH 1) changed from pink to colourless with the addition of NO₂ ^- and fluorescence intensity at 639 nm clearly decreased. Good linear exists between fluorescence intensities and NO₂ ^- concentrations for the range 0-16 μM, and the detection limit was 54 nM (based on a 3σ/slope). Moreover, probe P-N could also detect NO₂ ^- in real water samples, and results were all satisfactory. Probe P-N shows great practical application value for detecting NO₂ ^- in the environment.

A colorimetric and fluorescent lighting-up sensor based on ICT coupled with PET for rapid, specific and sensitive detection of nitrite in food

A colorimetric and fluorogenic sensor exhibiting rapid, specific and sensitive detection of potentially toxic nitrite in food is described.

Detection of nitrite with a surface-enhanced Raman scattering sensor based on silver nanopyramid array

Nutrient pollution is of worldwide environmental and health concerns due to extensive use of nitrogen fertilizers and release of livestock waste, which induces nitrite compounds in aquatic systems. Herein a surface-enhanced Raman scattering (SERS) sensor is developed for nitrite detection based on coupling between the plasmonic gold nanostars and the silver nanopyramid array. When nitrite is present in the assay, an azo group is formed between the 1-naphthylamine-functionalized silver nanopyramids and the 4-aminothiophenol-functionalized gold nanostars. This not only generates the SERS spectral fingerprint for selective detection, but also creates "hot spots" at the gap between the Au nanostars and the Ag nanopyramids where the azo group is located, amplifying SERS signals remarkably. Finite-difference time-domain (FDTD) simulation shows a SERS enhancement factor of 4 × 10¹⁰ at the "hot spots". As a result, the SERS sensor achieves a limit of detection of 0.6 pg/mL toward nitrite in water, and enables nitrite detection in real-world river water samples. In addition, this sensor eliminates the use of any Raman reporter and any expensive molecular recognition probe such as antibody and aptamer. This highly sensitive, selective and inexpensive SERS sensor has unique advantages over colorimetric, electrochemical and fluorescent devices for small molecule detection.