Influence of Fe(III) on the Fluorescence of Lysozyme: a Facile and Direct Method for Sensitive and Selective Sensing of Fe(III)

Hydrothermal Synthesis of Functionalized Carbon Nanodots and Their Clusters as Ionic Probe for High Sensitivity and Selectivity for Sulfate Anions with Excellent Detection Level

Nitrogen-doped carbon nanodots (CNDs) were synthesized and utilized as sensing probes to detect different anions and metallic ions within aqueous solutions. The pristine CNDs were developed through a one-pot hydrothermal synthesis. o-Phenylenediamine was used as the precursor. A similar hydrothermal synthesis technique in the presence of polyethylene glycol (PEG) was adopted to form the PEG-coated CND clusters (CND-100k). Through photoluminescence (PL) quenching, both CND and PEG-coated CND suspensions display ultra-high sensitivity and selectivity towards HSO₄^- anions (Stern-Volmer quenching constant (K_SV) value: 0.021 ppm^-1 for CND and 0.062 ppm^-1 for CND-100k) with an ultra-low detection limit (LOD value: 0.57 ppm for the CND and 0.19 ppm for CND-100k) in the liquid phase. The quenching mechanism of N-doped CNDs towards HSO₄^- ions involves forming the bidentate as well as the monodentate hydrogen bonding with the sulfate anionic moieties. The detection mechanism of metallic ions analyzed through the Stern-Volmer formulation reveals that the CND suspension is well suited for the detection of Fe³⁺ (K_SV value: 0.043 ppm^-1) and Fe²⁺ (K_SV value: 0.0191 ppm^-1) ions, whereas Hg²⁺ (K_SV value: 0.078 ppm^-1) sensing can be precisely performed by the PEG-coated CND clusters. Accordingly, the CND suspensions developed in this work can be employed as high-performance PL probes for detecting various anions and metallic ions in the liquid phase.

Green Chemical Synthesis of N-Cholyl-L-Cysteine Encapsulated Gold Nanoclusters for Fluorometric Detection of Mercury Ions

Herein we report a simple, single-step, cost-effective, environmentally friendly, and biocompatible approach using sodium salt of N-cholyl-L-cysteine (NaCysC) capped gold nanoclusters (AuNCs) with green emission properties at above the CMC in aqueous medium under UV-light irradiation. The primary and secondary CMC of NaCysC was found to be 4.6 and 10.7 mM respectively using pyrene as fluorescent probe. The synthesized AuNCs exhibit strong emission maxima at 520 nm upon excitation at 375 nm with a large Stokes shift of 145 nm. The surface functionality and morphology of NCs are studied by fourier transform infrared spectroscopy, dymanic light scattering studies and transmission electron microscopy. The formation of AuNCs was completed within 5 h and exhibit high stability for more than 6 months. The NaCysC templated AuNCs selectively quenches the Hg²⁺ ions with higher sensitivity in aqueous solution over the other metal ions. The fluorescence analysis of Hg²⁺ showed a wide linear range from 15 to 120 µM and a detection limit was found to be 15 nM.

A Highly Fluorescent Pyrene-Based Sensor for Selective Detection Of Fe3+ Ion in Aqueous Medium: Computational Investigations

In this work, we introduce a highly selective and sensitive fluorescent sensor based on pyrene derivative for Fe(III) ion sensing in DMSO/water media. 2-(pyrene-2-yl)-1-(pyrene-2-ylmethyl)-1H-benzo[d]imidazole (PEBD) receptor was synthesized via simple condensation reaction and confirmed by spectroscopic techniques. The receptor exhibits fluorescence quenching in the presence of Fe(III) ions at 440 nm. ESI-MS and Job's method were used to confirm the 1:1 molar binding ratio of the receptor PEBD to Fe(III) ions. Using the Benesi-Hildebrand equation the binding constant value was determined as 8.485 × 10³ M^-1. Furthermore, the limit of detection (LOD, 3σ/K) value was found to be 1.81 µM in DMSO/water (95/5, v/v) media. According to the Environmental Protection Agency (EPA) of the United States, it is lower than the acceptable value of Fe³⁺ in drinking water (0.3 mg/L). The presence of 14 other metal ions such Co²⁺, Cr³⁺, Cu²⁺, Fe²⁺, Hg²⁺, Pb²⁺, K⁺, Ni²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Al³⁺, and Zn²⁺ did not interfere with the detection of Fe(III) ions. The fluorescence life-time of the receptor PEBD with and without Fe³⁺ ion was found to be 1.097 × 10^-9 s and 0.9202 × 10^-9 s respectively. Similarly, the quantum yield of the receptor PEBD with Fe³⁺ and without Fe³⁺ ion was calculated, and found as 0.05 and 0.25 respectively. Computational studies of the receptor PEBD were carried out with density functional theory (DFT) using B3LYP/ 6-311G (d, p), LANL2DZ level of theory.

Boron doped Fluorescent Carbon Nano Dots for reduction of ionic dyes and as Encryption and decryption QR code labels

This work discusses the synthesis of fluorescent undoped and boron-doped carbon nanodots (BDCNDs) by a simple hydrothermal approach using Tribulus terretris as carbon precursor and boric acid as boron source....