Determination of Zinc Ion by a Quinoline-Based Fluorescence Chemosensor

Tri-armed Schiff base fluorescent sensor for the rapid recognition of Zn(II): application in live cell imaging, test strips and TLC

Various metal ions exist in nature and human beings and play limitless vital roles in both the atmosphere and biology. A fundamental and useful aspect is the qualitative and quantitative assessment of Zn(II) at concentration levels as low as parts per billion (ppb). Thus, the design and development of novel fluorescent turn-on receptors have gained significant interest because of their potential for use in live cell imaging to detect biologically relevant metal ions with high selectivity and sensitivity. The present research illustrates the design and synthesis of a novel fluorescent sensor [(1,3,5-triazine-2,4,6-triyl)tris(hydrazine-2-yl-1-ylidene)tris(methaneylylidene)]tris(2,4-di-tert-butylphenol) (THDBP) for the selective and sensitive probing of Zn(II). The sensor exhibited a fluorescence turn-on mechanism upon treatment with Zn(II) ions at λemi. 503 nm in aq. acetonitrile. The formation of a 1 : 3 complex between THDBP and Zn(II) is confirmed from the Job plot and ESI-MS spectrum. The evaluated limit of detection (LOD) and association constant (Ka) of the sensor THDBP for Zn(II) were found to be 1.03 × 10-10 M and 2.33 × 108 M-1, respectively. Further research demonstrates the practical application of the sensor for the detection of Zn(II) ions in live cells. The sensing ability of the sensor THDBP was also explored through inexpensive test strips and TLC sheets.

Active Hydrogen Free, Z-Isomer Selective Isatin Derived "Turn on" Fluorescent Dual Anions Sensor

An efficient and anions fluorescence "on-off" sensor of 1-(prop-2-yn-1-yl)-3-(quinolin-3-ylimino)indolin-2-one (PQI) has been developed for the selective sensing of dual anions of F- and NO3- ions in aqueous medium. Active hydrogen and Lewis acidic binding sites free, Z- isomer of isatin based π-conjugated quinoline exhibited excellent sensing activity against F- and NO3- ions in UV light. The fluorescence turns on the process accomplished via the PET "on-off" mechanism. The interaction between probe molecule and anions is thought to be a non-covalent interaction of the low electron density covalently bonded N-methylene moiety of propargyl isatin (-N-CH2-) of probe molecule with F- ion and the terminal acidic proton of propargyl group of isatin (-C≡C-H) with NO3- ions. The modes of anions binding with PQI and plausible mechanisms are proposed by 1H and 13C NMR titrations. The selectivity of anions sensing may be offered by the bucked structure of the Z-isomer. The calculated association constant values for PQI and F- and NO3- are ions 2.5 × 104 M-1 and 2.2 × 103 M-1, respectively, indicating strong binding interaction between the PQI and anions. The association nature of anions and probes was analyzed by a Jobs plot and the finding indicates both F- and NO3- ions are in 1:1 complexation with PQI. The limit of detection (LOD) of the probe with F- and NO3- ions is calculated and is to be 6.91 × 10-7 M and 9.93 × 10-7 M, respectively. The proposed PQI fluorophore possesses a low limit of detection (LOD) for both F- and NO3- ions which is within the WHO prescribed detection limit.

Luminous Insights: Exploring Organic Fluorescent "Turn-On" Chemosensors for Metal-Ion (Cu+2, Al+3, Zn+2, Fe+3) Detection

There are several metal ions that are vital for the growth of the environmental field as well as for the biological field but only up to the maximum limit. If they are present in excess, it could be hazardous for the human health. With the growing technology, a series of various detection techniques are employed in order to recognize those metal ions, some of them include voltammetry, electrochemical methods, inductively couples, etc. However, these techniques are expensive, time consuming, requires large storage, advanced instrumentation, and a skilled person to operate. So, here comes the need of a sensor and it is defined as a miniature device which detects the substance of interest by giving response in the form of energy change. So, from past few decades, many sensors have been formulated for detecting metal ions with some basic characteristics like selectivity, specificity, sensitivity, high accuracy, lower detection limit, and response time. Detecting various metal ions by employing chemosensors involves different techniques such as fluorescence, phosphorescence, chemiluminescence, electrochemical, and colorimetry. The fluorescence technique has certain advantages over the other techniques. This review mainly focuses on the chemosensors that show a signal in the form of fluorescence to detect Al+3, Zn+2, Cu+2, and Fe+3 ions.

Recent Advances in Fluorescent Probes for Zinc Ions Based on Various Response Mechanisms

Zinc is a vital metal element with extensive applications in various fields such as industry, metallurgy, agriculture, food, and healthcare. For living organisms, zinc ions are indispensable, and their deficiency can lead to physiological and metabolic abnormalities that cause multiple diseases. Hence, there is a significant need for selective recognition and effective detection of free zinc ions. As a probe method with high sensitivity, high selectivity, real-time monitoring, safety, harmlessness and ease of operation, fluorescent probes have been widely used in metal ion identification studies, and many convenient, low-cost and easy-to-operate fluorescent probes for Zn²⁺ detection have been developed. This article reviews the latest research advances in fluorescent chemosensors for Zn²⁺ detection from 2019 to 2023. In particular, sensors working through photo-induced electron transfer (PET), excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), chelation-enhanced fluorescence (CHEF), and aggregation-induced emission (AIE) mechanisms are described. We discuss the use of various recognition mechanisms in detecting zinc ions through specific cases, some of which have been validated through theoretical calculations.

Coordination of Distal Carboxylate Anion Alters Metal Ion Specific Binding in Imidazo[1,2-a]pyridine Congeners

Imidazo[1,2-a]pyridine derivatives have excellent potential for chelation with transition metal ions. Two new imidazo[1,2-a]pyridine-8-carboxylates were synthesized and characterized by ¹H NMR, ¹³C NMR, HRMS, and single crystal-XRD techniques. Methyl carboxylate (probe 1) turns on fluorescence upon coordination with Zn²⁺, while sodium carboxylate (probe 2) turns off its fluorescence upon coordination with Co²⁺ or Cu²⁺ ions present in aqueous acetonitrile medium. ¹³C NMR study revealed that the change in metal ion specific binding was due to the involvement of carboxylate anion in complex formation with Co²⁺ or Cu²⁺ ions. The carboxylate anion at 8-position also enhanced the sensitivity of detection of probe 2 by an order of magnitude (detection limits: 3.804 × 10^-7 M, probe 1/Zn²⁺; 0.420 × 10^-7 M, probe 2/Co²⁺ and 0.304 × 10^-7 M, probe 2/Cu²⁺). The detection limits of probes 1 and 2 comply well with the World Health Organization (WHO) and US Environmental Protection Agency (US-EPA) guidelines for detection of heavy metal ions present in drinking water and ground water. Both the probes form a 1:1 complex with Zn²⁺, Co²⁺ or Cu²⁺, and the stoichiometry was verified by Job plot and ESI-mass analysis. The sensing mechanism is explained using ¹³C NMR experiments, ESI-mass analytical data and theoretical DFT calculations. The suitability of probes 1 and 2 for on-site detection and quantitative determination of Zn²⁺, Co²⁺ and Cu²⁺ ions present in biological, environmental and industrial samples is demonstrated. In addition, both 1 and 2 are used for detection of intracellular contamination of Zn²⁺, Co²⁺ or Cu²⁺ ions in onion epidermal cells.

Synthesis and Discovery of Schiff Base Bearing Furopyrimidinone for Selective Recognition of Zn2+ and its Applications in Cell Imaging and Detection of Cu2

A simplefuro [2,3-d]pyrimidinone-based Schiff base FPS was synthesized via aza-Wittig reaction and structure elucidation was carried out by spectroscopic studies FT-IR, 1H NMR, and 13C NMR and mass spectrometry. FPS showed weak fluorescence emission in methanol and the selectivity of FPS to different metal ions (Mn²⁺, Ca²⁺, Fe²⁺, Fe³⁺, Mg²⁺, Al³⁺, Ba²⁺, Ag⁺, Co²⁺, Na⁺, K⁺, Cu²⁺, Zn²⁺, Pb²⁺, Bi³⁺) were studied by absorption and fluorescence titration. The results show that FPS has selective fluorescence sensing behavior for Zn²⁺ ions and the limit of detection (LOD) was calculated to be 1.19 × 10^–8 mol/L. Moreover, FPS-Zn²⁺ acts as a metal based highly selective and sensitive new chemosensor for Cu²⁺ ions and the LOD was calculated to be 2.25 × 10^–7 mol/L. In accordance with the results and theoretical calculations, we suspected that the binding mechanisms of FPS to Zn²⁺ and Cu²⁺ were assigned to be the cooperative interaction of Zn²⁺(Cu²⁺)-N.

A Fluorescence Sensor Array Based on Zinc(II)-Carboxyamidoquinolines: Toward Quantitative Detection of ATP*

The newly prepared fluorescent carboxyamidoquinolines (1-3) and their Zn(II) complexes (Zn@1-Zn@3) were used to bind and sense various phosphate anions utilizing a relay mechanism, in which the Zn(II) ion migrates from the Zn@1-Zn@3 complexes to the phosphate, namely adenosine 5'-triphosphate (ATP) and pyrophosphate (PPi), a process accompanied by a dramatic change in fluorescence. Zn@1-Zn@3 assemblies interact with adenine nucleotide phosphates while displaying an analyte-specific response. This process was investigated using UV-vis, fluorescence, and NMR spectroscopy. It is shown that the different binding selectivity and the corresponding fluorescence response enable differentiation of adenosine 5'-triphosphate (ATP), adenosine 5'-diphosphate (ADP), pyrophosphate (PPi), and phosphate (Pi). The cross-reactive nature of the carboxyamidoquinolines-Zn(II) sensors in conjunction with linear discriminant analysis (LDA) was utilized in a simple fluorescence chemosensor array that allows for the identification of ATP, ADP, PPi, and Pi from 8 other anions including adenosine 5'-monophosphate (AMP) with 100 % correct classification. Furthermore, the support vector machine algorithm, a machine learning method, allowed for highly accurate quantitation of ATP in the range of 5-100 μM concentration in unknown samples with error <2.5 %.

Zn2+ detection of a benzimidazole 8-aminoquinoline fluorescent sensor by inhibited tautomerization

The sensor shows a high selectivity and sensitivity toward zinc cations, accompanied by a distinct green fluorescence emission.

Synthesis, Crystal Structures, Fluorescence and Quantum Chemical Investigations of some Multi-Substituted Quinoline Derivatives

Starting from eugenol (4-allyl-2-methoxyphenol) three new quinoline derivatives, namely 5-bromo-7-(carboxymethoxy)-6-hydroxy-1-methylquinolin-1-ium-3-sulfonate (Q2, C₁₂H₁₀BrNO₇S), 5-amino-7-(carboxymethoxy)-6-hydroxyquinolin-1-ium-3-sulfonate (Q4, C₁₁H₁₀N₂O₇S) and 7-(carboxymethoxy)-5,6-dihydroxylquinolin-1-ium-3-sulfonate (Q6, C₁₁H₉NO₈), have been synthesized and crystallised as dihydrate. The best planes through the quinoline ring and the carboxymethoxy substituent is 6.60 (14), 7.28 (6) and 4.73 (7)° for Q2, Q4 and Q6, respectively. The crystal packing of Q2 is characterised by O-H…O, π …π and Br …pyridine interactions. The two water molecules bridge three sulphate groups. Infinite chains of Q4 running in the direction [021] are formed by O/N-H …O hydrogen bonds at both ends of the molecule. Parallel chains interact by O/N-H…O hydrogen bonds and π…π and C=O…phenyl stacking. The -NH₂ substituent bridges two sulphate groups, while the two water molecules bridge the other functional groups. The packing of Q6 consists of sheets of molecules interaction through O/N-H…O hydrogen bonds while the two water molecules bridge all function groups present. Parallel sheets interact through π…π and C=O…pyridine stacking. An aqueous solution of Q2 and its precursor 7-(carboxymethoxy)-6-hydroxyquinolin-1-ium-3-sulfonate (Q) exhibits fluorescence which is pH dependent. The fluorescence intensity of a 10 μM solution of Q containing Zn²⁺ reaches its maximum for a [Zn²⁺]:[Q] ratio of 1:1. The fluorescence properties of Q, Q2, Q4 and Q6 were further investigated by DFT calculation methods.

A Simple Isoniazid-Based N-Acylhydrazone Derivative as Potential Fluorogenic Probe for Zn2+ Ions

This study evaluated three isoniazid-based N-acylhydrazone derivatives (HL1, HL2, and HL3) varying their substituting groups (-H, -N(CH₃)₂, and -NO₂) as potential chemosensors for Zn²⁺ ions. To this end, the absorption and emission properties of these derivatives were investigated in the presence of Zn²⁺ ions. Results point to the derivative HL2 as the best chemosensor for Zn²⁺ ions because of its comparatively higher sensitivity. The color of this derivative changed from colorless to strong yellow with zinc addition, as indicated by the shift in UV-vis spectrum. Moreover, HL2 was the only derivative to emit fluorescence in the presence of Zn²⁺ ions, attributable to PET inhibition and bond isomerization promoted by coordination with this metal. LOD, LOQ, and binding constant values for HL2 + Zn²⁺ were 0.43 μmol.l^-1, 0.93 μmol.l^-1, and 5.04 × 10¹² l.mol^-1, respectively. The fluorescence of HL2 with other metal ions (Fe³⁺, Mg²⁺, Na⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Ca²⁺, and K⁺) was also investigated. Zn²⁺ yielded the best result without Cd²⁺ interferences. Job's Plot showed that the stoichiometric ratio of the complex formed by HL2 and Zn²⁺ ions is 2:1 (ligand:metal). The strip test with adsorbed HL2 indicated fluorescence in the presence of zinc ions under 365 nm UV irradiation.

Developing a new chemosensor targeting zinc ion based on two types of quinoline platform

A chemosensor DQ (2-(2-(quinolin-2-yl)hydrazinyl)-N-(quinolin-8-yl)acetamide), based on two quinoline moieties, has been synthesized. DQ could detect zinc ion through fluorescence turn-on in aqueous media. Limit of detection was calculated as 0.07 μM, far lower than the standard of WHO for zinc ion. The practicality of DQ was demonstrated via the successful results of reusability with EDTA, easy detection on the test strip, and precise quantification in real water samples. Additionally, sensor DQ could be applied to bioimaging of zinc ion in zebrafish. Sensing process of zinc ion by DQ was studied through fluorescence and UV-Vis spectroscopy, ¹H NMR titration, and ESI-mass spectrometry.