Magnetic Zinc Ferrite–Alginic Biopolymer Composite: As an Alternative Adsorbent for the Removal of Dyes in Single and Ternary Dye System

Lanthanum-based magnetic biopolymers for brilliant green removal from aqueous solutions

In this study, lanthanum (La)-based magnetic biopolymers were synthesized, and the first adsorption study was conducted on the removal of brilliant green dye from aqueous water with these biopolymers. For the adsorption study, adsorption parameters were investigated and the ideal adsorption conditions determined for the removal of brilliant green dye from aqueous solutions are pH 11, t 60 min, m 10 mg, C0 25 mg/L, T 298 K. It was determined that the adsorption process was compatible with the single-layer Langmuir isotherm, and maximum adsorption capacity obtained according to the Langmuir isotherm was calculated as 256.41 mg/g. The adsorption process was found to be in accordance with the pseudo-second-order, and the adsorption process was explained by intra-particle diffusion. According to studies of adsorption thermodynamics, it has been established that the nature of the adsorption reaction is spontaneous, and this process is endothermic and has increasing randomness. Moreover, the reusability of magnetic lanthanum/alginate (La/Alg) biopolymers was investigated, and it was determined that the biopolymers could be used successfully. In summary, brilliant green dye has been successfully removed with simple, low-cost, environmentally friendly, and easily obtained magnetic La/Alg biopolymers. It can be stated that even low amounts of these biopolymers can be effective in the treatment of highly concentrated dye wastewaters.

Efficient removal of crystal violet dye from water using zinc ferrite-polyaniline nanocomposites

Nanomaterials are widely employed in wastewater treatment, among which nanoferrites and their composites hold significant prominence. This study adopts a green approach to synthesize zinc ferrite nanoparticles, subsequently integrating them with polyaniline (PANI) to fabricate the ZnFe2O4-PANI nanocomposite. Characterization of the prepared ZnFe2O4-PANI nanocomposite was conducted using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopic (SEM) techniques. Using Scherrer's equation, the crystallite size of the synthesized zinc ferrite nanoparticles was found to be 17.67 nm. SEM micrographs of the ZnFe2O4-PANI nanocomposite revealed that in situ polymerization of ZnFe2O4 with polyaniline transforms the amorphous surface morphology of the polymer into a homogeneous nanoparticle structure. The adsorption of crystal violet (CV) dye onto the surface of the ZnFe2O4-PANI nanocomposite depends on pH, adsorbent dosage, temperature, concentration levels and duration. The Langmuir adsorption model fitted the data well, indicating adherence to a pseudo-second-order kinetic pattern. Thermodynamic values ΔG°, ΔH° and ΔS° indicated that the adsorption process occurred spontaneously. Advantages and disadvantages of the technique have also been highlighted. Mechanism of adsorption is discussed. From the obtained results, it is evident that the ZnFe2O4-PANI nanocomposite holds promise as a sorbent for the removal of dye from wastewater.

Efficient Photocatalytic Degradation of Congo Red Dye Using Facilely Synthesized and Characterized MgAl2O4 Nanoparticles

The discharge of congo red dye into water sources by factories has been associated with a range of health concerns, such as cancer, redness, skin irritation, and allergic reactions. As a result, this research focused on the cost-effective and straightforward production of MgAl2O4 nanoparticles by using the Pechini sol-gel process. Subsequently, these nanoparticles were employed for the successful photocatalytic decomposition of congo red dye. Moreover, extensive characterization of the fabricated MgAl2O4 nanoparticles was conducted through diverse methodologies, which included Fourier-transform infrared spectroscopy, ultraviolet-visible spectrophotometry, high-resolution transmission electron microscopy (HR-TEM), field-emission scanning electron microscopy (FE-SEM), and powder X-ray diffraction (XRD). Furthermore, the XRD analysis disclosed that the average crystal size of the produced MgAl2O4 nanoparticles is 10.36 nm, and their optical energy gap was determined to be 3.71 eV. The FE-SEM examination unveiled a combination of spherical and disorganized structures with a 0.14 μm average grain size. HR-TEM analysis, in turn, revealed that the fabricated MgAl2O4 nanoparticles were composed of minuscule spherical particles with an average diameter of 8.75 nm. The maximum degradation of 50 mL of congo red dye at a concentration of 25 mg/L reached 99.27% within 80 min at a pH of 3. Additionally, the findings confirmed the consistent decomposition activity toward congo red dye even after four cycles, thereby validating the effectiveness and reusability of the MgAl2O4 nanoparticles that were developed in this study.

Acidic modification of natural stone for Remazol Black B dye adsorption from aqueous solution- central composite design (CCD) and response surface methodology (RSM)

This study investigated the adsorption capacity of Remazol Black B (RBB) from aqueous solutions using a pumice stone as a cheap, high-frequent, and available adsorbent. The raw pumice was modified using five acids: Acetic, Sulfuric, Phosphoric, Nitric, and Hydrochloric acid. Fourier transform infrared spectrograph (FTIR), x-ray fluorescence (XRF), and scanning electron microscopy (SEM) were used to analyze the morphological and chemical properties of raw and modified adsorbents. The adsorption capacity equilibrium was investigated using the Langmuir, Freundlich, Temkin, and Dubinin - Radushkevich isotherms. The results indicated that the data are well-fitted with Langmuir isotherm. The maximum adsorption capacity was observed when pumice modified with H₂SO₄ (q_m = 10.00 mg/g) was used, and the RBB removal efficiency was higher than that for raw pumice (q_m = 5.26 mg/g). Also, the results were best fitted with pseudo-second-order kinetic. The experiments indicated that increasing the RBB concentration reduces the efficiency of adsorbents while increasing the contact time and adsorbent doses improved the RBB removal efficiency. Accordingly, it can be concluded that pumice stone modified with various acids can be considered a cheap adsorbent with high efficiency in removing RBB from industry effluent.

Preparation, Antibacterial Activity, and Catalytic Application of Magnetic Graphene Oxide-Fucoidan in the Synthesis of 1,4-Dihydropyridines and Polyhydroquinolines

Polymer-coated magnetic nanoparticles are emerging as a useful tool for a variety of applications, including catalysis. In the present study, fucoidan-coated magnetic graphene oxide was synthesized using a natural sulfated polysaccharide. The prepared BaFe12 O19 @GO@Fu (Fu=fucoidan, GO=graphene oxide) was characterized using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) analysis, vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), Raman spectroscopy, and X-ray diffraction (XRD). The catalytic proficiency of BaFe12 O19 @GO@Fu was investigated in the synthesis of 1,4-dihydropyridine and polyhydroquinoline derivatives. Excellent turnover numbers (TON) and turnover frequencies (TOF) (6330 and 25320 h-1 ) testify to the high efficiency of the catalyst. Moreover, the antimicrobial activity of BaFe12 O19 @GO@Fu was evaluated against Escherichia coli (E. coli), and Staphylococcus aureus (S. aureus) through the Agar well diffusion method, indicating that BaFe12 O19 @GO@Fu has antibacterial activity against S. aureus.

Synchronous role of coupled adsorption and photocatalytic oxidation on the hybrid nanomaterials of pectin and nickel ferrite leads to the excellent removal of toxic dye effluents

Ecofriendly and robust hybrid nanomaterials of pectin and nickel ferrite were succesfully employed for the adsorptive degradation of toxic dye molecules in waste water treatment.