Synthesis of Nanostructured Based WO3 Materials for Photocatalytic Applications

A facile synthesis of K3PMo12O40/WO3 crystals for effective sonocatalytic performance

Proper treatment of hazardous contaminants in the air, land, and water is crucial to environmental remediation. Sonocatalysis, by using ultrasound and suitable catalysts, has shown its potential in organic pollutant removal. In this work, K₃PMo₁₂O₄₀/WO₃ sonocatalysts were fabricated via a facile solution method at room temperature. Techniques such as powder X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, and X-ray photoelectron spectroscopy were used to characterize the structure and morphology of the products. By using the K₃PMo₁₂O₄₀/WO₃ sonocatalyst, an ultrasound-assisted advanced oxidation process has been developed for the catalytic degradation of methyl orange and acid red 88. Almost all dyes were degraded within 120 min of ultrasound baths, proving that the K₃PMo₁₂O₄₀/WO₃ sonocatalyst has the advantage of speeding up the decomposition of contaminants. The impacts of key parameters, including catalyst dosage, dye concentration, dye pH, and ultrasonic power were evaluated to understand and reach optimized conditions in sonocatalysis. The remarkable performance of K₃PMo₁₂O₄₀/WO₃ in the sonocatalytic degradation of pollutants provides a new strategy for the application of K₃PMo₁₂O₄₀ in sonocatalysis.

A three-dimensional nano-network WO3/F-TiO2-{001} heterojunction constructed with OH-TiOF2 as the precursor and its efficient degradation of methylene blue

In this study, three-dimensional nested WO₃/F-TiO₂-{001} photocatalysts with different WO₃ loadings were prepared by a hydrothermal process and used to degrade methylene blue (MB). The photocatalysts with various ratios of WO₃ to OH-TiOF₂ can be transformed into a three-dimensional network WO₃/F-TiO₂ hetero-structure with {001} surface exposure. The results showed that the composite catalyst with 5% WO₃, denoted as FWT5, had the best comprehensive degradation effect. FWT5 has a limited band gap of 2.9 eV, which can be used as an advanced photocatalyst to respond to sunlight and degrade MB. The average pore diameter of the composite catalyst is 10.3 nm, and the multi-point specific surface area is 56 m² g⁻¹. Compared with pure TiOF₂, the average pore size of the composite catalyst decreased by 8.44 nm and the specific surface area increased by 51.2 m² g⁻¹, which provides a larger contact space for the catalytic components and pollutants. Moreover, TiO₂ on the {001} surface has higher photocatalytic activity and methylene blue can be better degraded. Under the irradiation of 0.03 g FWT5 composite catalyst with a simulated solar light source for 2 h, the degradation rate of 10 mg L⁻¹ methylene blue can reach 82.9%. The trapping experiment showed that photo-generated holes were the principal functional component of WO₃/F-TiO₂-{001} photo-catalysis, which could capture OH⁻ and form hydroxyl radical (˙OH) and improved the photocatalytic degradation performance. Kinetic studies show that the photocatalytic degradation of MB fits with the quasi-first order kinetic model.

A new type of WO₃/F-TiO₂-{001} heterostructure semiconductor material with a three-dimensional network structure was successfully prepared by the hydrothermal method.

Synthesis Design of Electronegativity Dependent WO3 and WO3∙0.33H2O Materials for a Better Understanding of TiO2/WO3 Composites’ Photocatalytic Activity

The design of a semiconductor or a composite semiconductor system—with applications in materials science—is complex because its morphology and structure depend on several parameters. These parameters are the precursor type, solvent, pH of the solution, synthesis approach, or shaping agents. This study gives meaningful insight regarding the synthesis design of such WO3 materials. By systematically alternating the precursor (sodium tungstate dihydrate—NWH, or ammonium tungstate hydrate—AMT), subsequently shaping the agents (halide salts—NaX, KX, or hydrohalic acids—HX; X = F−, Cl−, Br−, I−), we have obtained WO3 semiconductors by hydrothermal treatment, which in composite systems can enhance the commercial TiO2 photocatalytic activity. We investigated three sample series: WO3-NWH-NaX/WO3-NWH-KX and, subsequently, WO3-AMT-HX. The presence of W+5 centers was evidenced by Raman and X-ray photoelectron spectroscopy. W+5 and W+6 species affected the band gap values of the NaX and KX series; a higher percentage of W+5 and, subsequently, W+6 caused a redshift, while, regarding the HX series, it led to a blue shift. Increased electronegativity of the halide anions has an unfavorable effect on the composites’ photoactivity. In contrast, in the case of hydrohalic acids, it had a positive impact.

A nickel molybdenum oxide nanoarray as an efficient and stable electrocatalyst for overall water splitting

Experimental and DFT calculation results show that the presence of oxygen vacancies can decrease the adsorption energy of intermediates at active sites and facilitate their adsorption, thus improving the catalytic properties.

Facile synthesis of a novel nitrogen-doped carbon dot adorned zinc oxide composite for photodegradation of methylene blue

Nitrogen-doped carbon dot decorated zinc oxide nanoparticles were successfully fabricated by an economical wet-impregnation method and used as a photocatalyst for the degradation of aqueous methylene blue dye under UV-light at room temperature.