Ultra-Sensitive Fluorimetric Method for the First Estimation of Vonoprazan in Real Human Plasma and Content Uniformity Test

Sodium salicylate as a green fluorescent probe for ultrasensitive determination of vonoprazan fumarate via fluorescence switch off strategy; greenness assessment

A green, simple and sensitive spectrofluorometric approach for determining vonoprazan fumarate in bulk and pharmaceutical dosage form by turning off the fluorescence of sodium salicylate is developed. The addition of vonoprazan fumarate reduced linearly the fluorescence intensity of 0.4 mM sodium salicylate at λem 408 nm and at λex 330 nm. The approach was found to be linear in the 50.0-3000.0 ng/mL range. The limits of detection and quantification were 10.97 and 33.23 ng/mL, respectively. The presented method proved its suitability in determination of vonoprazan fumarate in its pure and pharmaceutical dosage form. This method employs water as the exclusive solvent and utilizes safe reagents, evaluated using the Analytical Eco Scale, Green Analytical Procedure Index (GAPI), and carbon footprint. In contrast, previous methods relied on toxic reagents and required extended heating times, resulting in higher environmental impact. The novel method not only enhances analytical efficiency but also aligns with green chemistry principles, offering a sustainable solution for routine pharmaceutical analysis.

Fluorimetric determination of Vonoprazan via quenching of nitrogen and sulfur co-doped carbon quantum dots: A rapid and sustainable analytical approach

In this study, an environmentally sustainable fluorimetric method for determination of Vonoprazan fumarate (VON) in dosage forms using nanoprobes consisting of nitrogen and sulfur co-doped carbon quantum dots (N, S-CQDs). The N, S-CQDs were prepared through a microwave-assisted method in 30 s. The resulting N, S-CQDs were characterized using transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). They exhibit fluorescence emission at 460 nm after excitation at 385 nm with a high quantum yield (60%). The analytical approach for VON determination relies on the quenching effect exerted by VON on the native fluorescence intensity of CQDs. The quenching mechanism was investigated using Stern-Volmer plots. The proposed method demonstrates linearity across a concentration range 10-80 μM (4.6-36.8 μg/mL) with corresponding limits of detection and quantitation calculated as 2.17 μM (0.99 μg/mL) and 6.58 μM (3.02 μg/mL), respectively. The method has been effectively utilized for the determination of VON in the pharmaceutical samples. Statistical comparison with reported RP-HPLC has been performed to verify the accuracy and precision of the developed method. The environmental sustainability of the developed method has been thoroughly examined through various greenness metrics.

Development of fluorescence probe for spectrofluorimetric determination of viloxazine hydrochloride in pharmaceutical form and rat plasma; additional pharmacokinetic study

Attention deficit hyperactivity disorder (ADHD) is a neurological condition frequently identified in early childhood and frequently co-occurs with other neuropsychological disorders, particularly autism. Viloxazine hydrochloride, a non-stimulant medication, has recently gained approval for treating attention-deficit hyperactivity disorder. This paper describes the first spectrofluorimetric method for precisely measuring the content of viloxazine in pharmaceutical capsules and rat plasma. This method employed NBD-Cl (4-chloro-7-nitrobenzo-2-oxa-1,3-diazole) as a fluorescent probe, which transformed viloxazine in an alkaline environment into a remarkably sensitive fluorescent adduct. Upon excitation at 476 nm, this adduct becomes detectable at a wavelength of 536 nm. The method was validated using ICH criteria, revealing acceptable linearity across a concentration range of 200-2000 ng/ml and high sensitivity with LOD and LOQ values of 46.774 ng/ml and 141.741 ng/ml, respectively. This method was adeptly applied in a pharmacokinetic study of viloxazine in rat plasma following a single oral dose (10 mg/kg), yielding a mean peak plasma concentration (Cmax) of 1721 ng/ml, achieved within 1.5 h. Furthermore, the environmental impact of the technique was assessed using two greenness assessment tools, revealing a notable level of eco-friendliness and sustainability.

Validated chromatographic approach for determination of two ternary mixtures in newly approved formulations for helicobacter pylori eradication: assessment of greenness profile and content uniformity

A new, sensitive, and rapid isocratic reversed phase chromatographic method (RP-HPLC-UV) was developed for simultaneous separation of two newly co-formulated antiulcer mixtures; Amoxicillin, Vonoprazan and Clarithromycin [Mixture (I)], and Amoxicillin, Lansoprazole and Clarithromycin [Mixture (II)]. Analytical separation was performed using a Promosil C18 column and ultraviolet detection at 210 nm. The separation was achieved within only 8 min. For both mixtures, an aqueous solution, composed of (Acetonitrile: Methanol: 0. 2 M phosphoric acid) within ratio of (30: 30: 40) adjusted to final pH 3.0, was the mobile phase. This method was validated as per the International Conference on Harmonization guidelines. The linearity ranges of these proposed method of the (Mixture (I)) were 25.0-400.0 µg/mL Amoxicillin, 0.5-8.0 µg/mL Vonoprazan, and 12.5-200.0 µg/mL Clarithromycin. And the linearity ranges of the (Mixture (II)) were 10.0-300.0 µg/mL Amoxicillin, 0.3-9.0 µg/mL Lansoprazole and 5.0-150.0 µg/mL Clarithromycin. This method was firstly applied for effective separation of Amoxicillin, Vonoprazan and Clarithromycin [Mixture (I)]. It fulfilled good repeatability, sensitivity, and accuracy (R.S.D. < 2.0%). The mean recoveries of the analytes in their Tri-Pak formulations were acceptable. The greenness of the developed chromatographic methods was assessed using an Eco-scale method and it was applied for content uniformity testing as per the United States Pharmacopoeia (USP) and the acceptance value of Amoxicillin, in Mixture (I) was 2.88, the acceptance values for Amoxicillin, Lansoprazole in Mixture (II) were 2.592, 2.424, respectively.

LC-MS/MS method for quick detection of vonoprazan fumarate in human plasma: Development, validation and its application to a bioequivalence study

A liquid chromatography-tandem mass spectrometry method with vonoprazan fumarate-d4 as a stable isotope-labeled internal standard was developed and validated aiming at quantification of vonoprazan fumarate in human plasma for a bioequivalence study. Chromatographic separation was achieved by acetonitrile one-step protein precipitation using a gradient elution of 0.1% formic acid aqueous solution and acetonitrile with a run time of 3.65 min. Detection was carried out on a tandem mass spectrometer in multiple reaction monitoring mode via a positive electrospray ionization interface. The multiple reaction monitoring mode of precursor-product ion transitions for vonoprazan fumarate and vonoprazan fumarate-d4 were m/z 346.0 → 315.1 and 350.0 → 316.0, respectively. The linear range was 0.150-60.000 ng/ml. This method was fully validated with acceptable results in terms of selectivity, carryover, lower limit of quantification, calibration curve, accuracy, precision, dilution effect, matrix effect, stability, recovery and incurred sample reanalysis. A successful application of this method was realized in the bioequivalence study of vonoprazan fumarate tablet (20 mg) among healthy Chinese volunteers.

A comparative analysis of univariate versus multivariate eco-friendly spectrophotometric manipulations for resolving severely overlapped spectra of vonoprazan and amoxicillin new combination

Vonoprazan and amoxicillin are pharmacological combinations that demonstrate synergistic effects in treating Helicobacter pylori (H. pylori), a global public health concern associated with peptic ulcer disease and gastric cancer. Four spectrophotometric methods were developed, including two univariate techniques (Fourier self-deconvolution and ratio difference) and two multivariate chemometric approaches (partial least squares and principal component regression). These methods provide innovative solutions for effectively resolving and accurately quantifying the overlapping spectra of vonoprazan and amoxicillin. The concentration ranges covered were 3-60 μg ml-1 for vonoprazan and 5-140 μg ml-1 for amoxicillin. To assess the environmental sustainability of the methodologies, various measures such as the Green Analytical Procedure Index (GAPI), National Environmental Method Index (NEMI), Analytical GREEnness Calculator, and Analytical Eco-scale, as well as RGB12 and hexagon toll were implemented. The validation of the developed techniques was carried out in compliance with ICH standards. The present study is highly significant because it is the first time that the mixture has been determined using the current approaches. The comparative analysis demonstrated no significant difference in terms of accuracy and precision compared to reference HPLC method (p = 0.05). The established spectrophotometric methods offer a straightforward, rapid, and cost-effective alternative to complex analytical techniques for determining the vonoprazan and amoxicillin mixture. They show potential for routine analysis in research laboratories and pharmaceutical industries.

An eco-friendly liquid chromatographic analysis of the triple therapy protocol of amoxicillin, metronidazole and vonoprazan for H. Pylori eradication: application to combined dosage forms and simulated gastric fluid

Helicobacter pylori has a big sway when peptic ulcers are concerned. For its eradication, different protocols have been approved. Among which, the tripartite therapy protocol which embraces vonoprazan as potassium competitive acid blocker in combination with amoxicillin and metronidazole as antibiotics. An environmentally benign HPLC method is addressed in order to simultaneously determine amoxicillin (AMX), metronidazole (MET) and vonoprazan (VPZ) in bulk powder and combined tablet mixture. Full separation of AMX, MET and VPZ is accomplished using C8 column, and a gradient mobile phase system, composed of methanol and phosphate buffer of a pH value of 5. Fine linearity in the concentration ranges 50-600 µg mL-1 amoxicillin, 50-400 µg mL-1 metronidazole and 10-100 µg mL-1 vonoprazan was denoted by the high correlation coefficient (0.9999). The method accuracy and precision are confirmed upon analyzing AMX, MET and VPZ triple therapy not only in their synthetic mixtures and combined tablet mixtures but also in their combined tablet mixtures in simulated gastric fluid. AMX, MET and VPZ triple therapy could be routinely analyzed in QC labs, in case of being co-formulated, using the presented method. Three different assessment tools were adopted revealing the benign environmental impact of presented method.

An Innovative Selective Fluorescence Sensor for Quantification of Hazardous Food Colorant Allura Red in Beverages Using Nitrogen-Doped Carbon Quantum Dots

An innovative simple, sensitive, and selective method has been developed and validated for quantification of hazardous Allura red (AR, E129) dye in beverages. Allura red (AR) is a synthetic dye that is commonly used in the food industry to give foods a bright and appealing color. The method is based on microwave-assistant nitrogen-doped carbon quantum dots (N@CQDs) from a very cheap source with a high quantum yield equal to (36.60%). The mechanism of the reaction is based on an ion-pair association complex between AR and nitrogen-doped carbon quantum dots (N@CQDs) at pH 3.2. The reaction between AR and N@CQDs led to a quenching effect of the fluorescence intensity of N@CQDs at 445 nm after excitation at 350 nm. Moreover, the quantum method's linearity covered the range between 0.07 and 10.0 µg mL- 1 with a regression coefficient is 0.9992. The presented work has been validated by ICH criteria. High-resolution transmission electron microscopy (HR-TEM), X-ray photon spectroscopy (XPS), Zeta potential measurements, fluorescence, UV-VIS, and FTIR spectroscopy have all been used to fully characterize of the N@CQDs. The N@CQDs were successfully utilized in different applications (beverages) with high accuracy.

Applicability of fluorescamine as a fluorogenic reagent for highly sensitive fluorimetric analysis of the tyrosine kinase inhibitor (avapritinib) in pharmaceuticals and biological samples

Avapritinib (AVP) was the first precision drug to be approved by the US Food and Drug Administration (FDA) in 2020 for patients suffering from metastatic gastrointestinal stromal tumors (GISTs) and progressive systemic mastocytosis. The analysis of AVP in pharmaceutical tablets and human plasma was then carried out using a fast, efficient, sensitive, and simple fluorimetric method using a fluorescamine reagent. The procedure is based on the interaction between fluorescamine as a fluorogenic reagent and the primary aliphatic amine moiety in AVP using borate buffer solution at pH 8.8. The produced fluorescence was measured at 465 nm (Excitation at 395 nm). The calibration graph's linearity range was discovered to be 45.00-500.0 ng mL-1 . Utilizing the International Council for Harmonization (ICH) and US-FDA recommendations, the research technique was validated and bioanalytically validated. The proposed approach was effectively employed for determining the stated pharmaceuticals in plasma with a high percentage of recovery ranging from 96.87 to 98.09 and pharmaceutical formulations with a percentage of recovery equal to 102.11% ± 1.05%. In addition, the study was extended to a pharmacokinetic study of AVP with 20 human volunteers as a step for AVP management in therapeutic cancer centers.

Green microwave quantum dots as luminescent probes for quantifying prucalopride: consistency of content and application to pharmacokinetic studies

Prucalopride (PCP) is a medication used for the management of constipation via regulating bowel motions. PCP is widely used all over the world. So, novel, rapid, and highly sensitive carbon dots N-CQDs were obtained from Eruca Sativa juice via microwave approach in 4 min. The luminescence power of N-CQDs was declined by the increasing prucalopride concentration at emission 518 nm with linearity ranged from 3.00 to 200.00 ng mL^-1. The luminescent antecedent was utilized for the test of PCP in human plasma with the rate of recovery extending from 95.06 to 98.40%. The new technique is an eco-friendly analytical method that can be easily applied in clinical laboratories. This assay is also simple, sensitive, and applied to therapeutic laboratories and subsequent pharmacokinetic studies in several clinical laboratories. Furthermore, the N-CQDs nano-sensor was able to distinguish the target drug from interferents commonly found in human plasma, indicating its high specificity and selectivity for PCP detection.

Rapid One-Pot Microwave Assisted Green Synthesis Nitrogen Doped Carbon Quantum Dots as Fluorescent Precursor for Estimation of Modafinil as Post-Covid Neurological Drug in Human Plasma with Greenness Assessments

The neuro-stimulant anti-narcoleptic drug as modafinil (MOD) is used to treatment neurological conditions caused by COVID-19. MOD was used to treatment narcolepsy, shift-work sleep disorder, and obstructive sleep apnea-related sleepiness. So, an innovative, quick, economical, selective, and ecologically friendly procedure was carried out. A highly sensitive N@CQDs technique was created from green Eruca sativa leaves in about 4 min using microwave synthesis at 700 w. The quantum yield of the synthesized N@CQDs was found to be 41.39%. By increasing the concentration of MOD, the quantum dots' fluorescence intensity was gradually quenched. After being excited at 445 nm, the fluorescence reading was recorded at 515 nm. The linear range was found to be in the range 50 - 700 ng mL^-1 with lower limit of quantitation (LOQ) equal to 45.00 ng mL^-1. The current method was fully validated and bio analytically according to (US-FDA and ICH) guidelines. Full characterization of the N@CQDs has been conducted by high resolution transmission electron microscope (HRTEM), Zeta potential measurement, fluorescence, UV-VIS, and FTIR spectroscopy. Various experimental variables including pH, QDs concentration and the reaction time were optimized. The proposed study is simply implemented for the therapeutic drug monitoring system (TDMS) and various clinical laboratories for further pharmacokinetic research.

Ultra-sensitive and selective fluorescence approach for estimation of elagolix in real human plasma and content uniformity using boron-doped carbon quantum dots

Elagolix (ELX) is an orally administered non-peptidic GnRH antagonist that has been approved by the Food and Drug Administration in 2018 for the treatment of endometriosis pain. A sensitive and selective method for estimating elagolix (ELX) in human plasma and content uniformity was developed and validated. The spectrofluorimetric technique was used to investigate ELX utilizing boron-doped carbon quantum dots (B@CQDs). After gradually adding ELX, the quantum dots fluorescence was enhanced with LOQ of 1.74 ng mL⁻¹, the calibration curve between ELX and corresponding fluorescence intensity was found over a range of 4–100 ng mL⁻¹. The method was successfully applied in real human plasma with pharmacokinetic study and content uniformity test. The pharmacokinetic parameters as C_max were found to be 570 ± 5.32 ng. mL⁻¹ after 1 h, t_1/2 was found to be 6.50 h, and AUC was found to be 1290 ± 30.33 ng. h. mL⁻¹. B@CQDs were characterized using variety of instruments. The strategy is simple to implement in clinical labs and therapeutic drug monitoring systems.

Exploration of Pull-Push Effect for Novel Photovoltaic Dyes with A-π-D Design: A DFT/TD-DFT Investigation

The π-rich versus π-poor units in 4,6-di(thiophen-2-yl)pyrimidine (DTB) alternating the π-backbone of solar cells dyes have been extended with a push-pull technique to lower their HOMO-LUMO energy gap and to increase Intramolecular Charge Transfer (ICT). Density functional theory was used to optimize the ground state molecular geometries of newly designed dyes (DTB1-DTB6). Time Dependent DFT (TD-DFT) was used to simulate the Uv-vis spectral values at the maximum absorbance values ranging between 481-535 nm. These values were red shifted from DTB value of experimental (333 nm) and theoretical (346 nm). however, their computed absorbance and fluorescence spectra revealed a bathochromic shift of them upon an increasing the solvent polarity. Different DFT functionals such as (B3LYP, CAM-B3LYP, B97XD, and APFD) were employed to choose their proper use Uv-visible analysis to reveal an unexpected coherence at the B3LYP level with experimental values. As a result, the B3LYP with most diffused basis sets of 6-31G + (d,p) were used for further calculations. The parameters of Global Chemical reactivities revealed that all the dyes had a softer nature with their softness value range of 0.27-0.41. their Ionization Potentials (IP) ranged between 6.21-8.10 eV to comply that the new dyes had good electron donating potentials. With a good electron injection potential of -1.47-1.74 eV, aluminum can be the best electrode, while Au is excellent towards a hole injection operation which had the potential range of 1.79-3.68 eV. For Natural Bond Orbital (NBO) assessment, (N14)LP → (F16-F28)π* with stabilization energy of 42.55 kcal/mol was noted for DTB4. Their Second order hyperpolarizability [Formula: see text] values as their Nonlinear Optical (NLO) response ranged between 59.16-232.11 debye-angstrom^-1 which were almost 6 times higher than the reference DTB (8.47D). The NLO attributes has also shown that a dyes with its small bandgap was related with higher hyperpolarizability values. Because of the decreased reorganization frequencies, newly discovered derivatives with electron transfer qualities might be comparable to or equivalent to those of commonly used electron transmission materials.